Author Topic: [SOLVED] 8.10 beta 2 - installation problems  (Read 10185 times)

d1v3rdown

  • Newbie
  • *
  • Posts: 4
    • View Profile
    • Fiquett.com
[SOLVED] 8.10 beta 2 - installation problems
« on: December 22, 2009, 08:02:29 pm »
I have been trying for 2 days to get linuxmce 8.10 setup on the box i just built for my core/md hybrid.

here's the specs:

ASUS P5Q-EM mobo (has built-in hdmi)
INTEL 3.0 GHZ E8400
4 GB CORSAIR DDR2 800 Mhz
Hauppauge 1600 1199
PNY NVIDIA Geforce 9800GT 1GB
ANTEC 550 PSU
WD Black 1 TB
Silverstone Lascala Case

Scenario:

Before i purchased and installed the PNY NVIDIA 9800GT, using vga moniter and regular audio
Installed kunbuntu 8.10 from dvd
Installed linuxmce from internet
Setup linuxmce using static video option and the greetings video's with the lady played fine.
ripped a dvd to hd
played that dvd fine

so now drumroll, i tried to get it setup to work with my 42-inch Samsung LCD over hdmi.
rebooted machine and held shift
AVWizard started, setup with DVD/HDMI 1, and HIGH video settings - OpenGL.blabla
Rebooted and Failed to start X
relaunched AVWizard from commandline
Chose the static overlay low video settings again.
I was not happy with graphics

Went to Bestbuy and purchase the PNY NVIDIA Geforce 9800GT 1GB.
Installed and still had problems.
Finally edited the /boot/grub/menu.1st and added vmalloc=256MB, because i read and it seemed that the hauppauge 1600 was loading before the graphics card and stealing the memory
installed the NVIDIA 190.53 drivers thru commandline

" wget http://us.download.nvidia.com/XFree86/Linux-x86/190.53/NVIDIA-Linux-x86-190.53-pkg1.run"
"sh NVIDIA-Linux-x86-190.53-pkg1.run "
"nvidia-xconfig"

launched AVWizard, selected HDMI and High Graphics again.
Rebooted and Orbiter Generated fine, viola fliker pictures floating by and nice transparent menus.

Now the problem is video, and dvd's.
open the dvd drive and pop in a movie, then it says disc loaded and the name of the movie.
however when i select play from the Manage Drives or from the Video menu, it just flashes briefly and the flicker pictures keeps rolling
i move the mouse and there is a big white play/pause button and mute button in bottom right corner.
so i go back to the setup wizard, now the greeting video's with the lady will not play. no video's will play.
spent couple hours researching online and trying stuff via commandline. NO SUCESS

So then i decide maybe i just need to reload,
I select the Install Linuxmce from the DVD this time and followed the steps
more of same problems, never got far enough to get orbiter to generate

So then i decided to reload Kubuntu 8.10 from the dvd and then do the internet installation like the first time.
before i ran the linuxmce install scripts, i figured i would try to get the kubuntu installation to play a dvd first.
did all of the same steps
aptitude update
aptitude dist-upgrade
aptitude upgrade
sudo apt-get install linux-restricted-extras

tried to play dvd from mplayer and got a video out -vo error. tried most of the drivers under the preferences of mplayer and still no success.
checked the nvidia server program under settings and it had all the information for my graphics card and i adjusted the overscan a little to see everything on the screen.


Also i have not been able to get any audio over the hdmi. ( i attached the spdif jumper from the mobo to the 9800gt)

i 've played with motherboard settings, i changed the audio setting to SPDIF out instead of hdmi. and tried the PEG:PCI option.
I really don't know what i need to set bios options.

SO AFTER almost 2 days straight of working on this, but I'm back at square 1. Please someone have the answer or suggestions.  :-\
« Last Edit: December 24, 2009, 06:58:13 am by d1v3rdown »
Core/Hybrid MD
Motherboard: ASUS P5Q-EM Intel G45 775
CPU: Intel® Core™ 2 Duo Processor E8400
GPU: PNY - NVIDIA GeForce 9800 GT 1GB GDDR3 PCI Express
Hauppauge 1199 WinTV HVR-1600

tkmedia

  • wants to work for LinuxMCE
  • **
  • Posts: 937
    • View Profile
    • LMCECompatible
Re: 8.10 beta - installation problems
« Reply #1 on: December 22, 2009, 09:03:05 pm »
My Setup http://wiki.linuxmce.org/index.php/User:Tkmedia

For LinuxMce compatible  systems and accessories
http://lmcecompatible.com/

d1v3rdown

  • Newbie
  • *
  • Posts: 4
    • View Profile
    • Fiquett.com
Re: 8.10 beta - installation problems
« Reply #2 on: December 22, 2009, 10:51:35 pm »
wow i thought i remember trying your solution, just in case

i ran this and it worked..thank you Tim!! ;)

wget http://www.avenard.org/files/ubuntu-repos/ubuntu-repos.key && sudo apt-key add ubuntu-repos.key && rm ubuntu-repos.key

and then added

deb http://www.avenard.org/files/ubuntu-repos intrepid release

to my  /etc/apt/sources.list

then did sudo apt-get update

then

#sudo apt-get install nvidia-glx-195

nvidia-xconfig and reboot

so now the mplayer will play my dvd

However i think i may have messed something up trying to get video to work earlier, when i clicked the linuxmce install link on the desktop, i got a bunch of error's, so i'm going to reinstall and then use your solution to fix the video

however still no audio.

i have a bose unit connected via optical to my tv, when i put the tv on the hdmi port for my core/md , the bose does say PCM but i cannot get any audio out

like i said before i have the spdif cable connected to the spdif + and gnd on the mobo and then it plugs into the top of my graphics card. my video card has two dvi outputs and i am connecting to hdmi with a dvi -> hdmi adapter that came with kit. It is supposed to support passthrough, however i just can't get my configuration correct between the mobo settings and the kunbuntu settings.

i think i am going to wait and try to get the audio working before i reinstall linuxmce 8.10 beta 2. if i can get it working with just kubuntu 8.10 then i should be able to fix video and audio again after kubuntu installs but before linuxmce installs. then hopefully all is good!!!!

any ideas on the audio?

« Last Edit: December 23, 2009, 12:16:31 am by d1v3rdown »
Core/Hybrid MD
Motherboard: ASUS P5Q-EM Intel G45 775
CPU: Intel® Core™ 2 Duo Processor E8400
GPU: PNY - NVIDIA GeForce 9800 GT 1GB GDDR3 PCI Express
Hauppauge 1199 WinTV HVR-1600

tkmedia

  • wants to work for LinuxMCE
  • **
  • Posts: 937
    • View Profile
    • LMCECompatible
Re: 8.10 beta - installation problems
« Reply #3 on: December 23, 2009, 01:06:45 am »
make sure nothing is muted under alsamixer IEC958 I think is the one .




HTH


Tim
My Setup http://wiki.linuxmce.org/index.php/User:Tkmedia

For LinuxMce compatible  systems and accessories
http://lmcecompatible.com/

d1v3rdown

  • Newbie
  • *
  • Posts: 4
    • View Profile
    • Fiquett.com
Re: 8.10 beta - installation problems
« Reply #4 on: December 23, 2009, 07:14:55 am »
thanks but i tried unmuting in alsa mixer.. still no sound

figured out to get my dvd playing in the pluto-xine, i had to change /etc/pluto/xine.conf and set audio to none instead of auto or alsa temporarily.
i looked at xine's logs and it was stopping because of audio error

so now im trying to figure out how to setup my audio

when i run lsmod
Code: [Select]
root@dcerouter:/dev# lsmod
Module                  Size  Used by
udf                    88484  0
crc_itu_t              10112  1 udf
xt_TCPMSS              12160  1
ipt_MASQUERADE         10752  1
ipt_TTL                 9984  1
iptable_mangle         10880  1
xt_tcpudp              11008  6
xt_mark                10112  1
xt_state               10112  1
iptable_nat            13448  1
sco                    18308  2
bridge                 56980  0
stp                    10628  1 bridge
bnep                   20352  2
rfcomm                 44432  0
l2cap                  30464  6 bnep,rfcomm
bluetooth              62180  6 sco,bnep,rfcomm,l2cap
nfsd                  231024  13
lockd                  71976  1 nfsd
nfs_acl                11264  1 nfsd
auth_rpcgss            42528  1 nfsd
sunrpc                196960  13 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs               12544  1 nfsd
ppdev                  15748  0
autofs4                27780  1
acpi_cpufreq           15500  0
cpufreq_userspace      11396  0
cpufreq_ondemand       14988  2
cpufreq_stats          13188  0
cpufreq_conservative    14600  0
freq_table             12672  3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_powersave       9856  0
video                  25488  0
output                 11008  1 video
pci_slot               12680  0
wmi                    14504  0
container              11520  0
sbs                    19464  0
sbshc                  13440  1 sbs
battery                18436  0
af_packet              25856  4
iptable_filter         10752  1
ip_tables              19600  3 iptable_mangle,iptable_nat,iptable_filter
x_tables               22916  8 xt_TCPMSS,ipt_MASQUERADE,ipt_TTL,xt_tcpudp,xt_mark,xt_state,iptable_nat,ip_tables
ac                     12292  0
nf_nat_irc             10240  0
nf_nat_ftp             10880  0
nf_nat                 25368  4 ipt_MASQUERADE,iptable_nat,nf_nat_irc,nf_nat_ftp
nf_conntrack_irc       13348  1 nf_nat_irc
nf_conntrack_ftp       15652  1 nf_nat_ftp
nf_conntrack_ipv4      21772  4 iptable_nat,nf_nat
nf_conntrack           72032  9 ipt_MASQUERADE,xt_state,iptable_nat,nf_nat_irc,nf_nat_ftp,nf_nat,nf_conntrack_irc,nf_conntrack_ftp,nf_conntrack_ipv4
sbp2                   29324  0
parport_pc             39332  0
lp                     17156  0
parport                42604  3 ppdev,parport_pc,lp
mxl5005s               50052  1
s5h1409                17156  1
tuner_simple           22288  1
tuner_types            21888  1 tuner_simple
cs5345                 11124  0
tuner                  33096  0
cx18                   96960  2
dvb_core               86144  1 cx18
videodev               41344  2 tuner,cx18
v4l1_compat            22404  1 videodev
compat_ioctl32          9344  1 cx18
i2c_algo_bit           14340  1 cx18
snd_hda_intel         385072  0
snd_pcm                83204  1 snd_hda_intel
cx2341x                20996  1 cx18
prism2_usb             80260  0
snd_seq                57776  0
p80211                 38536  1 prism2_usb
v4l2_common            19840  4 cs5345,tuner,cx18,cx2341x
snd_timer              29960  2 snd_pcm,snd_seq
tveeprom               20228  1 cx18
snd_seq_device         15116  1 snd_seq
evdev                  17696  10
snd                    63396  5 snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
psmouse                45200  0
soundcore              15328  1 snd
pcspkr                 10624  0
serio_raw              13444  0
snd_page_alloc         16136  2 snd_hda_intel,snd_pcm
nvidia               8889956  60
i2c_core               31892  10 mxl5005s,s5h1409,tuner_simple,cs5345,tuner,cx18,i2c_algo_bit,v4l2_common,tveeprom,nvidia
button                 14224  0
intel_agp              33980  0
agpgart                42184  2 nvidia,intel_agp
shpchp                 38036  0
pci_hotplug            34976  1 shpchp
ipv6                  264356  36
ext3                  133384  1
jbd                    55956  1 ext3
mbcache                16004  1 ext3
sr_mod                 22212  0
sd_mod                 42392  3
crc_t10dif              9984  1 sd_mod
cdrom                  43168  1 sr_mod
sg                     39732  0
pata_acpi              12160  0
usbhid                 35712  0
hid                    50560  1 usbhid
ata_piix               24708  2
ohci1394               37936  0
ata_generic            12932  0
ieee1394               96324  2 sbp2,ohci1394
libata                178336  3 pata_acpi,ata_piix,ata_generic
scsi_mod              155468  5 sbp2,sr_mod,sd_mod,sg,libata
dock                   16656  1 libata
r8169                  37636  0
mii                    13440  1 r8169
uhci_hcd               30864  0
ehci_hcd               43788  0
usbcore               149616  5 prism2_usb,usbhid,uhci_hcd,ehci_hcd
floppy                 64644  0
raid10                 30464  0
raid456               135184  0
async_xor              11520  1 raid456
async_memcpy           10112  1 raid456
async_tx               15312  3 raid456,async_xor,async_memcpy
xor                    23688  2 raid456,async_xor
raid1                  30080  0
raid0                  15488  0
multipath              15104  0
linear                 13440  0
md_mod                 94108  6 raid10,raid456,raid1,raid0,multipath,linear
thermal                23708  0
processor              42156  2 acpi_cpufreq,thermal
fan                    12548  0
fbcon                  47648  0
tileblit               10880  1 fbcon
font                   16512  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit
fuse                   60956  1
compcache              13004  1
lzo_decompress         10880  1 compcache
lzo_compress           10880  1 compcache
tlsf                   14220  1 compcache

aplay -l was showing
Code: [Select]
root@dcerouter:/usr/share/sounds# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
and
Code: [Select]
root@dcerouter:/usr/share/sounds# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
root@dcerouter:/usr/share/sounds# nano /etc/asound.conf
root@dcerouter:/usr/share/sounds# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
root@dcerouter:/usr/share/sounds# aplay -L
front:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    Front speakers
surround40:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
    HDA Intel, ALC888 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
    HDA Intel, ALC888 Digital
    IEC958 (S/PDIF) Digital Audio Output
null

until i ran /usr/share/alsa-base/snddevices
now it looks like this
Code: [Select]
root@dcerouter:/dev# aplay -l
aplay: device_list:217: no soundcards found…
root@dcerouter:/dev# aplay -L
root@dcerouter:/dev#

currently what my /etc/asound.conf looks like after playing around
Code: [Select]
pcm_slave.spdif_convert48k {
        pcm "spdif"
        rate 48000
}

pcm.spdif_playback {
        type plug
        slave spdif_convert48k
}

pcm_slave.hdmi_convert48k {
        pcm "hdmi"
        rate 48000
}

pcm.hdmi_playback {
        type plug
        slave hdmi_convert48k
}

pcm.asym_spdif {
        type asym
        playback.pcm "spdif_playback"
        capture.pcm "plughw:0"
}

pcm.asym_hdmi {
        type asym
        playback.pcm "hdmi_playback"
        capture.pcm "plughw:0"
}

pcm.asym_analog {
        type asym
        playback.pcm "plug:dmix"
        capture.pcm "plughw:0"
}

pcm.!default {
        type plug
        slave.pcm {
        type hw
        card Intel
        device 1
        subdevice 0
}
}

getting this audio working is the final problem, please help!!!
Core/Hybrid MD
Motherboard: ASUS P5Q-EM Intel G45 775
CPU: Intel® Core™ 2 Duo Processor E8400
GPU: PNY - NVIDIA GeForce 9800 GT 1GB GDDR3 PCI Express
Hauppauge 1199 WinTV HVR-1600

d1v3rdown

  • Newbie
  • *
  • Posts: 4
    • View Profile
    • Fiquett.com
Re: 8.10 beta - installation problems
« Reply #5 on: December 24, 2009, 06:56:52 am »
problem solved..after another whole day..

used the alsa update script found here http://ubuntuforums.org/showthread.php?t=1046137 to upgrade from 1.0.17 to 1.0.19 (tried 1.0.22 but no soundcards were detected)

changed the options from
Code: [Select]
DRIVER=alsa-driver-1.0.21
FIRMWARE=alsa-firmware-1.0.20
LIB=alsa-lib-1.0.21
PLUGINS=alsa-plugins-1.0.21
UTILS=alsa-utils-1.0.21
TOOLS=alsa-tools-1.0.21
OSS=alsa-oss-1.0.17

to
Code: [Select]
DRIVER=alsa-driver-1.0.19
FIRMWARE=alsa-firmware-1.0.19
LIB=alsa-lib-1.0.19
PLUGINS=alsa-plugins-1.0.19
UTILS=alsa-utils-1.0.19
TOOLS=alsa-tools-1.0.19
OSS=alsa-oss-1.0.17

to install 1.0.19 and then re-ran avwizard and now im getting pcm, dolby 5.1 over the hdmi…whoohoo ;)

i can finally sleep!

Core/Hybrid MD
Motherboard: ASUS P5Q-EM Intel G45 775
CPU: Intel® Core™ 2 Duo Processor E8400
GPU: PNY - NVIDIA GeForce 9800 GT 1GB GDDR3 PCI Express
Hauppauge 1199 WinTV HVR-1600