Author Topic: DVB Cards info needed for Templates  (Read 166925 times)

blahbla

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #150 on: July 21, 2010, 03:52:57 pm »
TerraTec Cinergy 1200 DVB-C

I currently use kernel 2.6.34 because of mantis (s2-liplianin) driver

sudo lspci -vn
02:07.0 0480: 1822:4e35 (rev 01)
        Subsystem: 153b:1178
        Flags: bus master, medium devsel, latency 32, IRQ 17
        Memory at fdfff000 (32-bit, prefetchable) [size=4K]
        Kernel driver in use: Mantis

sudo v4l2-ctl -n
Failed to open /dev/video0: No such file or directory

cfernandes

  • Guru
  • ****
  • Posts: 359
    • View Profile
    • my company web site
Re: DVB Cards info needed for Templates
« Reply #151 on: August 08, 2010, 03:51:20 pm »
Capture Card Zogis Real Angel 220

lspci -vn

02:03.0 0480: 1131:7130 (rev 01)
        Subsystem: 1131:0000
        Flags: bus master, medium devsel, latency 32, IRQ 18
        Memory at f2001000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [40] Power Management version 1
        Kernel driver in use: saa7134
        Kernel modules: saa7134

 v4l2-ctl -n
ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : Television
        Type    : 0x00000001
        Audioset: 0x00000001
        Tuner   : 0x00000000
        Standard: 0x0000000000FFBFFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 1
        Name    : Composite1
        Type    : 0x00000002
        Audioset: 0x00000001
        Tuner   : 0x00000000
        Standard: 0x0000000000FFBFFF ( PAL NTSC SECAM )
        Status  : 65792

        Input   : 2
        Name    : S-Video
        Type    : 0x00000002
        Audioset: 0x00000001
        Tuner   : 0x00000000
        Standard: 0x0000000000FFBFFF ( PAL NTSC SECAM )
        Status  : 0


« Last Edit: August 14, 2010, 11:23:37 pm by cfernandes »

brake16

  • Veteran
  • ***
  • Posts: 85
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #152 on: September 03, 2010, 09:47:41 pm »
Mandingo

I don't want to mess with your wiki table cuz it's so nice...but the HD-PVR doesn't have a TV tuner, just video & audio inputs.  From a nit-picky standpoint, it probably shouldn't say NTSC/ATSC, but from a practical standpoint it should be usable in all locations (Not just North America).  I'm not sure of the best way to modify the wiki table to reflect this.

A related question about the wiki entry: what is the meaning behind the star ratings?  Do they reflect abilities, ease of use, capture quality?

Awesome work on this.  Thanks for what you've done.

Bryce
The Second Empirical Law of Lasers is to not look into the beam with your remaining good eye  - Anonymous

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #153 on: September 04, 2010, 05:33:21 am »
Mandingo

I don't want to mess with your wiki table cuz it's so nice...but the HD-PVR doesn't have a TV tuner, just video & audio inputs.  From a nit-picky standpoint, it probably shouldn't say NTSC/ATSC, but from a practical standpoint it should be usable in all locations (Not just North America).  I'm not sure of the best way to modify the wiki table to reflect this.

A related question about the wiki entry: what is the meaning behind the star ratings?  Do they reflect abilities, ease of use, capture quality?

Awesome work on this.  Thanks for what you've done.

Bryce

Thanks ill make those changes

NOTE I WILL BE PUSHING UP THE LATEST VERSION OF MYTH WITHIN A FEW WEEKS

This should take care of some bug issues

Thanks Mandingo
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

Avner

  • Veteran
  • ***
  • Posts: 76
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #154 on: September 09, 2010, 01:09:16 am »
;D

Current Cards that are now in the system are !!!

WinTV-PVR-150
...
WinTV-HVR-1850
WinTV-HVR-1950
WinTV-HVR-2250
...
 ;D

I will be adding more later today but i need those mentioned tested and i still need alot of vendor id's so please keep the card info comming
as mention before there will be a deb supplied with the templates when complete that will handle the driver issue for some of the cards. 
There will be a final change on the cards once a bug has been fixed for the mythtv plugin...

Mandingo

Mandingo,
Hauppauge WinTV-HVR-1850 is not in the system, at least not for me. LinuxMCE fails to load the cx23885 driver that the card uses. I also tried loading the prebuilt drivers and to build them from source. Both attempts failed. Please see  http://forum.linuxmce.org/index.php?topic=10649.0
Asus P5GD2-X, Intel i915P/G, Pentium 4 3.2 GHz, 2.5GB, nvidia Geforce 8800, Hauppauge WinTV-HVR-1850

CHRlS

  • Making baby steps
  • Posts: 2
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #155 on: September 21, 2010, 02:58:26 pm »
Hi Mandingo,

here is another card, seems no one posted before:

Card Type: DVB-S2 Dual Tuner PCIe
Vendor: Digital Devices (Micronas Chipset, same as e.g. Linux4Media CineS2, Mystique Satix-S2, Mediapointer and others)
Model: Cine S2
Full Name: Digital Devices Cine S2

It is running really stable on both channels with very fast channel switching times on the CVN 23261 using VDR...while choosing Myth, the installation is crashing down...

Short:
02:00.0 0400: 18c3:0720
        Subsystem: 18c3:abc4
        Flags: bus master, fast devsel, latency 0, IRQ 19
        Memory at faef0000 (32-bit, non-prefetchable) [size=64K]
        Memory at faee0000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [40] Power Management version 2
        Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [58] Express Endpoint, MSI 00
        Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00
        Capabilities: [400] Virtual Channel <?>
        Kernel driver in use: ngene
        Kernel modules: ngene

Long:
02:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Device [18c3:0720]
        Subsystem: Micronas Semiconductor Holding AG Device [18c3:abc4]                        
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes                                                                
        Interrupt: pin A routed to IRQ 19                                                                    
        Region 0: Memory at faef0000 (32-bit, non-prefetchable) [size=64K]                                  
        Region 1: Memory at faee0000 (64-bit, non-prefetchable) [size=64K]                                  
        Capabilities: [40] Power Management version 2                                                        
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)                  
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-                                                  
        Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-                      
                Address: 0000000000000000  Data: 0000                                                        
        Capabilities: [58] Express (v1) Endpoint, MSI 00                                                    
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us                        
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-                                      
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-                          
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+                                        
                        MaxPayload 128 bytes, MaxReadReq 512 bytes                                          
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-                          
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited      
                        ClockPM- Suprise- LLActRep- BwNot-                                                  
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-                              
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-                                      
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Device Serial Number 00-11-3c-20-07-00-00-00
        Capabilities: [400] Virtual Channel <?>
        Kernel driver in use: ngene
        Kernel modules: ngene

GreetingZ,

CHRlS


« Last Edit: September 23, 2010, 10:55:52 am by CHRlS »

RayBe

  • Guru
  • ****
  • Posts: 315
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #156 on: October 04, 2010, 10:01:35 am »
Hi Mandingo,
thanks for your superb list,
but there are some broken links in it, its just a type i guess :):
hauppage is written with 2 'p' some links have only 1 'p' in it  ;).

another thing i want to mention about the section 'ATSC/NTSC Cards (only in US/Canada )',
the hauppage-cards are also available in the EU, they are labeled as 'analog tv-cards' and therefore (i think) should work in the EU also.
don't know if the other cards in this section are also available in the EU.

hth,
br,
Raymond
« Last Edit: October 04, 2010, 10:15:47 am by RayBe »
When you were born, you were crying and everybody else was laughing.
Live your life so when you die, you are laughing and everybody else is crying.

foverton

  • First post!
  • Posts: 1
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #157 on: December 04, 2010, 11:42:28 pm »
I have the Hauppauge 950Q USB Tuner and it installed and works great in LMCE. NICE JOB!
I have read on various web forums that MythTV users are now getting the Analog (specifically composite) side of this card working as well.
What is the status of this in LMCE? (It is certainly a feature I would like)
Lemme know if there is anything I can do to help with this test/implement this feature.
Thanks!

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5549
  • DOES work for LinuxMCE.
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #158 on: December 05, 2010, 04:17:14 am »
Due to the way LinuxMCE uses the tuner inputs, any tuner support must have MPEG acceleration (that is, we must be able to open /dev/videoX and be able to get a compressed and playable stream, not a V4L stream from it.). The 950 does not have this on the Analogue side of it, therefore we will not support the analogue side of it for this purpose.

-Thom

Hdale85

  • First post!
  • Posts: 1
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #159 on: December 16, 2010, 09:19:34 pm »
I have a Kworld ATSC 110. All the info you likely need should be in this wiki post it seems. If you need me to do an lspci I will work on that.

http://www.linuxtv.org/wiki/index.php/KWorld_ATSC_110#Sample_kernel_output

gtsupport

  • Veteran
  • ***
  • Posts: 147
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #160 on: December 19, 2010, 09:21:58 pm »
Hi,
I'm using a Hauppauge WinTV HVR2200
It has an Aerial input, an FM input, a SVHS input, plus a 3.5mm Jack for audio

here is output from lspci -vn

http://pastebin.com/93scP9re

dcerouter_1:/home/matt# v4l2-ctl -n
Failed to open /dev/video0: No such file or directory
« Last Edit: December 19, 2010, 09:38:13 pm by gtsupport »
LinuxMCE - If it was easy, everybody would be doing it!!

am

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #161 on: December 23, 2010, 04:04:07 pm »
I have connected one HD-PVR, one HVR 2250 and one 950Q that will record black .mpg space....
outputs attached

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #162 on: December 23, 2010, 11:20:59 pm »
am could you do me a favor and post the info directly into the thread based on how i asked and how others have posted there info or could you reformat your link as so it is readable

Thanks

Mandingo
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

Zaerc

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 2256
  • Department of Redundancy Department.
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #163 on: December 29, 2010, 10:50:42 pm »
I am newbie in this forum and glad to join
I am admin in this forum and glad to kick spammers like you out.
"Change is inevitable. Progress is optional."
-- Anonymous


l3mce

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1084
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #164 on: February 17, 2011, 09:51:43 pm »
Avermedia 780m pcie combo tuner

Fresh dmesg:
http://pastebin.com/CKCxhnMs

With native FW (skipping the script), using the other drivers:
Code: [Select]
hg clone http://kernellabs.com/hg/~dheitmueller/ngene3
cd ngene3
make
make install

http://pastebin.com/Q0p38GVP make
http://pastebin.com/RVy6XuLF make install

Resulting in this dmesg
http://pastebin.com/g5s4zwCp

Vendor ID: 18c307201461062e

sudo lspci -vn
http://pastebin.com/Wju59bCr

sudo v4l2-ctl -n
Code: [Select]
Failed to open /dev/video0: No such file or directory
1 Digital ATSC/QAM in
1 Analog "HD" in
1 S-Video in
1 Audio in

Currently have 2 installed, working well on ATSC for both. Myth behaving famously. Though a little top heavy:

11696 root      19  -1  186m 169m 103m R   90  5.0  26:27.09 Xorg               
18553 root      20   0  410m 241m 121m S   40  7.1  16:49.35 mythfrontend       
 9546 mythtv    20   0  323m  51m  14m S    2  1.5   1:01.44 mythbackend     

I cannot get VDPAU working on core (Asus M3N78-VM) w/on board 8200 for other media, have not tried with myth.   

model name      : AMD Athlon(tm) II X2 240 Processor
stepping        : 2
cpu MHz         : 2799.955
cache size      : 1024 KB
« Last Edit: February 18, 2011, 01:14:28 am by l3mce »
I never quit... I just ping out.