Author Topic: DVB Cards info needed for Templates  (Read 55499 times)

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: HVR-4000
« Reply #120 on: May 23, 2010, 08:05:35 am »
NOW PNP

Mandingo, here's my info:

sudo lspci -vn > lspci.txt is attached

This is what I did to get the correct firmware:
Code: [Select]
* delving into firmware of HVR-4000
** look here for [[http://ubuntuforums.org/showpost.php?p=8217434&postcount=6][info]]
  
   -rw-r--r-- 1 root root 32522 2009-11-01 21:57 /lib/firmware/dvb-fe-cx24116.fw
   md5sum /lib/firmware/dvb-fe-cx24116.fw
   417cafd3b10e207e1dba9a03ad63e405 /lib/firmware/dvb-fe-cx24116.fw

   As soon as the file is in the directory, the card will work properly. No rebooting or changing run levels required.

   You should see this healthy report from the kernel when a program accesses the card (such as mythtv doing a channel scan with it):

   [42984.651309] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
   [42984.651324] cx8800 0000:01:08.0: firmware: requesting dvb-fe-cx24116.fw
   [42984.661140] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
   [42989.799701] cx24116_load_firmware: FW version 1.20.79.0
   [42989.799717] cx24116_firmware_ondemand: Firmware upload complete

   My channel scanning now works perfectly. Hope this helps someone else
** compare to mine:
  
   linuxmce@mythrouter:/lib/firmware$ md5sum dvb-fe-cx24116.fw
   dd8dfdfca6b72462d9db8032f78631c8  dvb-fe-cx24116.fw
** went to fetch Firmware v1.20.79.0
   linuxmce@mythrouter:/lib/firmware$ md5sum dvb-fe-cx24116.fw
   417cafd3b10e207e1dba9a03ad63e405  dvb-fe-cx24116.fw

During the previous couple of weeks I did a lot of test setup's in all kinds of ways. As stated earlier I have tried and tested both the standard v4l-dvb repositories at linuxtv.org as well as the s2-liplianin repository. At a certain point nothing would work any more.
I am not a specialist in mercurial or git, but I did some searching and went back to some of the test installs.
I found that hg parents gave me detailed info on the repository installed.

This was the hg parent info of a working install:
Code: [Select]
*** hg parents
    linuxmce@dcerouter:/usr/local/src/v4l-dvb$ hg parents
    Not trusting file /usr/local/src/v4l-dvb/.hg/hgrc from untrusted user root, group root
    Not trusting file /usr/local/src/v4l-dvb/.hg/hgrc from untrusted user root, group root
    changeset:   13486:b7aed635c722
    tag:         tip
    parent:      13476:94eeadb13b55
    parent:      13485:98ae95e7390b
    user:        Mauro Carvalho Chehab <mchehab@redhat.com>
    date:        Wed Nov 25 16:48:18 2009 -0200
    summary:     merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-misc

To put in place this specific set of the repo:
hg clone -r 13486 http://...

05-01-2010
Here's the additional sudo v4l2-ctl -n info:
Code: [Select]
linuxmce@dcerouter:~$ sudo v4l2-ctl -n
ioctl: VIDIOC_ENUMINPUT
Input   : 0
Name    : Television
Type    : 0x00000001
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0

Input   : 1
Name    : Composite1
Type    : 0x00000002
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0

Input   : 2
Name    : S-Video
Type    : 0x00000002
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0

If you require more info just let me know.
If you want me to do testing, let me know what steps I need to make, and I'll swap in a blank hd and test anew.

Thanks for your input!

Erwin




For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #121 on: May 23, 2010, 08:06:27 am »
NOW PNP

technisat cablestar hd2

Code: [Select]
02:0a.0 0480: 1822:4e35 (rev 01)
        Subsystem: 1ae4:0002
        Flags: bus master, medium devsel, latency 64, IRQ 22
        Memory at dfeff000 (32-bit, prefetchable) [size=4K]
        Kernel driver in use: Mantis
        Kernel modules: mantis
Mantis module compiled from http://mercurial.intuxication.org/hg/s2-liplianin (selectively compiled, hence there are a whole lot more drivers included).

Struggeling to make vdr actually use it now. I mean, it does open the device (listed in lsof and I get device is busy when trying to scan for channels while vdr is running) but it says "no signal" when switching to TV on my orbiter.
Any hints are welcome.
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #122 on: May 23, 2010, 08:08:26 am »
NOW PNP

Mandingo,

I have two older cards but thought I would give you the info anyway.

They are Winfast DTV-1000T PCI cards.

sudo lspci -vn
Code: [Select]
00:00.0 0600: 8086:1a30 (rev 11)
Subsystem: 8086:1a30
Flags: bus master, fast devsel, latency 0
Memory at f2000000 (32-bit, prefetchable) [size=32M]
Capabilities: [e4] Vendor Specific Information
Capabilities: [a0] AGP version 2.0

00:01.0 0604: 8086:1a31 (rev 11) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: f4900000-f69fffff
Prefetchable memory behind bridge: ec600000-f06fffff

00:1d.0 0c03: 8086:24c2 (rev 01) (prog-if 00 [UHCI])
Subsystem: 8086:5032
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at e800 [size=32]

00:1d.1 0c03: 8086:24c4 (rev 01) (prog-if 00 [UHCI])
Subsystem: 8086:5032
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at e880 [size=32]

00:1d.2 0c03: 8086:24c7 (rev 01) (prog-if 00 [UHCI])
Subsystem: 8086:5032
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ec00 [size=32]

00:1d.7 0c03: 8086:24cd (rev 01) (prog-if 20 [EHCI])
Subsystem: 8086:5032
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port

00:1e.0 0604: 8086:244e (rev 81) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6a00000-feafffff
Prefetchable memory behind bridge: f0700000-f07fffff

00:1f.0 0601: 8086:24c0 (rev 01)
Flags: bus master, medium devsel, latency 0

00:1f.1 0101: 8086:24cb (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: 8086:5032
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Memory at 50000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 0c05: 8086:24c3 (rev 01)
Subsystem: 8086:5032
Flags: medium devsel, IRQ 20
I/O ports at e000 [size=32]

00:1f.5 0401: 8086:24c5 (rev 01)
Subsystem: 8086:0102
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at e400 [size=256]
I/O ports at e080 [size=64]
Memory at febff800 (32-bit, non-prefetchable) [size=512]
Memory at febff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

01:00.0 0300: 10de:002d (rev 15) (prog-if 00 [VGA])
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Memory at ee000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at f69f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0

02:00.0 0780: 1057:5608
Subsystem: 1057:0000
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at d800 [size=256]
Memory at feaff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2

02:02.0 0400: 14f1:8800 (rev 05)
Subsystem: 107d:665f
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

02:02.2 0480: 14f1:8802 (rev 05)
Subsystem: 107d:665f
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2

02:0c.0 0200: 10ec:8169 (rev 10)
Subsystem: 1385:311a
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 20
I/O ports at d400 [size=256]
Memory at feafec00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f0700000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2

02:0d.0 0200: 1113:1211 (rev 10)
Subsystem: 1113:1211
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at d000 [size=256]
Memory at feafe800 (32-bit, non-prefetchable) [size=256]
Expansion ROM at f0720000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2

02:0e.0 0400: 14f1:8800 (rev 05)
Subsystem: 107d:665f
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2

02:0e.2 0480: 14f1:8802 (rev 05)
Subsystem: 107d:665f
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2

sudo v4l2-ctl -n
Code: [Select]
ioctl: VIDIOC_ENUMINPUT
Input   : 0
Name    : DVB
Type    : 0x00000002
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0

Input   : 1
Name    : Composite1
Type    : 0x00000002
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0

Input   : 2
Name    : S-Video
Type    : 0x00000002
Audioset: 0x00000000
Tuner   : 0x00000000
Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
Status  : 0
Both cards are the same so only included this for default /dev/video0

Drivers were standard part of 7.10 install and cards work very well with no issues whatsoever.
If firmware was required I did nothing explicit to get it.

Thanks for your efforts
Darren

« Last Edit: May 23, 2010, 08:10:27 am by MANDINGO »
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #123 on: May 23, 2010, 08:09:45 am »
NOW PNP

Hi I have a:

Hauppauge WinTV
Nova-t PCI (9003) Thomson DTT75105
PCI CX2388x
DVB-T (CX22702)
________________________________________________

sudo lspci -vn



01:07.0 0400: 14f1:8800 (rev 05)
        Subsystem: 0070:9002
        Flags: bus master, medium devsel, latency 64, IRQ 19
        Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data <?>
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: cx8800
        Kernel modules: cx8800

01:07.2 0480: 14f1:8802 (rev 05)
        Subsystem: 0070:9002
        Flags: bus master, medium devsel, latency 64, IRQ 19
        Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: cx88-mpeg driver manager
        Kernel modules: cx8802


________________________________________________

sudo v4l2-ctl -n

ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : DVB
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

________________________________________________


For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #124 on: May 23, 2010, 08:11:48 am »
NOW PNP

Jones is your card the Hauppauge Nova-T  ???

No, it is a 2 x Satelco EasyWatch PCI (DVB-C)
http://www.linuxtv.org/wiki/index.php/Satelco_EasyWatch_PCI_(DVB-C)


Keep up the good work :-)
Jones
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #125 on: May 23, 2010, 08:16:48 am »
NOW PNP

I got a hauppauge nova hd s2

here are my two cents:
lspci -vn:
Quote


v4l2-ctl -n
Quote
ioctl: VIDIOC_ENUMINPUT
   Input   : 0
   Name    : DVB
   Type    : 0x00000002
   Audioset: 0x00000000
   Tuner   : 0x00000000
   Standard: 0x00000000007F7FF7 ( PAL NTSC SECAM )
   Status  : 0
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #126 on: May 23, 2010, 08:17:57 am »
NOW PNP

Hi,

I use Technotrend-Budget/Hauppauge WinTV-NOVA-CI DVB card. Here is an output of lspci:

Code: [Select]
01:07.0 0480: 1131:7146 (rev 01)
        Subsystem: 13c2:100f
        Flags: bus master, medium devsel, latency 64, IRQ 19
        Memory at fcfff800 (32-bit, non-prefetchable) [size=512]

Code: [Select]
linuxmce@dcerouter:~$ sudo v4l2-ctl -n -d /dev/dvb/adapter0/frontend0
ioctl: VIDIOC_ENUMINPUT

For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #127 on: May 23, 2010, 08:19:10 am »
NOW PNP

Here are the details for my Hauppauge HVR-1300:

sudo lspci -vn

00:00.0 0600: 8086:2570 (rev 02)
        Subsystem: 8086:2570   
        Flags: bus master, fast devsel, latency 0
        Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [e4] Vendor Specific Information <?>   
        Kernel driver in use: agpgart-intel                 
        Kernel modules: intel-agp                           

00:02.0 0300: 8086:2572 (rev 02)
        Subsystem: 8086:485a   
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
        I/O ports at ec00                               
        Capabilities: [d0] Power Management version 1           
        Kernel modules: intelfb                                 

00:1d.0 0c03: 8086:24d2 (rev 02)
        Subsystem: 8086:485a   
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at c800 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.1 0c03: 8086:24d4 (rev 02)
        Subsystem: 8086:485a   
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at cc00 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.2 0c03: 8086:24d7 (rev 02)
        Subsystem: 8086:485a   
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at d000 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.3 0c03: 8086:24de (rev 02)
        Subsystem: 8086:485a   
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at d400 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.7 0c03: 8086:24dd (rev 02) (prog-if 20)
        Subsystem: 8086:485a                 
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2         
        Capabilities: [58] Debug port: BAR=1 offset=00a0       
        Kernel driver in use: ehci_hcd                         
        Kernel modules: ehci-hcd                               

00:1e.0 0604: 8086:244e (rev c2)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff                         
        Memory behind bridge: f8900000-fe9fffff                     
        Kernel modules: shpchp                                       

00:1f.0 0601: 8086:24d0 (rev 02)
        Flags: bus master, medium devsel, latency 0
        Kernel modules: intel-rng, iTCO_wdt       

00:1f.1 0101: 8086:24db (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: 8086:485a                                   
        Flags: bus master, medium devsel, latency 0, IRQ 18     
        I/O ports at 01f0                               
        I/O ports at 03f4                               
        I/O ports at 0170                               
        I/O ports at 0374                               
        I/O ports at ffa0 [size=16]                             
        Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
        Kernel driver in use: ata_piix                         
        Kernel modules: ata_piix                               

00:1f.2 0101: 8086:24d1 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 8086:485a                                             
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18       
        I/O ports at e800                                         
        I/O ports at e400                                         
        I/O ports at e000                                         
        I/O ports at dc00                                         
        I/O ports at d800 [size=16]                                       
        Kernel driver in use: ata_piix                                   
        Kernel modules: ata_piix                                         

00:1f.3 0c05: 8086:24d3 (rev 02)
        Subsystem: 8086:485a   
        Flags: medium devsel, IRQ 3
        I/O ports at c400 [size=32]
        Kernel modules: i2c-i801   

00:1f.5 0401: 8086:24d5 (rev 02)
        Subsystem: 8086:0210   
        Flags: bus master, medium devsel, latency 0, IRQ 17
        Memory at feb7f800 (32-bit, non-prefetchable) [size=512]
        Memory at feb7f400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2           
        Kernel driver in use: Intel ICH                         
        Kernel modules: snd-intel8x0                           

01:00.0 0400: 14f1:8800 (rev 05)
        Subsystem: 0070:9600   
        Flags: bus master, medium devsel, latency 32, IRQ 21
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data <?>               
        Capabilities: [4c] Power Management version 2           
        Kernel driver in use: cx8800                           
        Kernel modules: cx8800                                 

01:00.1 0480: 14f1:8811 (rev 05)
        Subsystem: 0070:9600
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
        Kernel modules: cx88-alsa

01:00.2 0480: 14f1:8802 (rev 05)
        Subsystem: 0070:9600
        Flags: bus master, medium devsel, latency 32, IRQ 21
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: cx88-mpeg driver manager
        Kernel modules: cx8802

01:02.0 0200: 10ec:8139 (rev 10)
        Subsystem: 3030:5032
        Flags: bus master, medium devsel, latency 32, IRQ 17
        I/O ports at b800 [size=256]
        Memory at fe9ffc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
        Kernel driver in use: 8139too
        Kernel modules: 8139cp, 8139too

01:08.0 0200: 8086:1050 (rev 01)
        Subsystem: 8086:304a
        Flags: bus master, medium devsel, latency 32, IRQ 20
        Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at bc00 [size=64]
        Capabilities: [dc] Power Management version 2
        Kernel driver in use: e100
        Kernel modules: e100, eepro100

sudo v4l2-ctl -n
ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : Television
        Type    : 0x00000001
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

        Input   : 1
        Name    : Composite1
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

        Input   : 2
        Name    : S-Video
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

Regards

Ste 
 
 

For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #128 on: May 23, 2010, 08:20:44 am »
NOW PNP

TechniSat SkyStar 2 TV rev.2.6D

lspci -vn

Code: [Select]
00:00.0 0500: 10de:03ea (rev a1)
        Subsystem: 1458:5001
        Flags: bus master, 66MHz, fast devsel, latency 0
        Capabilities: [44] HyperTransport: Slave or Primary Interface
        Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-

00:01.0 0601: 10de:03e0 (rev a2)
        Subsystem: 1458:0c11
        Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 0c05: 10de:03eb (rev a2)
        Subsystem: 1458:0c11
        Flags: 66MHz, fast devsel, IRQ 5
        I/O ports at c400 [size=64]
        I/O ports at 1c00 [size=64]
        I/O ports at 1c40 [size=64]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: nForce2_smbus
        Kernel modules: i2c-nforce2

00:01.2 0500: 10de:03f5 (rev a2)
        Subsystem: 1458:0c11
        Flags: 66MHz, fast devsel

00:02.0 0c03: 10de:03f1 (rev a3) (prog-if 10)
        Subsystem: 1458:5004
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at fd006000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd

00:02.1 0c03: 10de:03f2 (rev a3) (prog-if 20)
        Subsystem: 1458:5004
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at fd007000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=0098
        Capabilities: [80] Power Management version 2
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:04.0 0604: 10de:03f3 (rev a1) (prog-if 01)
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fb000000-fcffffff
        Prefetchable memory behind bridge: 88000000-880fffff
        Capabilities: [b8] Subsystem: 1458:026f
        Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-

00:05.0 0403: 10de:03f0 (rev a2)
        Subsystem: 1458:a002
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at fd000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
        Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:06.0 0101: 10de:03ec (rev a2) (prog-if 8a [Master SecP PriP])
        Subsystem: f458:5002
        Flags: bus master, 66MHz, fast devsel, latency 0
        [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        I/O ports at f000 [size=16]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: pata_amd
        Kernel modules: pata_amd

00:07.0 0680: 10de:03ef (rev a2)
        Subsystem: 1458:e000
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 222
        Memory at fd004000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at c800 [size=8]
        Capabilities: [44] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
        Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
        Kernel driver in use: forcedeth
        Kernel modules: forcedeth

00:08.0 0101: 10de:03f6 (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: 1458:b002
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        I/O ports at 09f0 [size=8]
        I/O ports at 0bf0 [size=4]
        I/O ports at 0970 [size=8]
        I/O ports at 0b70 [size=4]
        I/O ports at dc00 [size=16]
        Memory at fd005000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
        Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
        Kernel driver in use: sata_nv
        Kernel modules: sata_nv

00:09.0 0604: 10de:03e8 (rev a2)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: f8000000-faffffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
        Capabilities: [40] Subsystem: 10de:0000
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
        Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
        Capabilities: [80] Express Root Port (Slot+), MSI 00
        Capabilities: [100] Virtual Channel <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:18.0 0600: 1022:1200
        Flags: fast devsel
        Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 0600: 1022:1201
        Flags: fast devsel

00:18.2 0600: 1022:1202
        Flags: fast devsel

00:18.3 0600: 1022:1203
        Flags: fast devsel
        Capabilities: [f0] Secure device <?>

00:18.4 0600: 1022:1204
        Flags: fast devsel

01:07.0 0280: 13d0:2103 (rev 02)
        Subsystem: 13d0:2103
        Flags: bus master, slow devsel, latency 32, IRQ 17
        Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
        I/O ports at a000 [size=32]
        Kernel driver in use: b2c2_flexcop_pci
        Kernel modules: b2c2-flexcop-pci

01:09.0 0200: 10ec:8139 (rev 10)
        Subsystem: 10ec:8139
        Flags: bus master, medium devsel, latency 64, IRQ 19
        I/O ports at a400 [size=256]
        Memory at fc010000 (32-bit, non-prefetchable) [size=256]
        [virtual] Expansion ROM at 88000000 [disabled] [size=64K]
        Capabilities: [50] Power Management version 2
        Kernel driver in use: 8139too
        Kernel modules: 8139cp, 8139too

02:00.0 0300: 10de:0392 (rev a1)
        Subsystem: 1458:341a
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
        I/O ports at b000 [size=128]
        [virtual] Expansion ROM at fa000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [128] Power Budgeting <?>
        Kernel driver in use: nvidia
        Kernel modules: nvidiafb, nvidia

sudo apt-get install ivtv-utils

sudo v4l2-ctl -n

Code: [Select]
Failed to open /dev/video0: No such file or directory
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #129 on: May 23, 2010, 08:37:04 am »
NOW PNP

Not sure why it took me so long to read this post! Sorry!  :-[

Avermedia AVerTV DVB-T 777
Code: [Select]
linuxmce@dcerouter:~$ sudo lspci -vn
[sudo] password for linuxmce:
00:00.0 0600: 8086:29c0 (rev 02)
        Subsystem: 1043:8276
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:01.0 0604: 8086:29c1 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: fc000000-fe8fffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: [88] Subsystem: 1043:8276
        Capabilities: [80] Power Management version 3
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0           Enable-
        Capabilities: [a0] Express Root Port (Slot+) IRQ 0

00:1a.0 0c03: 8086:2937 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1043:8277
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at b800 [size=32]
        Capabilities: [50] Vendor Specific Information

00:1a.1 0c03: 8086:2938 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1043:8277
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at b880 [size=32]
        Capabilities: [50] Vendor Specific Information

00:1a.2 0c03: 8086:2939 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1043:8277
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at bc00 [size=32]
        Capabilities: [50] Vendor Specific Information

00:1a.7 0c03: 8086:293c (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1043:8277
        Flags: bus master, medium devsel, latency 0, IRQ 19
        Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port
        Capabilities: [98] Vendor Specific Information

00:1b.0 0403: 8086:293e (rev 02)
        Subsystem: 1043:829f
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0           Enable-
        Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 0604: 8086:2940 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0           Enable-
        Capabilities: [90] Subsystem: 1043:8277
        Capabilities: [a0] Power Management version 2

00:1c.4 0604: 8086:2948 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fea00000-feafffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0           Enable-
        Capabilities: [90] Subsystem: 1043:8277
        Capabilities: [a0] Power Management version 2

00:1c.5 0604: 8086:294a (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fe900000-fe9fffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0           Enable-
        Capabilities: [90] Subsystem: 1043:8277
        Capabilities: [a0] Power Management version 2

00:1d.0 0c03: 8086:2934 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1043:8277
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at b080 [size=32]
        Capabilities: [50] Vendor Specific Information

00:1d.1 0c03: 8086:2935 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1043:8277
        Flags: bus master, medium devsel, latency 0, IRQ 21
        I/O ports at b400 [size=32]
        Capabilities: [50] Vendor Specific Information

00:1d.2 0c03: 8086:2936 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1043:8277
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at b480 [size=32]
        Capabilities: [50] Vendor Specific Information

00:1d.7 0c03: 8086:293a (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1043:8277
        Flags: bus master, medium devsel, latency 0, IRQ 20
        Memory at fbfff800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port
        Capabilities: [98] Vendor Specific Information

00:1e.0 0604: 8086:244e (rev 92) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: feb00000-febfffff
        Capabilities: [50] Subsystem: 1043:8277

00:1f.0 0601: 8086:2916 (rev 02)
        Subsystem: 1043:8277
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:1f.2 0101: 8086:2920 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 1043:8277
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 22
        I/O ports at a000 [size=8]
        I/O ports at 9c00 [size=4]
        I/O ports at 9880 [size=8]
        I/O ports at 9800 [size=4]
        I/O ports at 9480 [size=16]
        I/O ports at 9400 [size=16]
        Capabilities: [70] Power Management version 3
        Capabilities: [b0] Vendor Specific Information

00:1f.3 0c05: 8086:2930 (rev 02)
        Subsystem: 1043:8277
        Flags: medium devsel, IRQ 5
        Memory at fbfff400 (64-bit, non-prefetchable) [size=256]
        I/O ports at 0400 [size=32]

00:1f.5 0101: 8086:2926 (rev 02) (prog-if 85 [Master SecO PriO])
        Subsystem: 1043:8277
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 22
        I/O ports at b000 [size=8]
        I/O ports at ac00 [size=4]
        I/O ports at a880 [size=8]
        I/O ports at a800 [size=4]
        I/O ports at a480 [size=16]
        I/O ports at a400 [size=16]
        Capabilities: [70] Power Management version 3
        Capabilities: [b0] Vendor Specific Information

01:00.0 0300: 10de:01df (rev a1) (prog-if 00 [VGA])
        Subsystem: 1458:342a
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at fe8e0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0           Enable-
        Capabilities: [78] Express Endpoint IRQ 0

02:00.0 0200: 11ab:4364 (rev 12)
        Subsystem: 1043:81f8
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
        I/O ports at c800 [size=256]
        Expansion ROM at fe9c0000 [disabled] [size=128K]
        Capabilities: [48] Power Management version 3
        Capabilities: [50] Vital Product Data
        Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0           Enable-
        Capabilities: [e0] Express Legacy Endpoint IRQ 0

03:00.0 0101: 11ab:6101 (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 1043:82e0
        Flags: bus master, fast devsel, latency 0, IRQ 16
        I/O ports at dc00 [size=8]
        I/O ports at d880 [size=4]
        I/O ports at d800 [size=8]
        I/O ports at d480 [size=4]
        I/O ports at d400 [size=16]
        Memory at feaffc00 (32-bit, non-prefetchable) [size=512]
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0           Enable-
        Capabilities: [e0] Express Legacy Endpoint IRQ 0

05:01.0 0480: 1131:7133 (rev d1)
        Subsystem: 1461:2c05
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at febff800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2

05:02.0 0200: 10ec:8139 (rev 10)
        Subsystem: 10ec:8139
        Flags: bus master, medium devsel, latency 64, IRQ 19
        I/O ports at e800 [size=256]
        Memory at febff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2

05:03.0 0c00: 1106:3044 (rev c0) (prog-if 10 [OHCI])
        Subsystem: 1043:81fe
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at febfe800 (32-bit, non-prefetchable) [size=2K]
        I/O ports at ec00 [size=128]
        Capabilities: [50] Power Management version 2



Thanks!
WR.

For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #130 on: May 23, 2010, 09:03:00 am »
NOW PNP

Card info from my friend:
 - Prof Revolution DVB-S2 7500 USB - http://www.prof-tuners.com/eng/prof7500.html
 - lsusb:
Code: [Select]
Bus 002 Device 003: ID 3034:7500 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x3034
  idProduct          0x7500
  bcdDevice            0.00
  iManufacturer           1 Prof Group
  iProduct                2 DVB-S USB
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #131 on: May 23, 2010, 09:24:45 am »
NOW PNP

I have WinTV-Nexus-S V2.3 PCI
 
sudo lspci -vn

Code: [Select]

00:00.0 0600: 8086:2990 (rev 02)
        Subsystem: 1028:01da     
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: intel-agp                         

00:01.0 0604: 8086:2991 (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff                       
        Memory behind bridge: fc000000-feafffff                     
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: [88] Subsystem: 1028:01da                             
        Capabilities: [80] Power Management version 3                       
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [a0] Express Root Port (Slot+), MSI 00                           
        Capabilities: [100] Virtual Channel <?>                                       
        Capabilities: [140] Root Complex Link <?>                                     
        Kernel driver in use: pcieport-driver                                         
        Kernel modules: shpchp                                                         

00:1a.0 0c03: 8086:2834 (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at ff20 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1a.1 0c03: 8086:2835 (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at ff00 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20)
        Subsystem: 1028:01da                 
        Flags: bus master, medium devsel, latency 0, IRQ 22
        Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2         
        Capabilities: [58] Debug port: BAR=1 offset=00a0       
        Kernel driver in use: ehci_hcd                         
        Kernel modules: ehci-hcd                               

00:1b.0 0403: 8086:284b (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2           
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00           
        Capabilities: [100] Virtual Channel <?>                                       
        Capabilities: [130] Root Complex Link <?>                                     
        Kernel driver in use: HDA Intel                                               
        Kernel modules: snd-hda-intel                                                 

00:1c.0 0604: 8086:283f (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: fbf00000-fbffffff                     
        Capabilities: [40] Express Root Port (Slot+), MSI 00       
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [90] Subsystem: 1028:01da                                       
        Capabilities: [a0] Power Management version 2                                 
        Capabilities: [100] Virtual Channel <?>                                       
        Capabilities: [180] Root Complex Link <?>                                     
        Kernel driver in use: pcieport-driver                                         
        Kernel modules: shpchp                                                         

00:1c.4 0604: 8086:2847 (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: fbe00000-fbefffff                     
        Capabilities: [40] Express Root Port (Slot+), MSI 00       
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [90] Subsystem: 1028:01da                                       
        Capabilities: [a0] Power Management version 2                                 
        Capabilities: [100] Virtual Channel <?>                                       
        Capabilities: [180] Root Complex Link <?>                                     
        Kernel driver in use: pcieport-driver                                         
        Kernel modules: shpchp                                                         

00:1d.0 0c03: 8086:2830 (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, medium devsel, latency 0, IRQ 23
        I/O ports at ff80 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.1 0c03: 8086:2831 (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at ff60 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.2 0c03: 8086:2832 (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at ff40 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.7 0c03: 8086:2836 (rev 02) (prog-if 20)
        Subsystem: 1028:01da                 
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2         
        Capabilities: [58] Debug port: BAR=1 offset=00a0       
        Kernel driver in use: ehci_hcd                         
        Kernel modules: ehci-hcd                               

00:1e.0 0604: 8086:244e (rev f2) (prog-if 01)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        I/O behind bridge: 0000c000-0000cfff                         
        Memory behind bridge: fbc00000-fbdfffff                     
        Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
        Capabilities: [50] Subsystem: 1028:01da                             

00:1f.0 0601: 8086:2810 (rev 02)
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: iTCO_wdt                         

00:1f.2 0101: 8086:2820 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 1028:01da                                             
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20       
        I/O ports at fe00 [size=8]                                       
        I/O ports at fe10 [size=4]                                       
        I/O ports at fe20 [size=8]                                       
        I/O ports at fe30 [size=4]                                       
        I/O ports at fec0 [size=16]                                       
        I/O ports at ecc0 [size=16]                                       
        Capabilities: [70] Power Management version 3                     
        Kernel driver in use: ata_piix                                   
        Kernel modules: ata_piix                                         

00:1f.3 0c05: 8086:283e (rev 02)
        Subsystem: 1028:01da   
        Flags: medium devsel, IRQ 10
        Memory at febfbb00 (32-bit, non-prefetchable) [size=256]
        I/O ports at ece0 [size=32]                             
        Kernel modules: i2c-i801                               

00:1f.5 0101: 8086:2825 (rev 02) (prog-if 85 [Master SecO PriO])
        Subsystem: 1028:01da                                   
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
        I/O ports at fe40 [size=8]                               
        I/O ports at fe50 [size=4]                               
        I/O ports at fe60 [size=8]                               
        I/O ports at fe70 [size=4]                               
        I/O ports at fed0 [size=16]                               
        I/O ports at ecd0 [size=16]                               
        Capabilities: [70] Power Management version 3             
        Kernel driver in use: ata_piix                           
        Kernel modules: ata_piix                                 

01:00.0 0300: 10de:0391 (rev a1)
        Subsystem: 3842:c554   
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]   
        Memory at fd000000 (64-bit, non-prefetchable) [size=16M]
        I/O ports at dc80 [size=128]                           
        Expansion ROM at fea00000 [disabled] [size=128K]       
        Capabilities: [60] Power Management version 2           
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [78] Express Endpoint, MSI 00                                   
        Capabilities: [100] Virtual Channel <?>                                       
        Capabilities: [128] Power Budgeting <?>                                       
        Kernel driver in use: nvidia                                                   
        Kernel modules: nvidiafb, nvidia                                               

03:00.0 0200: 14e4:167a (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, fast devsel, latency 0, IRQ 220
        Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
        Expansion ROM at <ignored> [disabled]                   
        Capabilities: [48] Power Management version 3
        Capabilities: [50] Vital Product Data <?>
        Capabilities: [58] Vendor Specific Information <?>
        Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
        Capabilities: [d0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [13c] Virtual Channel <?>
        Capabilities: [160] Device Serial Number 48-21-30-fe-ff-b9-19-00
        Capabilities: [16c] Power Budgeting <?>
        Kernel driver in use: tg3
        Kernel modules: tg3

04:00.0 0480: 1131:7146 (rev 01)
        Subsystem: 13c2:000e
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at fbcbfe00 (32-bit, non-prefetchable) [size=512]
        Kernel driver in use: dvb
        Kernel modules: dvb-ttpci

04:02.0 0200: 8086:107c (rev 05)
        Subsystem: 8086:1376
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
        Memory at fbcc0000 (32-bit, non-prefetchable) [size=128K]
        Memory at fbce0000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at ccc0 [size=64]
        Expansion ROM at 88000000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
        Capabilities: [e4] PCI-X non-bridge device
        Kernel driver in use: e1000
        Kernel modules: e1000



sudo v4l2-ctl -n

Code: [Select]

ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : DVB
        Type    : 0x00000002
        Audioset: 0x00000001
        Tuner   : 0x00000000
        Standard: 0x0000000000001007 ( PAL NTSC )
        Status  : 0

For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #132 on: May 23, 2010, 09:40:01 am »
NOW PNP

Hi,

i have a Tevvi S660 DVB-S2 USB, it works with the "linux pack" from http://tevii.com/linux_tevii_ds3000.rar
You must copy the FW from Tevvi to /lib/firmware and then you install the v4l from the packet (ReadMe included)
make && make install and the box work with the vdr.  (thanks to nite_man !)

_________________________________________________________________________________________________
lsusb -v

Bus 003 Device 002: ID 9022:d660 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x9022
  idProduct          0xd660
  bcdDevice            0.00
  iManufacturer           1 TBS-Tech
  iProduct                2 DVBS2BOX
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)
_______________________________________________________________________________________

dmesg | grep dvb

[   25.850980] dvb-usb: found a 'TEVII S660 DVBS2 USB2.0' in cold state, will try to load a firmware
[   25.850994] firmware: requesting dvb-usb-teviis660.fw
[   27.325924] dvb-usb: downloading firmware from file 'dvb-usb-teviis660.fw'
[   27.325937] firmware: requesting dvb-usb-teviis660.fw
[   27.636059] dvb-usb: found a 'TEVII S660 DVBS2 USB2.0' in warm state.
[   27.636215] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   27.765778] dvb-usb: MAC address: f76388f0
[   28.384342] dvb-usb: schedule remote query interval to 150 msecs.
[   28.384357] dvb-usb: TEVII S660 DVBS2 USB2.0 successfully initialized and connected.

________________________________________________________________________________________________

v4l2-ctl -n -d /dev/dvb/adapter0/frontend0

The program 'v4l2-ctl' is currently not installed.  You can install it by typing:
sudo apt-get install ivtv-utils
__________________________________________________________________________________________________


Marco
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #133 on: May 23, 2010, 07:22:05 pm »
NOW PNP

Yo Mandingo. On your request =)

keep the pnp commin....

Technotrend
TT-connect S2-3650 CI

sudo v4l2-ctl -n:
Code: [Select]
ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : STV06xx
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000000000 ( )
        Status  : 0

sudo lsusb -v
Code: [Select]
Bus 004 Device 007: ID 0b48:300a TechnoTrend AG
Device Descriptor:                             
  bLength                18                     
  bDescriptorType         1                     
  bcdUSB               2.00                     
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0                             
  bDeviceProtocol         0                             
  bMaxPacketSize0        64                             
  idVendor           0x0b48 TechnoTrend AG             
  idProduct          0x300a                             
  bcdDevice            1.01                             
  iManufacturer           1 TechnoTrend                 
  iProduct                2 TT-USB2.0                   
  iSerial                 3 LHIEKI                     
  bNumConfigurations      1   
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

gunsmoke

  • Veteran
  • ***
  • Posts: 73
    • View Profile
Re: DVB Cards info needed for Templates
« Reply #134 on: May 23, 2010, 10:25:29 pm »
Testet my new Hauppauge WinTV-HVR-4000-HD Model 364, PCI, AnalogTV-Radio/DVB-T-S-S2/Line In/IR remote control sensor input. Test platform LinuxMCE 8.10 beta 2 SVN 22969. HW; Mobo: Gigabyte E7AUM-DS2H, Core2 Duo E8400.

sudo lspci -vn give me:
Code: [Select]
00:00.0 0600: 10de:0a80 (rev b1)
        Flags: bus master, 66MHz, fast devsel, latency 0

00:00.1 0500: 10de:0a88 (rev b1)
        Flags: bus master, 66MHz, fast devsel, latency 0

00:03.0 0601: 10de:0aac (rev b2)
        Subsystem: 1458:5001    
        Flags: bus master, 66MHz, fast devsel, latency 0

00:03.1 0500: 10de:0aa4 (rev b1)
        Flags: 66MHz, fast devsel

00:03.2 0c05: 10de:0aa2 (rev b1)
        Subsystem: 1458:0aa2    
        Flags: 66MHz, fast devsel, IRQ 255
        I/O ports at c000 [size=64]      
        I/O ports at 1c00 [size=64]      
        I/O ports at 1c80 [size=64]      
        Capabilities: [44] Power Management version 2

00:03.3 0500: 10de:0a89 (rev b1)
        Flags: 66MHz, fast devsel

00:03.4 0500: 10de:0a98 (rev b1)
        Subsystem: 10de:cb79    
        Flags: 66MHz, fast devsel

00:03.5 0b40: 10de:0aa3 (rev b1)
        Subsystem: 10de:cb79    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at ea000000 (32-bit, non-prefetchable) [size=512K]
        Kernel driver in use: nvidia                            
        Kernel modules: nvidia                                  

00:04.0 0c03: 10de:0aa5 (rev b1) (prog-if 10)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
        Memory at ea08b000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: ohci_hcd                          
        Kernel modules: ohci-hcd                                

00:04.1 0c03: 10de:0aa6 (rev b1) (prog-if 20)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
        Memory at ea08c000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=00a0        
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:06.0 0c03: 10de:0aa7 (rev b1) (prog-if 10)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
        Memory at ea089000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: ohci_hcd                          
        Kernel modules: ohci-hcd                                

00:06.1 0c03: 10de:0aa9 (rev b1) (prog-if 20)
        Subsystem: 1458:5004                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at ea08a000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=00a0        
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

00:08.0 0403: 10de:0ac0 (rev b1)
        Subsystem: 1458:a102    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
        Memory at ea080000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2          
        Kernel driver in use: HDA Intel                        
        Kernel modules: snd-hda-intel                          

00:09.0 0604: 10de:0aab (rev b1) (prog-if 01)
        Flags: bus master, 66MHz, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00008000-00008fff                        
        Memory behind bridge: e4000000-e8ffffff                      
        Capabilities: [b8] Subsystem: 1458:026f                      

00:0a.0 0200: 10de:0ab0 (rev b1)
        Subsystem: 1458:e000    
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 221
        Memory at ea086000 (32-bit, non-prefetchable) [size=4K]  
        I/O ports at c400 [size=8]                              
        Memory at ea087000 (32-bit, non-prefetchable) [size=256]
        Memory at ea088000 (32-bit, non-prefetchable) [size=16]  
        Capabilities: [44] Power Management version 2            
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/4 Enable+                                                                        
        Kernel driver in use: forcedeth                                        
        Kernel modules: forcedeth                                              

00:0b.0 0106: 10de:0ab8 (rev b1) (prog-if 01)
        Subsystem: 1458:b002                
        Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 222
        I/O ports at 09f0 [size=8]                              
        I/O ports at 0bf0 [size=4]                              
        I/O ports at 0970 [size=8]                              
        I/O ports at 0b70 [size=4]                              
        I/O ports at d800 [size=16]                              
        Memory at ea084000 (32-bit, non-prefetchable) [size=8K]  
        Capabilities: [44] Power Management version 2            
        Capabilities: [8c] SATA HBA <?>                          
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+                                                                        
        Kernel driver in use: ahci                                              
        Kernel modules: ahci                                                    

00:10.0 0604: 10de:0aa0 (rev b1)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00009000-00009fff                        
        Memory behind bridge: e2000000-e3ffffff                    
        Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
        Capabilities: [40] Subsystem: 10de:0000                            
        Capabilities: [48] Power Management version 2                      
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-                                                                        
        Kernel modules: shpchp                                                  

00:16.0 0604: 10de:0ac7 (rev b1)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000a000-0000bfff                        
        Memory behind bridge: e9000000-e9ffffff                    
        Capabilities: [40] Subsystem: 10de:0000                    
        Capabilities: [48] Power Management version 3              
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+                                                                        
        Capabilities: [80] Express Root Port (Slot+), MSI 00                    
        Kernel driver in use: pcieport-driver                                  
        Kernel modules: shpchp                                                  

01:05.0 0400: 14f1:8800 (rev 05)
        Subsystem: 0070:6902    
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data <?>              
        Capabilities: [4c] Power Management version 2          
        Kernel driver in use: cx8800                            
        Kernel modules: cx8800                                  

01:05.1 0480: 14f1:8801 (rev 05)
        Subsystem: 0070:6902    
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at e5000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2          
        Kernel modules: cx88-alsa                              

01:05.2 0480: 14f1:8802 (rev 05)
        Subsystem: 0070:6902    
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2          
        Kernel driver in use: cx88-mpeg driver manager          
        Kernel modules: cx8802                                  

01:05.4 0480: 14f1:8804 (rev 05)
        Subsystem: 0070:6902    
        Flags: bus master, medium devsel, latency 32, IRQ 11
        Memory at e7000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2          

01:06.0 0c03: 1106:3038 (rev 61)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 17
        I/O ports at 8000 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:06.1 0c03: 1106:3038 (rev 61)
        Subsystem: 1106:3038    
        Flags: bus master, medium devsel, latency 32, IRQ 18
        I/O ports at 8400 [size=32]                        
        Capabilities: [80] Power Management version 2      
        Kernel driver in use: uhci_hcd                      
        Kernel modules: uhci-hcd                            

01:06.2 0c03: 1106:3104 (rev 63) (prog-if 20)
        Subsystem: 1106:3104                
        Flags: bus master, medium devsel, latency 32, IRQ 19
        Memory at e8000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2          
        Kernel driver in use: ehci_hcd                          
        Kernel modules: ehci-hcd                                

02:00.0 0300: 10de:086a (rev b1)
        Subsystem: 1458:d000    
        Flags: bus master, fast devsel, latency 0, IRQ 20
        Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
        Memory at c0000000 (64-bit, prefetchable) [size=256M]  
        Memory at d0000000 (64-bit, prefetchable) [size=32M]    
        I/O ports at 9000 [size=128]                            
        [virtual] Expansion ROM at d2000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2            
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-                                                                        
        Kernel driver in use: nvidia                                            
        Kernel modules: nvidiafb, nvidia                                        

03:00.0 0101: 197b:2368 (prog-if 85 [Master SecO PriO])
        Subsystem: 1458:b000                          
        Flags: bus master, fast devsel, latency 0, IRQ 16
        I/O ports at a000 [size=8]                      
        I/O ports at a400 [size=4]                      
        I/O ports at a800 [size=8]                      
        I/O ports at ac00 [size=4]                      
        I/O ports at b000 [size=16]                      
        Capabilities: [68] Power Management version 2    
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: pata_jmicron                
        Kernel modules: pata_jmicron

sudo v4l2-ctl -n, gives me:
Code: [Select]
ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : Television
        Type    : 0x00000001
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x00000000007F7FF7 ( PAL NTSC SECAM )
        Status  : 0

        Input   : 1
        Name    : Composite1
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x00000000007F7FF7 ( PAL NTSC SECAM )
        Status  : 0

        Input   : 2
        Name    : S-Video
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x00000000007F7FF7 ( PAL NTSC SECAM )
        Status  : 0


LinuxMCE find my card PnP. Have not been able to scan for channels yet, due to the wiki guide here http://wiki.linuxmce.org/index.php/VDR for the VDR was not sucsessfull for DVB-T :(

Could not find a local transmitter for Norway Stavanger. I see in the scan examples that sweden, denmark, findland, uk, germany, australia, france etc is present, but none from Norway :(

Can I make my own list, if so, is there a How-to?
« Last Edit: May 24, 2010, 02:37:53 pm by gunsmoke »
HTPC HARDWARE: Gigabyte E7AUM-DS2H, Onboard video 9400, mATX, Socket LGA775. Intel Core2 Duo E8400. Samsung SpinPoint SATA2 HD 1000GB. Corsair 2x2GB DDR2. NEC DVD+/-RW ND4551A. Seasonic S12-330; +3.3v/20A. BIOS: v3.7