DVB Cards info needed for Templates

[maverick0815]

I got a hauppauge nova hd s2

here are my two cents:
lspci -vn:

v4l2-ctl -n

ioctl: VIDIOC_ENUMINPUT
   Input   : 0
   Name    : DVB
   Type    : 0x00000002
   Audioset: 0x00000000
   Tuner   : 0x00000000
   Standard: 0x00000000007F7FF7 ( PAL NTSC SECAM )
   Status  : 0

[MANDINGO]

 

Current Cards that are now in the system are !!!

WinTV-PVR-150
WinTV-PVR-250
WinTV-PVR-500
WinTV-PVR-USB2
HD PVR
WinTV-HVR-850
WinTV-HVR-950Q
WinTV-HVR-1100
WinTV-HVR-1150
WinTV-HVR-1200
WinTV-HVR-1250
WinTV-HVR-1300
WinTV-HVR-1500
WinTV-HVR-1600
WinTV-HVR-1850
WinTV-HVR-1950
WinTV-HVR-2250
WinTV-HVR-3000
WinTV-HVR-4000
WinTV-NOVA-T
WinTV-NOVA-T-500
WinTV-NOVA-S-Plus
WinTV-NOVA-HD-S2
TV-Wonder VE
S2-3200
HD-5500
DTV-1000T
Cinergy DT USB XS Diversity
Cablestar HD 2
 

I will be adding more later today but i need those mentioned tested and i still need alot of vendor id's so please keep the card info comming
as mention before there will be a deb supplied with the templates when complete that will handle the driver issue for some of the cards. 
There will be a final change on the cards once a bug has been fixed for the mythtv plugin...

Mandingo

[patmankn]

Mandigo,

sorry that i have to admit.... but you just rock! ;O)

As soon as i plugged in my cinerygy USB stick the Systems pops up and asks me what to do.
BUT... the systems offers two choices to install, but tells me "sorry, cannot find any provider for your country. You need to run MythTV Setup" (sth. like that).

Pat

[MANDINGO]

Mandigo,

sorry that i have to admit.... but you just rock! ;O)

As soon as i plugged in my cinerygy USB stick the Systems pops up and asks me what to do.
BUT... the systems offers two choices to install, but tells me "sorry, cannot find any provider for your country. You need to run MythTV Setup" (sth. like that).

Pat

Pat have you done a dist-upgrade if not do this from the term
sudo apt-get update
then
sudo apt-get dist-upgrade

there has been some fixes to allow for a dummie provider if you dont have one and set it to LMCEdefault within myth, if this doesnt happen for you let me know and ill look into it a little deeper
Thanks and keep testing

Mandingo

[nite_man]

Hi,

I use Technotrend-Budget/Hauppauge WinTV-NOVA-CI DVB card. Here is an output of lspci:

Code:

01:07.0 0480: 1131:7146 (rev 01)
        Subsystem: 13c2:100f
        Flags: bus master, medium devsel, latency 64, IRQ 19
        Memory at fcfff800 (32-bit, non-prefetchable) [size=512]

Code:

linuxmce@dcerouter:~$ sudo v4l2-ctl -n -d /dev/dvb/adapter0/frontend0
ioctl: VIDIOC_ENUMINPUT

[patmankn]

Mandigo,

ok... in the MythTV Setup i saw sth. with LMCE Default... but i didn't know what to do with it ;O)
So i need to take a look at that as well.
But first, i need to fix my MythTV-cannot-scan-DVBC-with-UNityMedia-as-theprovider issue ;O(

pat

[MANDINGO]

Hi,

I use Technotrend-Budget/Hauppauge WinTV-NOVA-CI DVB card. Here is an output of lspci:

Code:

01:07.0 0480: 1131:7146 (rev 01)
        Subsystem: 13c2:100f
        Flags: bus master, medium devsel, latency 64, IRQ 19
        Memory at fcfff800 (32-bit, non-prefetchable) [size=512]

Code:

linuxmce@dcerouter:~$ sudo v4l2-ctl -n -d /dev/dvb/adapter0/frontend0
ioctl: VIDIOC_ENUMINPUT

Nite_Man what is the exact TechnoTrend card model for the dvb card, what are the stickers on the card ?

[MANDINGO]

Mandigo,

ok... in the MythTV Setup i saw sth. with LinuxMCE Default... but i didn't know what to do with it ;O)
So i need to take a look at that as well.
But first, i need to fix my MythTV-cannot-scan-DVBC-with-UNityMedia-as-theprovider issue ;O(

pat

patmankn go into myth setup and create a new input source for your service provider which is UNityMedia, create it based on your card and then scan for channels, that should fix you up

Mandingo

[MANDINGO]

 

Latest DVB cards now added to the system but still need testing and a couple need vendor id # so please keep posting your card info

Thanks

TT-connect S-2400
TT-connect S2-3600
TT-connect S2-3650 CI
TT-connect CT-3650 CI
TT-premium C-2300
TT-premium S-2300
TT-budget S-1401
TT-budget S-1500
TT-budget T-1500
TT-budget C-1501
TT-budget S2-1600
TT-budget T-3000

Mandingo

[ste_b_79]

Here are the details for my Hauppauge HVR-1300:

sudo lspci -vn

00:00.0 0600: 8086:2570 (rev 02)
        Subsystem: 8086:2570   
        Flags: bus master, fast devsel, latency 0
        Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [e4] Vendor Specific Information <?>   
        Kernel driver in use: agpgart-intel                 
        Kernel modules: intel-agp                           

00:02.0 0300: 8086:2572 (rev 02)
        Subsystem: 8086:485a   
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
        I/O ports at ec00                               
        Capabilities: [d0] Power Management version 1           
        Kernel modules: intelfb                                 

00:1d.0 0c03: 8086:24d2 (rev 02)
        Subsystem: 8086:485a   
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at c800 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.1 0c03: 8086:24d4 (rev 02)
        Subsystem: 8086:485a   
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at cc00 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.2 0c03: 8086:24d7 (rev 02)
        Subsystem: 8086:485a   
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at d000 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.3 0c03: 8086:24de (rev 02)
        Subsystem: 8086:485a   
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at d400 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.7 0c03: 8086:24dd (rev 02) (prog-if 20)
        Subsystem: 8086:485a                 
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2         
        Capabilities: [58] Debug port: BAR=1 offset=00a0       
        Kernel driver in use: ehci_hcd                         
        Kernel modules: ehci-hcd                               

00:1e.0 0604: 8086:244e (rev c2)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff                         
        Memory behind bridge: f8900000-fe9fffff                     
        Kernel modules: shpchp                                       

00:1f.0 0601: 8086:24d0 (rev 02)
        Flags: bus master, medium devsel, latency 0
        Kernel modules: intel-rng, iTCO_wdt       

00:1f.1 0101: 8086:24db (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: 8086:485a                                   
        Flags: bus master, medium devsel, latency 0, IRQ 18     
        I/O ports at 01f0                               
        I/O ports at 03f4                               
        I/O ports at 0170                               
        I/O ports at 0374                               
        I/O ports at ffa0 [size=16]                             
        Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
        Kernel driver in use: ata_piix                         
        Kernel modules: ata_piix                               

00:1f.2 0101: 8086:24d1 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 8086:485a                                             
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18       
        I/O ports at e800                                         
        I/O ports at e400                                         
        I/O ports at e000                                         
        I/O ports at dc00                                         
        I/O ports at d800 [size=16]                                       
        Kernel driver in use: ata_piix                                   
        Kernel modules: ata_piix                                         

00:1f.3 0c05: 8086:24d3 (rev 02)
        Subsystem: 8086:485a   
        Flags: medium devsel, IRQ 3
        I/O ports at c400 [size=32]
        Kernel modules: i2c-i801   

00:1f.5 0401: 8086:24d5 (rev 02)
        Subsystem: 8086:0210   
        Flags: bus master, medium devsel, latency 0, IRQ 17
        Memory at feb7f800 (32-bit, non-prefetchable) [size=512]
        Memory at feb7f400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2           
        Kernel driver in use: Intel ICH                         
        Kernel modules: snd-intel8x0                           

01:00.0 0400: 14f1:8800 (rev 05)
        Subsystem: 0070:9600   
        Flags: bus master, medium devsel, latency 32, IRQ 21
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data <?>               
        Capabilities: [4c] Power Management version 2           
        Kernel driver in use: cx8800                           
        Kernel modules: cx8800                                 

01:00.1 0480: 14f1:8811 (rev 05)
        Subsystem: 0070:9600
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
        Kernel modules: cx88-alsa

01:00.2 0480: 14f1:8802 (rev 05)
        Subsystem: 0070:9600
        Flags: bus master, medium devsel, latency 32, IRQ 21
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
        Kernel driver in use: cx88-mpeg driver manager
        Kernel modules: cx8802

01:02.0 0200: 10ec:8139 (rev 10)
        Subsystem: 3030:5032
        Flags: bus master, medium devsel, latency 32, IRQ 17
        I/O ports at b800 [size=256]
        Memory at fe9ffc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
        Kernel driver in use: 8139too
        Kernel modules: 8139cp, 8139too

01:08.0 0200: 8086:1050 (rev 01)
        Subsystem: 8086:304a
        Flags: bus master, medium devsel, latency 32, IRQ 20
        Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at bc00 [size=64]
        Capabilities: [dc] Power Management version 2
        Kernel driver in use: e100
        Kernel modules: e100, eepro100

sudo v4l2-ctl -n
ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : Television
        Type    : 0x00000001
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

        Input   : 1
        Name    : Composite1
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

        Input   : 2
        Name    : S-Video
        Type    : 0x00000002
        Audioset: 0x00000000
        Tuner   : 0x00000000
        Standard: 0x0000000000727FF7 ( PAL NTSC SECAM )
        Status  : 0

Regards

Ste 
 
 

[nite_man]

Nite_Man what is the exact TechnoTrend card model for the dvb card, what are the stickers on the card ?

Cannot find any model. The photo of the card is here.

[MANDINGO]

Nite_Man what is the exact TechnoTrend card model for the dvb card, what are the stickers on the card ?

Cannot find any model. The photo of the card is here.

Nite Man thats good enough

Thanks

Mandingo

[MANDINGO]

 

Still need card information keep it comming

New cards added to the system

WinTV-HVR-900
WinTV-HVR-950
WinTV-HVR-1120
WinTV-HVR-1700
WinTV-HVR-1800
WinTV-HVR-2200
WinTV-NOVA-T-Stick
WinTV-NOVA-TD-Stick
WinTV-NOVA-T-PCI
WinTV-NOVA-T-USB
WinTV-NOVA-S-USB/2
WinTV-NEXUS-S

Mandingo

[MANDINGO]

Nite_Man what is the exact TechnoTrend card model for the dvb card, what are the stickers on the card ?

Cannot find any model. The photo of the card is here.

Some more cards where added including yours so if you could check that would be great
remember to update your sqlCVS

Thanks

Mandingo

[Viking]

remember to update your sqlCVS

How do we do that ?

Thanks, keep up the good work

Viking