I've installed beta2 (dvd) , initially on the dvi output of my ' Sparkle' nvidia8400gs via a converter to a vga monitor =>
no probs....avwizard picked it up ok & I was able to play to such an extent that I decided to move to semi-production mode.
I then connected to my Sharp Acquos with a dvi to hdmi cable, i.e on same connector, and restarted.All through kubuntu splash screen tv reported 1080p @ 50Hz, but nothing showed once avwizard started- 'No worries', thought I, 'use the keyboard', which resulted in the problem.....
No matter what key I pressed the tv reports 1080p @60 Hz....incompatible signal and the wizard resets (i assume) and allows another keypress.
The M/B is a gigabyte ga-g33m-s2h with onboard intel graphics,and bios is set to "enable if no external PEG" (no disable option)........ I tried adding BusId PCI:01:00.0 (as reported by lspci )in device section of xorg.conf ..... => "unable to start x " error......
.....at that point I connected tv via vga ,rebooted, ran avwizard , and evrything ok @720p@ 60Hz
(1080p@50 Hz was no problem at all under 0710rc2)
SO ..... if anyone has any ideas on how to utilise hdmi@1080p@50Hz, it would be greatly appreciated,