Author Topic: Fresh Beta2 install failed  (Read 5078 times)

Skrelpawin

  • Making baby steps
  • Posts: 2
    • View Profile
Fresh Beta2 install failed
« on: December 02, 2009, 11:10:45 pm »
Hi everyone,

after a day full of LinuxMCE Beta2 i want to write down my persolan experiences.

First of all, i'm not upgrading from any Version. I've downloaded the newest DVD burned and verified it.

Level 1:
The installation process of Kubuntu

Result :
No Problem. I've used a free 40 GB HDD and after 15 Minutes everyting was fine.

Level 2:
The installation process of lmce

Result:
The installation runs and many lines of output were written.
I've not checked them all. Maybe my first fault. A Command not found error popped up. Then the requested reboot.

Level 3 1st try:
The second boot of the new born LMCE-System

Result:
Some of the System Deamons fail. NFS Common and Bind9 for example. Then Waiting some time in front of NFS starting the AVWizard came up but with an Analog Audio selected the Wizard restarts everytime. So i selected NoAudio and the End of the Wiz was reached. Now the Screens are Regenerated. After finishing -> Black Screen -> Reboot

Level 3 2nd try:
The third boot. Same as before but: Now the boot process stops after starting the OpenBSD sshd server. Game Over

Now i start again from the beginning.

Level 1 to 3:
Install, install, reboot, configure, broken boot process.

Enought for today. If anyone has the same problem or any ideas for an solution i'll give it a try :)

Greetings

Dominik

charlie1953

  • Regular Poster
  • **
  • Posts: 22
    • View Profile
Re: Fresh Beta2 install failed
« Reply #1 on: December 02, 2009, 11:45:38 pm »
Dom, I have had a problem with the new beta 2 DVD too.
Install kubuntu goes fine, I pick the nvidia driver, reboot, all OK.
Then I click on the LMCE script - it seems to install OK but I get the command not found popup.

(maybe thats a clue - but I ignored it and rebooted as per the instruction at the end of the script)

Then it just boot to the command line interface asking me to login.

Didn't have time to investigate further but I will watch this thread and add to it if I can.

Charlie

valent

  • Guru
  • ****
  • Posts: 381
    • View Profile
    • /kernel_reloaded/
Re: Fresh Beta2 install failed
« Reply #2 on: December 03, 2009, 12:16:13 am »
Me too :(

Here is the output of the install script:

http://fpaste.org/2r9F/

and now that I try to install additional packages I get this mysql error message:


$ sudo apt-get install rtorrent
Reading package lists... Done                                           
Building dependency tree                                                 
Reading state information... Done                                       
The following extra packages will be installed:                         
  libtorrent11 libxmlrpc-c3                                             
The following NEW packages will be installed:                           
  libtorrent11 libxmlrpc-c3 rtorrent                                     
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.           
2 not fully installed or removed.
Need to get 902kB of archives.
After this operation, 2437kB of additional disk space will be used.
Do you want to continue [Y/n]? y
WARNING: The following packages cannot be authenticated!
  libxmlrpc-c3 libtorrent11 rtorrent
Authentication warning overridden.
Get:1 http://hr.archive.ubuntu.com intrepid/universe libxmlrpc-c3 1.06.27-1 [245kB]
Get:2 http://hr.archive.ubuntu.com intrepid/universe libtorrent11 0.12.2-0ubuntu1 [324kB]
Get:3 http://hr.archive.ubuntu.com intrepid/universe rtorrent 0.8.2-0ubuntu1 [333kB]
Fetched 902kB in 2s (304kB/s)
Selecting previously deselected package libxmlrpc-c3.
(Reading database ... 122388 files and directories currently installed.)
Unpacking libxmlrpc-c3 (from .../libxmlrpc-c3_1.06.27-1_i386.deb) ...
Selecting previously deselected package libtorrent11.
Unpacking libtorrent11 (from .../libtorrent11_0.12.2-0ubuntu1_i386.deb) ...
Selecting previously deselected package rtorrent.
Unpacking rtorrent (from .../rtorrent_0.8.2-0ubuntu1_i386.deb) ...
Processing triggers for man-db ...
Setting up mysql-server-5.0 (5.0.67-0ubuntu6) ...
 * Stopping MySQL database server mysqld                                                                                                             [ OK ]
chown: cannot access `/usr/share/mysql': No such file or directory
Reloading AppArmor profiles : done.
 * Starting MySQL database server mysqld
                                                                                                                                                     [fail]
invoke-rc.d: initscript mysql, action "start" failed.
dpkg: error processing mysql-server-5.0 (--configure):
 subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of mysql-server:
 mysql-server depends on mysql-server-5.0; however:
  Package mysql-server-5.0 is not configured yet.
dpkg: error processing mysql-server (--configure):
 dependency problems - leaving unconfigured
« Last Edit: December 03, 2009, 12:18:38 am by valent »
LinuxMCE - If it was easy, everybody would be doing it!!
My setup - http://wiki.linuxmce.org/index.php/User:Valent

Zaerc

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 2256
  • Department of Redundancy Department.
    • View Profile
Re: Fresh Beta2 install failed
« Reply #3 on: December 03, 2009, 05:18:42 am »
Looks like something is preventing the mysql-server package from getting configured there, try running:

sudo apt-get install -f

And possibly creating the /usr/share/mysql directory manually could help, but should not be necessary.
"Change is inevitable. Progress is optional."
-- Anonymous


charlie1953

  • Regular Poster
  • **
  • Posts: 22
    • View Profile
Re: Fresh Beta2 install failed
« Reply #4 on: December 03, 2009, 08:57:14 am »
Where do I find my output from the install script?   :-[

charlie1953

  • Regular Poster
  • **
  • Posts: 22
    • View Profile
Re: Fresh Beta2 install failed
« Reply #5 on: December 03, 2009, 09:18:51 am »
I do not have the same mysql problem as valent - mine seems to be installed and running:
Code: [Select]
mysql> status
--------------
mysql  Ver 14.12 Distrib 5.0.67, for debian-linux-gnu (i486) using readline 5.2

Connection id:          30
Current database:
Current user:           charlie@localhost
SSL:                    Not in use
Current pager:          stdout
Using outfile:          ''
Using delimiter:        ;
Server version:         5.0.67-0ubuntu6 (Ubuntu)
Protocol version:       10
Connection:             Localhost via UNIX socket
Server characterset:    latin1
Db     characterset:    latin1
Client characterset:    latin1
Conn.  characterset:    latin1
UNIX socket:            /var/run/mysqld/mysqld.sock
Uptime:                 22 hours 15 min 8 sec

Threads: 1  Questions: 93  Slow queries: 0  Opens: 23  Flush tables: 1  Open tables: 17  Queries per second avg: 0.001
--------------

mysql>

and here is my output to Zaerc's suggestion:
Code: [Select]
charlie@soprano:~$ sudo apt-get install -f
[sudo] password for charlie:
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
charlie@soprano:~$

any other ideas??

charlie1953

  • Regular Poster
  • **
  • Posts: 22
    • View Profile
Re: Fresh Beta2 install failed
« Reply #6 on: December 03, 2009, 10:53:45 am »
OK I assume the output from the install script is not logged so I ran it again and this what I got...

Code: [Select]
Starting mce-install.sh
 3 Dec 22:35:50 ntpdate[8118]: adjust time server 91.189.94.4 offset -0.412628 sec                                                                             
Using eth0 for external interface                                               
Using eth1 for internal interface                                               
--- start mce wizard data ---                                                   
c_deviceType=2 # 1-Core, 2-Hybrid, 3-DiskedMD                                   
c_netIfaceNo=1                                                                 
c_netExtName='eth0'                                                             
c_netExtIP=''                                                                   
...
< snip >
...
c_ubuntuLiveCdFrom=1                                                           
c_ubuntuLiveCdPath=''                                                           

--- end mce wizard data ---
Hit http://nz.archive.ubuntu.com intrepid Release.gpg
Ign http://nz.archive.ubuntu.com intrepid/main Translation-en_NZ
Ign http://nz.archive.ubuntu.com intrepid/restricted Translation-en_NZ
...
< snip >
...
Hit http://security.ubuntu.com intrepid-security/multiverse Packages         
Hit http://security.ubuntu.com intrepid-security/multiverse Sources           
Reading package lists...                                                     
MESSAGE: Generating Default Config File                                       
MESSAGE: Installing MySQL Server                                             
Hit http://nz.archive.ubuntu.com intrepid Release.gpg                         
Ign http://nz.archive.ubuntu.com intrepid/main Translation-en_NZ             
Ign http://nz.archive.ubuntu.com intrepid/restricted Translation-en_NZ       
...
< snip >
...
Hit http://security.ubuntu.com intrepid-security/multiverse Packages         
Hit http://security.ubuntu.com intrepid-security/multiverse Sources           
Reading package lists...                                                     
Reading package lists...                                                     
Building dependency tree...                                                   
Reading state information...                                                 
mysql-server is already the newest version.                                   
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.               
 * Starting MySQL database server mysqld                                     
   ...done.                                                                   
Reading package lists...                                                     
Building dependency tree...                                                   
Reading state information...                                                 
pluto-sample-media is already the newest version.                             
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.               
Reading package lists...                                                     
Building dependency tree...                                                   
Reading state information...                                                 
video-wizard-videos is already the newest version.                           
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.               
MESSAGE: Installing LinuxMCE Base Software                                   
Reading package lists...                                                     
Building dependency tree...                                                   
Reading state information...                                                 
Package pluto-dcerouter is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or               
is only available from another source                                           
E: Package pluto-dcerouter has no installation candidate                       

ERROR : Failed to install and configure the base software

Running post-install.sh
post-install.sh: line 2: /usr/pluto/bin/nvidia-install.sh: No such file or directory                                                                           
removed `/etc/rc3.d/README'                                                     
removed `/etc/rc3.d/S01policykit'                                               
removed `/etc/rc3.d/S05vbesave'                                                 
removed `/etc/rc3.d/S10acpid'                                                   
...
< snip >
...
`/etc/rc2.d/S99rmnologin' -> `/etc/rc5.d/S99rmnologin'
`/etc/rc2.d/S99stop-readahead' -> `/etc/rc5.d/S99stop-readahead'
`/etc/rc5.d/S99linuxmce' -> `/etc/init.d/linuxmce'
grep: /etc/asterisk/modules.conf: No such file or directory
sed: can't read /etc/asterisk/modules.conf: No such file or directory
grep: /etc/asterisk/modules.conf: No such file or directory
sed: can't read /etc/asterisk/modules.conf: No such file or directory
grep: /etc/asterisk/modules.conf: No such file or directory
sed: can't read /etc/asterisk/modules.conf: No such file or directory
Remove softlink to start KDM
 Removing any system startup links for /etc/init.d/kdm ...
You must specify at least one of -c, -u, or -d.

Usage: /usr/sbin/update-initramfs [OPTION]...

Options:
 -k [version]   Specify kernel version or 'all'
 -c             Create a new initramfs
 -u             Update an existing initramfs
 -d             Remove an existing initramfs
 -t             Take over a custom initramfs with this one
 -b             Set alternate boot directory
 -v             Be verbose
 -h             This message


The first phase of the install process is completed
Reboot the system to start the final process.

Done!


The pop up error is titled "Error - KdeSudo" and the message says "Command not found!"

The problem appears to be in the line:
Quote
Package pluto-dcerouter is not available, but is referred to by another package.

After that it all turns to custard.
 ???

unk95

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Fresh Beta2 install failed
« Reply #7 on: December 03, 2009, 07:20:53 pm »
I did a fresh install (DVD install) and had the same error message as charlie1953.

I am trying new net install - will keep posted.

roberto99

  • Veteran
  • ***
  • Posts: 101
  • ...dreams of becoming a LMCExpert
    • View Profile
Re: Fresh Beta2 install failed
« Reply #8 on: December 03, 2009, 07:56:24 pm »
I did the dvd install (everything as a virtual machine on vmware server), configured network, installed vmware tools, installed lmce, reboot and i end up at a command line login... what do i do there or should i end up somewhere else? I logged in as the user I had created installing kubuntu. I tried the command /usr/pluto/bin/Diskless_CreateTBZ.sh but it gives me errors

Any hint? Thanks

freaky

  • Regular Poster
  • **
  • Posts: 24
    • View Profile
Re: Fresh Beta2 install failed
« Reply #9 on: December 03, 2009, 08:27:19 pm »
I had trouble installing from DVD also. Since today the new installer file is online - so I will try installing beta2 via web, like explained here:

http://wiki.linuxmce.com/index.php/LinuxMCE-0810_beta

hope this works better with my machine now. Can't wait to have this system running.

freaky

krys

  • Addicted
  • *
  • Posts: 583
    • View Profile
Re: Fresh Beta2 install failed
« Reply #10 on: December 03, 2009, 10:04:29 pm »
I have got the KDE error with every install of both beta and beta2, but LMCE has never seemed to be affected by the error and upon reboot everything seems to work fine.

pedplar

  • Veteran
  • ***
  • Posts: 89
    • View Profile
Re: Fresh Beta2 install failed
« Reply #11 on: December 04, 2009, 04:02:39 am »
I have also gotten the error on both betas dvd.  could never get beta 1 to work, I haven't had any problems with beta2 dvd, except for that error, at least not on the core.

bongowongo

  • wants to work for LinuxMCE
  • **
  • Posts: 826
    • View Profile
Re: Fresh Beta2 install failed
« Reply #12 on: December 04, 2009, 08:56:34 am »
I had problem with DVD, that it could not use gparted in the kubuntu installation.
Making sure this is not a problem with a wrong burn or wrongly downloaded ISO
Got net-install working.

charlie1953

  • Regular Poster
  • **
  • Posts: 22
    • View Profile
Re: Fresh Beta2 install failed
« Reply #13 on: December 04, 2009, 10:58:01 am »
OK so i used the DVD - it installed kubuntu but the LMCE install script failed.
So I  logged in and ran the commands in the wiki (link provided by Freaky) - took a while but no problems encountered.
I have now successfully installed Beta2  - worked like a charm.
now the fun starts - thanks to all who have helped.

Skrelpawin

  • Making baby steps
  • Posts: 2
    • View Profile
Re: Fresh Beta2 install failed
« Reply #14 on: December 04, 2009, 02:19:53 pm »
Hi there,

solved my problem. My second Netwok adapter is history. Now with a new on the setup works fine for me (exept the kde popup Command not found).
Never thought that a broken NIC could make so much trouble.
Let's see how lmce beta2 works....