Thanks for the response. I only put 1 HD in to see if it would reconize it and let me use it. I have check the reconfigure device and tried restarting. I have not been creating my raid then letting LCME find it. LCME created my raid for me. The raid I had in my machine came from my 710 box and worked great every time I put back in the 710 box. I broke the raid apart in hope that 810 would build it correctly.
Has anyone got 810 to use a HD correctly. I would like to use Raid0 just for the large space. Any help would be great and if anyone else is having problems post here and let see what is going on.
I have some (limited) experiences with RAID in lmce 810.
I managed to create a raid 5 system consisting 4 1TB disks by using the LMCU GUI. Initially I faced som problems since one of the disk had a bad sata cable which prevented me to buils the raid.
After replacing the faulty sata cable I could build the raid sucesfully and LINUXMCE created the filesystem and mount points (i.e. /home/public/data/video, audio etc) to the raid.
It seems to be working ok to some point but I have some issues for instance the raid is not always visible in the /mnt/device/ directory and when I ran the e2fsck command on the raid it stated that the raid had been mounted more then 4000 times during the past month, which leeds me to believe that it is constantly beeing mounted/unmounted by my lmce setup.
By looking at your screen shots I believe that you should "tick" the box "Use Automatically" that will most likely do that your raid is mounted and you could start to use it, since it seems that your raid has been created sucessfully.
It would be intresting to know if this would help, aswell if you experience the same issue as I have with the raid constantly beeing mounted/unmounted.