After happily anticipating the new release, I have installed pluto on a machine with 3 network interface cards. 2 of these NICs are built-into the motherboard and cannot be removed. One of the built-in cards is problematic. Therefore, I installed a new card (the 3rd). Unfortunately, Pluto doesn't give me a choice of which 2 cards to use. These cards are listed as et0, eth1, and eth2. eth0 is the bad card that eth2 has replaced.
Each time I want to get eth2 to work, I have to manually edit the /etc/network/interfaces file and do a /etc/init.d/networking restart. These changes don't hold between reboots.
Does anyone know of where to make these changes so they hold? The last resort I'd use is changing the /usr/pluto/bin/Network_Setup.sh script. (BTW, that script only has variables for eth0 and eth1 hardcoded into it. Not exactly the most elegant solution, but understandable since most people would only need 2 NICs.)