Author Topic: Dianemo from CHT - Professional Home Automation  (Read 359762 times)

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Dianemo S from CHT - Ubuntu 12.04LTS Release Now Shipping World Wide!
« Reply #375 on: September 22, 2013, 11:16:32 am »
Switching inputs automatically could be done but on the TV of course and the Rpi. However the TV has to support it.

As to RAM on Rpi I'm not sure as all ours are 512mb. I've no feedback on which Rpi XBMC Firmware is best.

We have not used UI2 for a longtime so none of our installers customers will have used it. When we still used MM's we decided to used a consistent UI on both MM's and Orbiters and that is UI1 running our Dianemo skin.

All the best

Andy
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Update Available - HeatMiser
« Reply #376 on: September 27, 2013, 02:50:02 pm »
We have released an update today that allows you to interface Dianemo to a Heatmiser  ( http://www.heatmiser.com/index.php/network-products/internet-control )heating management/control system. Simply configure your Heatmiser system as you require and then allow Dianemo to automatically pickup all your heating zones/devices. Then use your Orbiters to manage and control your heating.

As usual please use the Updater script to update your system with this update and any pending Ubuntu updates too.

All the best

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Update Available - Updated DCErouter
« Reply #377 on: November 11, 2013, 05:55:45 pm »
We have released an updated DCErouter package that fixes a number of bugs and allows the router to be more tolerant of certain device conditions. There are no end-user facing changes in this update.

As usual please run the Updater script to update your system with this update and any other pending updates for either Dianemo or Ubuntu.

All the best

Andy
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5549
  • DOES work for LinuxMCE.
    • View Profile
Re: Dianemo S from CHT - Ubuntu 12.04LTS Release Now Shipping World Wide!
« Reply #378 on: November 11, 2013, 06:01:08 pm »
What were the changes? would they be of use to LMCE?

-Thom

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Dianemo S from CHT - Ubuntu 12.04LTS Release Now Shipping World Wide!
« Reply #379 on: November 11, 2013, 06:27:20 pm »
What were the changes? would they be of use to LMCE?

-Thom

Thom - I understand from Uplink that he has already given you access to his tree and the ticket that relates to these changes... all the changes are there. As to whether they will be useful without additional work I cant say.

All the best

Andy
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3675
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: Dianemo S from CHT - Ubuntu 12.04LTS Release Now Shipping World Wide!
« Reply #380 on: November 11, 2013, 10:56:36 pm »
Thom,

Radu put the stuff under peoples in case you want to check them out, when you have some spare time.

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Update Available - Fix for Spurious DHCP Requests
« Reply #381 on: November 14, 2013, 05:22:17 pm »
We have released an update today that fixes a long standing and irritating bug that would periodically display spurious Orbiter announcements about new devices having been added to a system. These messages should now only appear when a new IP device is actually added to your system.

This fix was pushed to the LinuxMCE SVN at the same time as this bug has been around since the Pluto days.

As usual please run the Dianemo Software Update script to install this and any pending Dianemo or Ubuntu updates to your NC.

All the best

Andrew
« Last Edit: November 14, 2013, 05:24:57 pm by totallymaxed »
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Update Available - SqueezeLite and Support for Spotify
« Reply #382 on: December 05, 2013, 03:18:24 pm »
We have released an update today that adds support for SqueezeLite to Dianemo. SqueezeLite is an alternative to SqueezeSlave (we will continue to support both packages) that supports the Spotifiy plugin too LMS - and that is the main gain you get from choosing it over SqueezeSlave. See the updated 'Adding SqueezeSlave & SqueezeLite Devices' section on the Dianemo Wiki page below for details of configuring SqueezeLites on your system;

http://wiki.linuxmce.org/index.php/Dianemo_S#Adding_SqueezeSlave_.26_SqueezeLite_Devices

As usual please run the Dianemo Software Update script to install this and any pending Dianemo or Ubuntu updates to your NC.

All the best

Andrew
« Last Edit: December 05, 2013, 05:17:47 pm by totallymaxed »
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

bugui

  • Veteran
  • ***
  • Posts: 70
    • View Profile
Re: Dianemo S from CHT - Ubuntu 12.04LTS Release Now Shipping World Wide!
« Reply #383 on: January 06, 2014, 08:24:55 am »
Hello Andrew,
Is there some new installer deb ???
the .19version of the dianemo installer hangs then it try to start the installation by mythbuntu repos.

Thanks
Hernan Bugallo

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Dianemo S from CHT - Ubuntu 12.04LTS Release Now Shipping World Wide!
« Reply #384 on: February 20, 2014, 03:02:47 pm »
Hello Andrew,
Is there some new installer deb ???
the .19version of the dianemo installer hangs then it try to start the installation by mythbuntu repos.

Thanks
Hernan Bugallo

Yes the current version is v1.21 which I've sent to you.

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Update Available - CM15A Device Template
« Reply #385 on: February 20, 2014, 03:24:39 pm »
We have added a new device template (Template ID 2059) for the CM15A X10 USB interface today. If you use X10 then I think you'll be very interested in this update. Anyone who has contacted me re the CM15A in recent months should also find this update addresses any problems they may have reported.

As usual please run the Updater script to update your system with this update and any others that are waiting to be applied (Dianemo or Ubuntu).

All the best

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Update: CHT Announce Crowdfunding campaign on Crowdcube
« Reply #386 on: March 10, 2014, 01:32:50 pm »
We've launched a Crowdcube campaign to raise funding to expand sales in both our existing lines of business and to move into new ones. We're hoping to attract a wide range of investors, both small & large, to invest in CHT as we expand the business. If this sounds of interest to you then please visit our Crowdcube page below - and please feel free to forward this information to anyone you feel night also be interested;

http://www.crowdcube.com/investment/convergent-home-technologies-14097

If you have questions about our Crowdcube campaign or about anything else related to Dianemo/CHT please post them in this thread. If you've registered on the Crowdcube site then you can also aks questions there too.

Thanks for your time.

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Update Available - Use a Vera Lite or Vera 2 as your Zwave Interface
« Reply #387 on: March 21, 2014, 02:07:40 pm »
We have released an update that enables you to add a Vera Lite as your Zwave interface. We support the following Vera models;

*Vera 2
*Vera Lite

You can add a Vera that you may already own, and that has already has been configured, and has Zwave devices included to it and they will automatically be detected and added as Dianemo Zwave devices in the device tree. You can also take a new Vera and configure it from scratch and then add it to your system too. See the Wiki entry below for the steps you need to follow to add a Vera to your system as your Zwave interface;

http://wiki.linuxmce.org/index.php/Dianemo_S#Adding_A_Vera_Lite_to_you_System

As usual please run the Updater script to download and install this update and any previous Dianemo or Ubuntu updates your system may not have had installed yet.

All the best

Andy
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

acald

  • Regular Poster
  • **
  • Posts: 33
    • View Profile
Re: Update Available - Use a Vera Lite or Vera 2 as your Zwave Interface
« Reply #388 on: April 22, 2014, 03:05:45 pm »
Does this mean that LinuxMCE/Dianemo will be able to control Zwave encryption items? Specifically door locks?

In this scenario, does the Vera issue the commands to the ZWave devices or does the Dianemo box.


We have released an update that enables you to add a Vera Lite as your Zwave interface. We support the following Vera models;

*Vera 2
*Vera Lite

You can add a Vera that you may already own, and that has already has been configured, and has Zwave devices included to it and they will automatically be detected and added as Dianemo Zwave devices in the device tree. You can also take a new Vera and configure it from scratch and then add it to your system too. See the Wiki entry below for the steps you need to follow to add a Vera to your system as your Zwave interface;

http://wiki.linuxmce.org/index.php/Dianemo_S#Adding_A_Vera_Lite_to_you_System

As usual please run the Updater script to download and install this update and any previous Dianemo or Ubuntu updates your system may not have had installed yet.

All the best

Andy

« Last Edit: April 22, 2014, 03:10:49 pm by acald »

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Update Available - Use a Vera Lite or Vera 2 as your Zwave Interface
« Reply #389 on: April 29, 2014, 06:01:49 pm »
Does this mean that LinuxMCE/Dianemo will be able to control Zwave encryption items? Specifically door locks?

In this scenario, does the Vera issue the commands to the ZWave devices or does the Dianemo box.

As mentioned on the wiki we currently only support lighting & heating devices from Dianemo via Vera. As far as i know Vera does support Zwave encryption and therefore Zwave locks should work (Please check with Vera to verify that your locks are supported though). If the Vera supports a particular type of ZWave class or type of device then we can support it by adding a new device template in Dianemo. If you need door lock support then we would be happy to add this support if you are willing to help with your time & access to the Zwave Door lock hardware.

All the best

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk