Thanks for the post, i had been looking for the sharp tv one but found the wiki empty as well. I have looked through the LG wiki you posted but have a few questions after reading it and comparing it to the spec document i have for my tv.
Current Data Comments Default Value
#37 COM Port on PC(string) The serial port
#76 COM Port ParityBit/Stop(string) Parity/Stop bits (factory defaults) N81
#78 COM Port BaudRate(string) Baud rate (factory default) B9600
#157 Discrete Volume(bool) Indicates if the volume on... 1
Settings are factory defaults and shouldn't be changed (9600 baud rate, 8 bits, 1 stop bit). Make sure that the check box for Allowed to Modify is checked, so that you can change to the appropriate COM port later. "
But according to my spec document i should set the baud rate to 19200 and no parity. Are there major issues if i do this? (Once i get my machine up and running i might go for trial and error here if there are no answers....)
Secondly i am not sure how to deliver the payload to my TV. The spec document calls for a very long string to be sent, much longer than in the LG example IE;
EF BE 10000 329 E8 1111 000 10C which is much longer than the LG example.
Can anyone help me out with this?