Now I'm almost there. I've got a setup like this:
Hybrid with Nova-T DVB card.
MD, EPIA MII 1200. No cards.
When I had my fresh install of the hybrid I added my DVB card under Advanced->Configuration->Device Templates. I selected Hauppauge and Digital TV Cards #143, named my card Nova-T DVB and pushed 'Add'. In the template I only added:
This device is controlled via category: Device Category: Media Director
Then saved the template.
I also added my card to the hybrid using Wizard->Devices->Media Directors and selected it under 'PVR capture card'.
Under Advanced->Configuration->Devices -> The core hybrid, I deleted Mythv application.
I put a working channels.conf in /var/lib/vdrdevel. After rebooting I was able to watch TV
I created a new Media director, without Myhtv but with VDR. Nothing more here.
I rebooted again and tried playing som mp3's that I uploaded to the core/hybrid. After making some changes, i.e creating a floorplan and adding my MD's I was able to simultaniously (spell?) play different music on the two MD's.
Now to VDR.
In /var/log/pluto/39_VDR.newlog I can see this:
10 07/05/06 8:41:01.952 Device: 28 starting. Connecting to: 127.0.0.1
10 07/05/06 8:41:02.129 This MD has a DVB card. Will use local xine
10 07/05/06 8:41:02.132 Connect OK
10 07/05/06 8:41:02.132 Requesthandler 0x8070820 (device: 28) runThread now running
10 07/05/06 10:09:11.700 Will start with channel 1
05 07/05/06 10:09:11.700 Going to send command CHAN 1
10 07/05/06 10:09:11.731 connected
05 07/05/06 10:09:12.146 VDR Responded 250 1 SVT1
01 07/05/06 10:09:12.163 VDR processed ok, channel 1 / SVT1
10 07/05/06 10:09:12.163 Could not find a handler for message - from 10 to 28 Type: 1 ID: 192 (device: 28) Command_Impl1 Dev #28
And when checking the MD's log
dcerouter_5337:/home/diskless/192.168.80.2/var/log/pluto$ more 39_VDR.newlog
VDR, v.2.0.0.39
Visit
www.plutohome.com for source code and license information
10 07/05/06 8:41:05.889 Device: 39 starting. Connecting to: 192.168.80.1
10 07/05/06 8:41:05.954 This MD has no DVB card, but core does. Will use xine on 192.168.80.1
10 07/05/06 8:41:05.955 Connect OK
10 07/05/06 8:41:05.955 Requesthandler 0x8070820 (device: 39) runThread now running
10 07/05/06 10:02:40.356 Will start with channel 1
05 07/05/06 10:02:40.356 Going to send command CHAN 1
10 07/05/06 10:02:40.357 connected
05 07/05/06 10:02:40.910 VDR Responded 250 1 SVT1
01 07/05/06 10:02:41.263 VDR processed ok, channel 1 / SVT1
10 07/05/06 10:02:41.263 Could not find a handler for message - from 10 to 39 Type: 1 ID: 192 (device: 39) Command_Impl1 Dev #39
Things look alright but the problem is that when I start watching TV on the MD ( EPIA ), the audio plays on the hybrid and I get a black screen on the MD. I'm running an Orbiter on my WinXP laptop and I do get the remote in the same way both for the MD as for the hybrid. All playing well on the hybrid, but on the MD it's a black screen and the audio plays on the hybrid.
For clarification. I do switch between Server room and Kitchen, as the rooms are named at my setup. ( Hybrid in serverroom and MD in kitchen that is ).
Please help me out on this one!
/Nivis
Btw. How does the picture viewer work. I've added a jpeg to the public picture area, but can't watch it. Media Files & Sync says that it exists both on disk and in db?
