Author Topic: Easy for you? Rescue data from screwy and/or failing HDD  (Read 2144 times)

Frank Stein

  • Making baby steps
  • Posts: 3
    • View Profile
Easy for you? Rescue data from screwy and/or failing HDD
« on: May 01, 2009, 06:23:45 pm »
I have setup a dual boot system with linuxmce and mythdora booting off of my first 30 gb ide hd.  I stored my recordings and songs etc on a second 320gb Hitachi ide hd plus had my swap partition there.  Things were going along so so.  Let’s just say - I'd run into something and research and learn something new.  Well - now I am in sortof a jam.  In fact I am not sure where to start.  I think i was adding a 3rd boot option.  Used gparted to add another partition and added a third operating system - mepis.  Anyway - started having intermittent difficulties finding my recordings and now I can't even see the drive.

For trouble shooting – I have pulled IDE1 and moved the flaky drive to primary. 

Using Hitachi drive fitness test software from boot cd (I have a Hitachi drive – mfg in July 2008) it checks the drives and errors out with the 0x70 - corrupted sector error.  Of course for some reason if I click to repair it - the software tells me it is not a Hitachi drive and refuses to repair it. 

Ok - so using Mepis live cd - I looked at the drive in Gparted.  Turns out the boot flag was on in the first partition - where I installed Mepis.  I don't know if pc's like having two drives both with a boot flag on??  I used Gparted to turn the flag off. 

No matter what though – it would not let me mount any partition of the drive.  Currently if I try to mount the recordings partition in Gparted – it says Could Not Mount:  wrong fs type, bad option, bad superblock on /dev/sda6, missing codepage or other error.

Sometimes when I try to boot the Mepis live CD it locks up on: 
waiting for /dev to be fully populated.  – and never loads the os.

Okay - so I think the drive is getting flaky and failing.  So my questions are:
1.  How can I make sure it is dead/dieing?
2.  If I can get it recognized long enough - what is the best way to force it to mount and copy the data over to an external usb drive?
3.  If it is not bad and is flaky because of my goofing around with it - what do I need to do to get it back acting normal?

Thanks in advance and any help even if pointing in a research direction is appreciated.

Frank

nosebreaker

  • Guru
  • ****
  • Posts: 202
    • View Profile
Re: Easy for you? Rescue data from screwy and/or failing HDD
« Reply #1 on: May 02, 2009, 01:52:41 am »
So firstly yes of course you should replace the drive, its failing now!  Well I've had luck with a CD called "Recovery is Possible" aka RIP.  I would then boot off a Ubuntu or some other LiveCD and copy the data onto another drive right away.  Sorry I couldn't give you more info, but the second you get that drive working copy as much off ASAP and don't power off the system until its done!