Author Topic: 0810 aplpha2 (updated to 090515) - diskless setup feedback  (Read 4539 times)

Viking

  • Addicted
  • *
  • Posts: 521
    • View Profile
Hi,

I am just right now trying out the 0810 with my MD. The Core was installed 2 months ago, but updated with "apt-get upgrade".

For more info on my system - see users link in my footer.

Some of the instructions here are still needed :
http://wiki.linuxmce.org/index.php/LinuxMCE-0810_alpha1#Setup_Diskless_MD

>  On core from a terminal run sudo /usr/pluto/bin/Diskless_BuildDefaultImage.sh

without this there is no /tftpboot/pxelinux.cfg/default file

# Boot MD
# Rundiskless setup fails, but the device gets created
# Change md to i386 in webadmin

# reboot MD

Now the Diskless setup was done, but then at the end an error message came on console 8

topic "AVWizard"
message "Failed to setup X"



I then did
#  On the core

   1. Set a password for root on MD
         1. chroot /usr/pluto/diskless/<##>
         2. run passwd.... enter password for root


# From core copy valid xorg.conf from etc/X11 to /usr/pluto/diskless/##/etc/X11

# reboot MD

Did not help :(


Any ideas ?

Greetings
Viking

/usr/pluto/diskless/31/var/log$ cat Xorg.2.log
Code: [Select]
(II) config/hal: initialized
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux moon31 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686
Build Date: 09 March 2009  10:48:54AM
xorg-server 2:1.5.2-2ubuntu3.1 (buildd@rothera.buildd)
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.2.log", Time: Mon May 18 13:10:43 2009
(++) Using config file: "/etc/X11/xorg.conf.pluto.avwizard"
Parse error on line 9 of section Files in file /etc/X11/xorg.conf.pluto.avwizard
        "RgbPath" is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error parsing the config file

Fatal server error:
no screens found
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
(WW) xf86OpenConsole: VT_GETSTATE failed: Bad file descriptor


# dpkg -l |grep nvidia
Code: [Select]
ii  nvidia-173-modaliases                      173.14.12-1-0ubuntu5.1                      Modaliases for the NVIDIA binary X.Org drive
ii  nvidia-177-modaliases                      177.82-0ubuntu0.1                           Modaliases for the NVIDIA binary X.Org drive
ii  nvidia-180-kernel-source                   180.11-0ubuntu1~intrepid1                   NVIDIA binary kernel module source
ii  nvidia-180-modaliases                      180.11-0ubuntu1~intrepid1                   Modaliases for the NVIDIA binary X.Org drive
ii  nvidia-71-modaliases                       71.86.04-0ubuntu10                          Modaliases for the NVIDIA binary X.Org drive
ii  nvidia-96-modaliases                       96.43.09-0ubuntu1.1                         Modaliases for the NVIDIA binary X.Org drive
ii  nvidia-common                              0.2.4.1                                     Find obsolete NVIDIA drivers
ii  nvidia-glx-180                             180.11-0ubuntu1~intrepid1                   NVIDIA binary Xorg driver
ii  nvidia-settings                            177.78-0ubuntu2.1                           Tool of configuring the NVIDIA graphics driv
ii  pluto-nvidia-video-drivers                 2.0.0.44.09042921929                        <insert up to 60 chars description>

Also changing driver to 177 version did not help !


pigdog

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1105
    • View Profile
Re: 0810 aplpha2 (updated to 090515) - diskless setup feedback
« Reply #1 on: May 18, 2009, 02:10:48 pm »
Hi,

Update to alpha 2.20.

You'll be running Nvidia 180 and generic .14

Cheers.

Viking

  • Addicted
  • *
  • Posts: 521
    • View Profile
Re: 0810 aplpha2 (updated to 090515) - diskless setup feedback
« Reply #2 on: May 18, 2009, 04:13:24 pm »
Hi,

I am already running alpha2.20 (thats the same as 20090515). It also did install nvidia-glx-180

What do you mean with "generic .14" ?

Greetings
Viking

pigdog

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1105
    • View Profile
Re: 0810 aplpha2 (updated to 090515) - diskless setup feedback
« Reply #3 on: May 18, 2009, 04:40:43 pm »
Hi,

uname -r will show what generic you are running.

If you are alpha 2.20 you will be running (should be running) the .14 generic.

You did an apt-get dist-upgrade as well as the apt-get update?

Cheers.
« Last Edit: May 18, 2009, 04:44:20 pm by pigdog »

Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3675
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: 0810 aplpha2 (updated to 090515) - diskless setup feedback
« Reply #4 on: May 18, 2009, 07:33:05 pm »
I am just right now trying out the 0810 with my MD. The Core was installed 2 months ago, but updated with "apt-get upgrade".

Please create a new installation. apt-get upgrade'ing a broken an installation (and I would call an alpha installation from 2 month ago broken) will most likely not succeed.

Save yourself some pain, reinstall kubuntu 0810, and do a fresh install of LinuxMCE 810.

merkur2k

  • Addicted
  • *
  • Posts: 513
    • View Profile
Re: 0810 aplpha2 (updated to 090515) - diskless setup feedback
« Reply #5 on: May 18, 2009, 08:23:54 pm »
Yep, I tried to do the same thing (fix diskless MD creation on an alhpa2 install) and finally just gave up and reinstalled the newest alpha. much easier.