Author Topic: Help... ATI Radeon HD 2400 - Machine Freezes  (Read 5716 times)

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4540
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #30 on: April 02, 2009, 10:59:49 am »
Ok, so I have followed your instructions and I have modified the .c file to include the line for my remote.  I am looking at the INSTALL file for instructions on how to build and install the modified code.  it runs the configure routine and brings me to an ASCII style screen and asks me to select a driver.  I scroll down to USB and then inside there I don't have an option for my remote or the mceusb2 driver.  What selection should I choose?

There is an option for selecting an MCE Remote/Receiver in the configure utility after you select USB. Use the down-arrow key until you see it and then select it.

Andrew
Andy Herron,
Convergent Home Technologies Ltd

My Blog; http://ellipticalcurve.com

Get RaspSqueeze-CEC or Raspbmc-CEC Wifi enabled for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

For Smart Home consulting advice;
@herron on Twitter, inquiries@ellipticalcurve.com via email or PM me here.

Get a Dianemo License: http://forum.linuxmce.org/index.php?topic=8880.msg100221#msg100221
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

cleardata

  • Regular Poster
  • **
  • Posts: 35
    • View Profile
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #31 on: April 02, 2009, 11:33:44 am »
correct, the choices are:

a - q

the last 2 have:

p   Windows Media Center Remotes (old version, MicroSoft USB ID)
q   Windows Media Center Remotes (new version, Philips et al.)

I was thinking there should have been a selection based on my vendor that I added to the .c file...    And because there isn't maybe I didn't compile it correctly?

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4540
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #32 on: April 02, 2009, 11:45:56 am »
correct, the choices are:

a - q

the last 2 have:

p   Windows Media Center Remotes (old version, MicroSoft USB ID)
q   Windows Media Center Remotes (new version, Philips et al.)

I was thinking there should have been a selection based on my vendor that I added to the .c file...    And because there isn't maybe I didn't compile it correctly?

Dont forget that your vendor is manufacturing and MCE compatible remote that is designed to work as a replacement/alternative to the MS branded equivalent. You should choose the 'new version, Philips' option.

Andrew
Andy Herron,
Convergent Home Technologies Ltd

My Blog; http://ellipticalcurve.com

Get RaspSqueeze-CEC or Raspbmc-CEC Wifi enabled for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

For Smart Home consulting advice;
@herron on Twitter, inquiries@ellipticalcurve.com via email or PM me here.

Get a Dianemo License: http://forum.linuxmce.org/index.php?topic=8880.msg100221#msg100221
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

cleardata

  • Regular Poster
  • **
  • Posts: 35
    • View Profile
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #33 on: April 03, 2009, 03:49:20 am »
First I just want to say thanks for all your help.

So I chose the option you specified and it began the build.  However at the end it gave a few errors when trying to "touch" files.  Now, something I have had problems with is knowing what the real root password is.  I chose a password during install for the LinuxMCE user but I was never prompted for a root password.  Is it that I wasn't able to compile as root?  I did put the "sudo" command in front of the setup command that was outlined in the INSTALL document.  Here is the output I received after choosing the options in the ASCII window.

Code: [Select]
setup.sh written by Karsten Scheibler, 1999-JUN-28

If you have problems or questions please consult the mailing list
<http://lists.sourceforge.net/mailman/listinfo/lirc-list>

Configuration: .setup.config, executable shell script: configure.sh
Starting the generated shell script which will call configure with the right
parameters...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for mknod... /bin/mknod
checking for mkfifo... /usr/bin/mkfifo
checking for depmod... /sbin/depmod
checking for libusb-config... no
checking whether ln -s works... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking for ANSI C header files... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for gethostname... yes
checking for gettimeofday... yes
checking for mkfifo... yes
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtoul... yes
checking for snprintf... yes
checking for strsep... yes
checking for vsyslog... yes
checking for daemon... yes
checking for forkpty... no
checking for forkpty in -lutil... yes
checking vga.h usability... no
checking vga.h presence... no
checking for vga.h... no
checking for X... no
checking for getopt_long... yes
checking for mktemp... yes
checking for Linux kernel sources... /lib/modules/2.6.22-14-generic/build/
checking for which drivers can be installed on this system...
checking for caraca_init in -lcaraca_client... no
checking iguanaIR.h usability... no
checking iguanaIR.h presence... no
checking for iguanaIR.h... no
checking for ir_strerror in -lirman... no
checking for ir_strerror in -lirman_sw... no
checking portaudio.h usability... no
checking portaudio.h presence... no
checking for portaudio.h... no
checking alsa/asoundlib.h usability... no
checking alsa/asoundlib.h presence... no
checking for alsa/asoundlib.h... no
checking scsi/sg.h usability... yes
checking scsi/sg.h presence... yes
checking for scsi/sg.h... yes
checking linux/input.h usability... yes
checking linux/input.h presence... yes
checking for linux/input.h... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating drivers/Makefile
config.status: creating drivers/lirc_atiusb/Makefile
config.status: creating drivers/lirc_bt829/Makefile
config.status: creating drivers/lirc_cmdir/Makefile
config.status: creating drivers/lirc_dev/Makefile
config.status: creating drivers/lirc_gpio/Makefile
config.status: creating drivers/lirc_i2c/Makefile
config.status: creating drivers/lirc_igorplugusb/Makefile
config.status: creating drivers/lirc_ttusbir/Makefile
config.status: creating drivers/lirc_imon/Makefile
config.status: creating drivers/lirc_it87/Makefile
config.status: creating drivers/lirc_mceusb/Makefile
config.status: creating drivers/lirc_mceusb2/Makefile
config.status: creating drivers/lirc_parallel/Makefile
config.status: creating drivers/lirc_sasem/Makefile
config.status: creating drivers/lirc_serial/Makefile
config.status: creating drivers/lirc_sir/Makefile
config.status: creating drivers/lirc_streamzap/Makefile
config.status: creating daemons/Makefile
config.status: creating tools/Makefile
config.status: creating doc/Makefile
config.status: creating doc/man/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands

You will have to use the lirc_mceusb2 kernel module.

Now enter 'make' and 'make install' to compile and install the package.

Making install in drivers
make[1]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers'
Making install in lirc_dev
make[2]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
cd ../.. && \
          /bin/sh /usr/src/lirc-0.8.2+lmce/missing --run automake-1.6 --gnu  drivers/lirc_dev/Makefile
/usr/src/lirc-0.8.2+lmce/missing: line 46: automake-1.6: command not found
WARNING: `automake-1.6' is missing on your system.  You should only need it if
         you modified `Makefile.am', `acinclude.m4' or `configure.in'.
         You might want to install the `Automake' and `Perl' packages.
         Grab them from any GNU archive site.
touch: cannot touch `./drivers/lirc_gpio/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_it87/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_mceusb/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_igorplugusb/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_sasem/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_parallel/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_bt829/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_imon/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_ttusbir/Makefile.in': Permission denied
touch: cannot touch `./drivers/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_atiusb/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_streamzap/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_serial/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_i2c/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_dev/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_sir/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_mceusb2/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_cmdir/Makefile.in': Permission denied
touch: cannot touch `./tools/Makefile.in': Permission denied
touch: cannot touch `./Makefile.in': Permission denied
touch: cannot touch `./doc/Makefile.in': Permission denied
touch: cannot touch `./doc/man/Makefile.in': Permission denied
touch: cannot touch `./daemons/Makefile.in': Permission denied
mv Makefile Makefile.automake
mv: cannot move `Makefile' to `Makefile.automake': Permission denied
make[2]: *** [lirc_dev.o] Error 1
make[2]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers'
make: *** [install-recursive] Error 1

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4540
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #34 on: April 03, 2009, 11:53:25 am »
First I just want to say thanks for all your help.

So I chose the option you specified and it began the build.  However at the end it gave a few errors when trying to "touch" files.  Now, something I have had problems with is knowing what the real root password is.  I chose a password during install for the LinuxMCE user but I was never prompted for a root password.  Is it that I wasn't able to compile as root?  I did put the "sudo" command in front of the setup command that was outlined in the INSTALL document.  Here is the output I received after choosing the options in the ASCII window.

Code: [Select]
setup.sh written by Karsten Scheibler, 1999-JUN-28

If you have problems or questions please consult the mailing list
<http://lists.sourceforge.net/mailman/listinfo/lirc-list>

Configuration: .setup.config, executable shell script: configure.sh
Starting the generated shell script which will call configure with the right
parameters...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for mknod... /bin/mknod
checking for mkfifo... /usr/bin/mkfifo
checking for depmod... /sbin/depmod
checking for libusb-config... no
checking whether ln -s works... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking for ANSI C header files... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for gethostname... yes
checking for gettimeofday... yes
checking for mkfifo... yes
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtoul... yes
checking for snprintf... yes
checking for strsep... yes
checking for vsyslog... yes
checking for daemon... yes
checking for forkpty... no
checking for forkpty in -lutil... yes
checking vga.h usability... no
checking vga.h presence... no
checking for vga.h... no
checking for X... no
checking for getopt_long... yes
checking for mktemp... yes
checking for Linux kernel sources... /lib/modules/2.6.22-14-generic/build/
checking for which drivers can be installed on this system...
checking for caraca_init in -lcaraca_client... no
checking iguanaIR.h usability... no
checking iguanaIR.h presence... no
checking for iguanaIR.h... no
checking for ir_strerror in -lirman... no
checking for ir_strerror in -lirman_sw... no
checking portaudio.h usability... no
checking portaudio.h presence... no
checking for portaudio.h... no
checking alsa/asoundlib.h usability... no
checking alsa/asoundlib.h presence... no
checking for alsa/asoundlib.h... no
checking scsi/sg.h usability... yes
checking scsi/sg.h presence... yes
checking for scsi/sg.h... yes
checking linux/input.h usability... yes
checking linux/input.h presence... yes
checking for linux/input.h... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating drivers/Makefile
config.status: creating drivers/lirc_atiusb/Makefile
config.status: creating drivers/lirc_bt829/Makefile
config.status: creating drivers/lirc_cmdir/Makefile
config.status: creating drivers/lirc_dev/Makefile
config.status: creating drivers/lirc_gpio/Makefile
config.status: creating drivers/lirc_i2c/Makefile
config.status: creating drivers/lirc_igorplugusb/Makefile
config.status: creating drivers/lirc_ttusbir/Makefile
config.status: creating drivers/lirc_imon/Makefile
config.status: creating drivers/lirc_it87/Makefile
config.status: creating drivers/lirc_mceusb/Makefile
config.status: creating drivers/lirc_mceusb2/Makefile
config.status: creating drivers/lirc_parallel/Makefile
config.status: creating drivers/lirc_sasem/Makefile
config.status: creating drivers/lirc_serial/Makefile
config.status: creating drivers/lirc_sir/Makefile
config.status: creating drivers/lirc_streamzap/Makefile
config.status: creating daemons/Makefile
config.status: creating tools/Makefile
config.status: creating doc/Makefile
config.status: creating doc/man/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands

You will have to use the lirc_mceusb2 kernel module.

Now enter 'make' and 'make install' to compile and install the package.

Making install in drivers
make[1]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers'
Making install in lirc_dev
make[2]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
cd ../.. && \
          /bin/sh /usr/src/lirc-0.8.2+lmce/missing --run automake-1.6 --gnu  drivers/lirc_dev/Makefile
/usr/src/lirc-0.8.2+lmce/missing: line 46: automake-1.6: command not found
WARNING: `automake-1.6' is missing on your system.  You should only need it if
         you modified `Makefile.am', `acinclude.m4' or `configure.in'.
         You might want to install the `Automake' and `Perl' packages.
         Grab them from any GNU archive site.
touch: cannot touch `./drivers/lirc_gpio/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_it87/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_mceusb/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_igorplugusb/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_sasem/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_parallel/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_bt829/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_imon/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_ttusbir/Makefile.in': Permission denied
touch: cannot touch `./drivers/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_atiusb/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_streamzap/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_serial/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_i2c/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_dev/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_sir/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_mceusb2/Makefile.in': Permission denied
touch: cannot touch `./drivers/lirc_cmdir/Makefile.in': Permission denied
touch: cannot touch `./tools/Makefile.in': Permission denied
touch: cannot touch `./Makefile.in': Permission denied
touch: cannot touch `./doc/Makefile.in': Permission denied
touch: cannot touch `./doc/man/Makefile.in': Permission denied
touch: cannot touch `./daemons/Makefile.in': Permission denied
mv Makefile Makefile.automake
mv: cannot move `Makefile' to `Makefile.automake': Permission denied
make[2]: *** [lirc_dev.o] Error 1
make[2]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers'
make: *** [install-recursive] Error 1

Before starting the whole procedure I would suggest you sudo yourself;

Code: [Select]
sudo su - <return>

After typing the above line and hitting 'return' enter the password you created when installing your system from the LinuxMCE DVD. Now you should be able to do 'make install' etc.

Andrew

Andy Herron,
Convergent Home Technologies Ltd

My Blog; http://ellipticalcurve.com

Get RaspSqueeze-CEC or Raspbmc-CEC Wifi enabled for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

For Smart Home consulting advice;
@herron on Twitter, inquiries@ellipticalcurve.com via email or PM me here.

Get a Dianemo License: http://forum.linuxmce.org/index.php?topic=8880.msg100221#msg100221
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

cleardata

  • Regular Poster
  • **
  • Posts: 35
    • View Profile
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #35 on: April 03, 2009, 12:33:10 pm »
Thanks..

I got a bit different output this time.  But still ended in error...  here is my output:

Thoughts?

Code: [Select]
setup.sh written by Karsten Scheibler, 1999-JUN-28

If you have problems or questions please consult the mailing list
<http://lists.sourceforge.net/mailman/listinfo/lirc-list>

Configuration: .setup.config, executable shell script: configure.sh
Starting the generated shell script which will call configure with the right
parameters...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for mknod... /bin/mknod
checking for mkfifo... /usr/bin/mkfifo
checking for depmod... /sbin/depmod
checking for libusb-config... no
checking whether ln -s works... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking for ANSI C header files... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for gethostname... yes
checking for gettimeofday... yes
checking for mkfifo... yes
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtoul... yes
checking for snprintf... yes
checking for strsep... yes
checking for vsyslog... yes
checking for daemon... yes
checking for forkpty... no
checking for forkpty in -lutil... yes
checking vga.h usability... no
checking vga.h presence... no
checking for vga.h... no
checking for X... no
checking for getopt_long... yes
checking for mktemp... yes
checking for Linux kernel sources... /lib/modules/2.6.22-14-generic/build/
checking for which drivers can be installed on this system...
checking for caraca_init in -lcaraca_client... no
checking iguanaIR.h usability... no
checking iguanaIR.h presence... no
checking for iguanaIR.h... no
checking for ir_strerror in -lirman... no
checking for ir_strerror in -lirman_sw... no
checking portaudio.h usability... no
checking portaudio.h presence... no
checking for portaudio.h... no
checking alsa/asoundlib.h usability... no
checking alsa/asoundlib.h presence... no
checking for alsa/asoundlib.h... no
checking scsi/sg.h usability... yes
checking scsi/sg.h presence... yes
checking for scsi/sg.h... yes
checking linux/input.h usability... yes
checking linux/input.h presence... yes
checking for linux/input.h... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating drivers/Makefile
config.status: creating drivers/lirc_atiusb/Makefile
config.status: creating drivers/lirc_bt829/Makefile
config.status: creating drivers/lirc_cmdir/Makefile
config.status: creating drivers/lirc_dev/Makefile
config.status: creating drivers/lirc_gpio/Makefile
config.status: creating drivers/lirc_i2c/Makefile
config.status: creating drivers/lirc_igorplugusb/Makefile
config.status: creating drivers/lirc_ttusbir/Makefile
config.status: creating drivers/lirc_imon/Makefile
config.status: creating drivers/lirc_it87/Makefile
config.status: creating drivers/lirc_mceusb/Makefile
config.status: creating drivers/lirc_mceusb2/Makefile
config.status: creating drivers/lirc_parallel/Makefile
config.status: creating drivers/lirc_sasem/Makefile
config.status: creating drivers/lirc_serial/Makefile
config.status: creating drivers/lirc_sir/Makefile
config.status: creating drivers/lirc_streamzap/Makefile
config.status: creating daemons/Makefile
config.status: creating tools/Makefile
config.status: creating doc/Makefile
config.status: creating doc/man/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands

You will have to use the lirc_mceusb2 kernel module.

Now enter 'make' and 'make install' to compile and install the package.

Making install in drivers
make[1]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers'
Making install in lirc_dev
make[2]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
cd ../.. && \
          /bin/sh /usr/src/lirc-0.8.2+lmce/missing --run automake-1.6 --gnu  drivers/lirc_dev/Makefile
/usr/src/lirc-0.8.2+lmce/missing: line 46: automake-1.6: command not found
WARNING: `automake-1.6' is missing on your system.  You should only need it if
         you modified `Makefile.am', `acinclude.m4' or `configure.in'.
         You might want to install the `Automake' and `Perl' packages.
         Grab them from any GNU archive site.
cd ../.. && /bin/sh ./config.status drivers/lirc_dev/Makefile depfiles
config.status: creating drivers/lirc_dev/Makefile
config.status: executing depfiles commands
make[2]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
make[2]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
mv Makefile Makefile.automake
cp ../Makefile.kernel Makefile
make -C /lib/modules/2.6.22-14-generic/build/ SUBDIRS=/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev modules \
                KBUILD_VERBOSE=1
make[3]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (            \
        echo;                                                           \
        echo "  ERROR: Kernel configuration is invalid.";               \
        echo "         include/linux/autoconf.h or include/config/auto.conf are missing."; \
        echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";     \
        echo;                                                           \
        /bin/false)
mkdir -p /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/.tmp_versions
rm -f /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/.tmp_versions/*
make -f scripts/Makefile.build obj=/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev
  gcc -m32 -Wp,-MD,/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/.lirc_dev.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DIRCTL_DEV_MAJOR=61 -DEXPORT_SYMTAB -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/../.. -I/lib/modules/2.6.22-14-generic/build//include/ -I/lib/modules/2.6.22-14-generic/build//drivers/media/video/  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(lirc_dev)"  -D"KBUILD_MODNAME=KBUILD_STR(lirc_dev)" -c -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/.tmp_lirc_dev.o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.c
  Building modules, stage 2.
make -f /usr/src/linux-headers-2.6.22-14-generic/scripts/Makefile.modpost
  scripts/mod/modpost -m -a -i /usr/src/linux-headers-2.6.22-14-generic/Module.symvers -I /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/Module.symvers -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/Module.symvers -w
  gcc -m32 -Wp,-MD,/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/.lirc_dev.mod.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign    -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(lirc_dev.mod)"  -D"KBUILD_MODNAME=KBUILD_STR(lirc_dev)" -DMODULE -c -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.mod.o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.mod.c
  ld -m elf_i386 -m elf_i386 -r -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.ko /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.mod.o
make[3]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
mv Makefile.automake Makefile
make[3]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
test -e /dev/lirc || (/bin/sh ../../mkinstalldirs /dev && /bin/mknod /dev/lirc c 61 0)
/bin/sh ../../mkinstalldirs /lib/modules/2.6.22-14-generic/misc
 /usr/bin/install -c -m 644 lirc_dev.ko /lib/modules/2.6.22-14-generic/misc/lirc_dev.ko
/sbin/depmod -a
make[3]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
make[2]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
Making install in lirc_mceusb2
make[2]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2'
cd ../.. && /bin/sh ./config.status drivers/lirc_mceusb2/Makefile depfiles
config.status: creating drivers/lirc_mceusb2/Makefile
config.status: executing depfiles commands
make[2]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2'
make[2]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2'
mv Makefile Makefile.automake
cp ../Makefile.kernel Makefile
make -C /lib/modules/2.6.22-14-generic/build/ SUBDIRS=/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2 modules \
                KBUILD_VERBOSE=1
make[3]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (            \
        echo;                                                           \
        echo "  ERROR: Kernel configuration is invalid.";               \
        echo "         include/linux/autoconf.h or include/config/auto.conf are missing."; \
        echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";     \
        echo;                                                           \
        /bin/false)
mkdir -p /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.tmp_versions
rm -f /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.tmp_versions/*
make -f scripts/Makefile.build obj=/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2
  gcc -m32 -Wp,-MD,/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.lirc_mceusb2.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DIRCTL_DEV_MAJOR=61 -DEXPORT_SYMTAB -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/../.. -I/lib/modules/2.6.22-14-generic/build//include/ -I/lib/modules/2.6.22-14-generic/build//drivers/media/video/  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(lirc_mceusb2)"  -D"KBUILD_MODNAME=KBUILD_STR(lirc_mceusb2)" -c -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.tmp_lirc_mceusb2.o /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/lirc_mceusb2.c
/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/lirc_mceusb2.c:140: error: ‘VENDOR_PINNACLE’ undeclared here (not in a function)
make[4]: *** [/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/lirc_mceusb2.o] Error 1
make[3]: *** [_module_/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2] Error 2
make[3]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
make[2]: *** [lirc_mceusb2.o] Error 2
make[2]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers'
make: *** [install-recursive] Error 1

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4540
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #36 on: April 03, 2009, 12:51:32 pm »
Thanks..

I got a bit different output this time.  But still ended in error...  here is my output:

Thoughts?

Code: [Select]
setup.sh written by Karsten Scheibler, 1999-JUN-28

If you have problems or questions please consult the mailing list
<http://lists.sourceforge.net/mailman/listinfo/lirc-list>

Configuration: .setup.config, executable shell script: configure.sh
Starting the generated shell script which will call configure with the right
parameters...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for mknod... /bin/mknod
checking for mkfifo... /usr/bin/mkfifo
checking for depmod... /sbin/depmod
checking for libusb-config... no
checking whether ln -s works... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking for ANSI C header files... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for gethostname... yes
checking for gettimeofday... yes
checking for mkfifo... yes
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtoul... yes
checking for snprintf... yes
checking for strsep... yes
checking for vsyslog... yes
checking for daemon... yes
checking for forkpty... no
checking for forkpty in -lutil... yes
checking vga.h usability... no
checking vga.h presence... no
checking for vga.h... no
checking for X... no
checking for getopt_long... yes
checking for mktemp... yes
checking for Linux kernel sources... /lib/modules/2.6.22-14-generic/build/
checking for which drivers can be installed on this system...
checking for caraca_init in -lcaraca_client... no
checking iguanaIR.h usability... no
checking iguanaIR.h presence... no
checking for iguanaIR.h... no
checking for ir_strerror in -lirman... no
checking for ir_strerror in -lirman_sw... no
checking portaudio.h usability... no
checking portaudio.h presence... no
checking for portaudio.h... no
checking alsa/asoundlib.h usability... no
checking alsa/asoundlib.h presence... no
checking for alsa/asoundlib.h... no
checking scsi/sg.h usability... yes
checking scsi/sg.h presence... yes
checking for scsi/sg.h... yes
checking linux/input.h usability... yes
checking linux/input.h presence... yes
checking for linux/input.h... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating drivers/Makefile
config.status: creating drivers/lirc_atiusb/Makefile
config.status: creating drivers/lirc_bt829/Makefile
config.status: creating drivers/lirc_cmdir/Makefile
config.status: creating drivers/lirc_dev/Makefile
config.status: creating drivers/lirc_gpio/Makefile
config.status: creating drivers/lirc_i2c/Makefile
config.status: creating drivers/lirc_igorplugusb/Makefile
config.status: creating drivers/lirc_ttusbir/Makefile
config.status: creating drivers/lirc_imon/Makefile
config.status: creating drivers/lirc_it87/Makefile
config.status: creating drivers/lirc_mceusb/Makefile
config.status: creating drivers/lirc_mceusb2/Makefile
config.status: creating drivers/lirc_parallel/Makefile
config.status: creating drivers/lirc_sasem/Makefile
config.status: creating drivers/lirc_serial/Makefile
config.status: creating drivers/lirc_sir/Makefile
config.status: creating drivers/lirc_streamzap/Makefile
config.status: creating daemons/Makefile
config.status: creating tools/Makefile
config.status: creating doc/Makefile
config.status: creating doc/man/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands

You will have to use the lirc_mceusb2 kernel module.

Now enter 'make' and 'make install' to compile and install the package.

Making install in drivers
make[1]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers'
Making install in lirc_dev
make[2]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
cd ../.. && \
          /bin/sh /usr/src/lirc-0.8.2+lmce/missing --run automake-1.6 --gnu  drivers/lirc_dev/Makefile
/usr/src/lirc-0.8.2+lmce/missing: line 46: automake-1.6: command not found
WARNING: `automake-1.6' is missing on your system.  You should only need it if
         you modified `Makefile.am', `acinclude.m4' or `configure.in'.
         You might want to install the `Automake' and `Perl' packages.
         Grab them from any GNU archive site.
cd ../.. && /bin/sh ./config.status drivers/lirc_dev/Makefile depfiles
config.status: creating drivers/lirc_dev/Makefile
config.status: executing depfiles commands
make[2]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
make[2]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
mv Makefile Makefile.automake
cp ../Makefile.kernel Makefile
make -C /lib/modules/2.6.22-14-generic/build/ SUBDIRS=/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev modules \
                KBUILD_VERBOSE=1
make[3]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (            \
        echo;                                                           \
        echo "  ERROR: Kernel configuration is invalid.";               \
        echo "         include/linux/autoconf.h or include/config/auto.conf are missing."; \
        echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";     \
        echo;                                                           \
        /bin/false)
mkdir -p /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/.tmp_versions
rm -f /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/.tmp_versions/*
make -f scripts/Makefile.build obj=/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev
  gcc -m32 -Wp,-MD,/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/.lirc_dev.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DIRCTL_DEV_MAJOR=61 -DEXPORT_SYMTAB -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/../.. -I/lib/modules/2.6.22-14-generic/build//include/ -I/lib/modules/2.6.22-14-generic/build//drivers/media/video/  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(lirc_dev)"  -D"KBUILD_MODNAME=KBUILD_STR(lirc_dev)" -c -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/.tmp_lirc_dev.o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.c
  Building modules, stage 2.
make -f /usr/src/linux-headers-2.6.22-14-generic/scripts/Makefile.modpost
  scripts/mod/modpost -m -a -i /usr/src/linux-headers-2.6.22-14-generic/Module.symvers -I /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/Module.symvers -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/Module.symvers -w
  gcc -m32 -Wp,-MD,/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/.lirc_dev.mod.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign    -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(lirc_dev.mod)"  -D"KBUILD_MODNAME=KBUILD_STR(lirc_dev)" -DMODULE -c -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.mod.o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.mod.c
  ld -m elf_i386 -m elf_i386 -r -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.ko /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.o /usr/src/lirc-0.8.2+lmce/drivers/lirc_dev/lirc_dev.mod.o
make[3]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
mv Makefile.automake Makefile
make[3]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
test -e /dev/lirc || (/bin/sh ../../mkinstalldirs /dev && /bin/mknod /dev/lirc c 61 0)
/bin/sh ../../mkinstalldirs /lib/modules/2.6.22-14-generic/misc
 /usr/bin/install -c -m 644 lirc_dev.ko /lib/modules/2.6.22-14-generic/misc/lirc_dev.ko
/sbin/depmod -a
make[3]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
make[2]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_dev'
Making install in lirc_mceusb2
make[2]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2'
cd ../.. && /bin/sh ./config.status drivers/lirc_mceusb2/Makefile depfiles
config.status: creating drivers/lirc_mceusb2/Makefile
config.status: executing depfiles commands
make[2]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2'
make[2]: Entering directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2'
mv Makefile Makefile.automake
cp ../Makefile.kernel Makefile
make -C /lib/modules/2.6.22-14-generic/build/ SUBDIRS=/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2 modules \
                KBUILD_VERBOSE=1
make[3]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
test -e include/linux/autoconf.h -a -e include/config/auto.conf || (            \
        echo;                                                           \
        echo "  ERROR: Kernel configuration is invalid.";               \
        echo "         include/linux/autoconf.h or include/config/auto.conf are missing."; \
        echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";     \
        echo;                                                           \
        /bin/false)
mkdir -p /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.tmp_versions
rm -f /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.tmp_versions/*
make -f scripts/Makefile.build obj=/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2
  gcc -m32 -Wp,-MD,/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.lirc_mceusb2.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DIRCTL_DEV_MAJOR=61 -DEXPORT_SYMTAB -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/../.. -I/lib/modules/2.6.22-14-generic/build//include/ -I/lib/modules/2.6.22-14-generic/build//drivers/media/video/  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(lirc_mceusb2)"  -D"KBUILD_MODNAME=KBUILD_STR(lirc_mceusb2)" -c -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.tmp_lirc_mceusb2.o /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/lirc_mceusb2.c
/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/lirc_mceusb2.c:140: error: ‘VENDOR_PINNACLE’ undeclared here (not in a function)
make[4]: *** [/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/lirc_mceusb2.o] Error 1
make[3]: *** [_module_/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2] Error 2
make[3]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
make[2]: *** [lirc_mceusb2.o] Error 2
make[2]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/usr/src/lirc-0.8.2+lmce/drivers'
make: *** [install-recursive] Error 1

Looks like you have an error in the changes you made to the lirc_mceusb2.c file;
Code: [Select]
mkdir -p /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.tmp_versions
rm -f /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.tmp_versions/*
make -f scripts/Makefile.build obj=/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2
  gcc -m32 -Wp,-MD,/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.lirc_mceusb2.o.d  -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.3/include -D__KERNEL__ -Iinclude  -include include/linux/autoconf.h -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -freg-struct-return -mpreferred-stack-boundary=2  -march=i586 -mtune=generic -ffreestanding -maccumulate-outgoing-args -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -Iinclude/asm-i386/mach-default -fomit-frame-pointer -g  -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -DIRCTL_DEV_MAJOR=61 -DEXPORT_SYMTAB -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/../.. -I/lib/modules/2.6.22-14-generic/build//include/ -I/lib/modules/2.6.22-14-generic/build//drivers/media/video/  -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(lirc_mceusb2)"  -D"KBUILD_MODNAME=KBUILD_STR(lirc_mceusb2)" -c -o /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/.tmp_lirc_mceusb2.o /usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/lirc_mceusb2.c
/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/lirc_mceusb2.c:140: error: ‘VENDOR_PINNACLE’ undeclared here (not in a function)
make[4]: *** [/usr/src/lirc-0.8.2+lmce/drivers/lirc_mceusb2/lirc_mceusb2.o] Error 1

See the error;
Code: [Select]
error: ‘VENDOR_PINNACLE’ undeclared here (not in a function)

Andrew


Andy Herron,
Convergent Home Technologies Ltd

My Blog; http://ellipticalcurve.com

Get RaspSqueeze-CEC or Raspbmc-CEC Wifi enabled for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

For Smart Home consulting advice;
@herron on Twitter, inquiries@ellipticalcurve.com via email or PM me here.

Get a Dianemo License: http://forum.linuxmce.org/index.php?topic=8880.msg100221#msg100221
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

cleardata

  • Regular Poster
  • **
  • Posts: 35
    • View Profile
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #37 on: April 03, 2009, 10:06:08 pm »
Shoot!  I didn't see that...  I'll have to check it out.  Thanks for pointing it out for me.


cleardata

  • Regular Poster
  • **
  • Posts: 35
    • View Profile
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #38 on: April 04, 2009, 03:18:32 am »
Ok, this time it built correctly.  How can I check that it is installed correctly?  it looked like it was installing...  Is there a test I can run to determine this?

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4540
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #39 on: April 04, 2009, 08:47:18 am »
Ok, this time it built correctly.  How can I check that it is installed correctly?  it looked like it was installing...  Is there a test I can run to determine this?

Well...the best test is to see if your Tranceiver now works! It should do. Reboot and give it a try.

Andrew
Andy Herron,
Convergent Home Technologies Ltd

My Blog; http://ellipticalcurve.com

Get RaspSqueeze-CEC or Raspbmc-CEC Wifi enabled for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

For Smart Home consulting advice;
@herron on Twitter, inquiries@ellipticalcurve.com via email or PM me here.

Get a Dianemo License: http://forum.linuxmce.org/index.php?topic=8880.msg100221#msg100221
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

cleardata

  • Regular Poster
  • **
  • Posts: 35
    • View Profile
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #40 on: April 04, 2009, 07:17:28 pm »
Did that, and it didn't work.  It detects it.  But still comes up with the message that a device did not start correctly.  I followed all the original instructions as well.  Any thoughts? 

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4540
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #41 on: April 04, 2009, 08:04:52 pm »
Did that, and it didn't work.  It detects it.  But still comes up with the message that a device did not start correctly.  I followed all the original instructions as well.  Any thoughts? 

Nope...apart from wait until we have this in a future release.

Andrew
Andy Herron,
Convergent Home Technologies Ltd

My Blog; http://ellipticalcurve.com

Get RaspSqueeze-CEC or Raspbmc-CEC Wifi enabled for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

For Smart Home consulting advice;
@herron on Twitter, inquiries@ellipticalcurve.com via email or PM me here.

Get a Dianemo License: http://forum.linuxmce.org/index.php?topic=8880.msg100221#msg100221
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

cleardata

  • Regular Poster
  • **
  • Posts: 35
    • View Profile
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #42 on: April 04, 2009, 08:41:23 pm »
Ok, thanks.  I really appreciate all the help you have provided me.  I think I will look through all the compatible Remotes and purchase one. 

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4540
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #43 on: April 04, 2009, 09:45:44 pm »
Ok, thanks.  I really appreciate all the help you have provided me.  I think I will look through all the compatible Remotes and purchase one. 

Either get an USBUIRT Transceiver or a MS Microsoft Tranceiver...your exisitng remote will definitely work with any of these.

Andrew
Andy Herron,
Convergent Home Technologies Ltd

My Blog; http://ellipticalcurve.com

Get RaspSqueeze-CEC or Raspbmc-CEC Wifi enabled for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

For Smart Home consulting advice;
@herron on Twitter, inquiries@ellipticalcurve.com via email or PM me here.

Get a Dianemo License: http://forum.linuxmce.org/index.php?topic=8880.msg100221#msg100221
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

cleardata

  • Regular Poster
  • **
  • Posts: 35
    • View Profile
Re: Help... ATI Radeon HD 2400 - Machine Freezes
« Reply #44 on: April 05, 2009, 12:09:58 am »
Good news!  It is FIXED!!!  Suggestion for the Wiki...

Edit the lirc_mceusb2.c file again...

Add the following to the #Define section
Code: [Select]
#define VENDOR_PINNACLE         0x2304
go down through the file and look for
Code: [Select]
case 0x8F:
Add the following above it
Code: [Select]
case 0x90:
rebuild and it should work.