Author Topic: DVD Playback freezes  (Read 1360 times)

Marper

  • Guru
  • ****
  • Posts: 183
    • View Profile
DVD Playback freezes
« on: December 14, 2008, 07:06:53 am »
Hope to get some direction.

When I use my MD in my theatre and play a dvd from the core, throughout the movie it freezes.  This happens to every movie and many times within a movie.  From another thread, I saw a post that indicated to run dmseg and post.  I'm hoping someone can lead me down the right path.  Also, when setting up this MD, it displays AMD64 in WebAdmin when it's a i386, Could this be the problem. 


[   30.284261] raid5: using function: generic_sse (8065.000 MB/sec)
[   30.352139] raid6: int64x1   1839 MB/s
[   30.420069] raid6: int64x2   2585 MB/s
[   30.488013] raid6: int64x4   2568 MB/s
[   30.555950] raid6: int64x8   1649 MB/s
[   30.623873] raid6: sse2x1    3488 MB/s
[   30.691824] raid6: sse2x2    4085 MB/s
[   30.759754] raid6: sse2x4    6666 MB/s
[   30.759829] raid6: using algorithm sse2x4 (6666 MB/s)
[   30.759909] md: raid6 personality registered for level 6
[   30.759988] md: raid5 personality registered for level 5
[   30.760066] md: raid4 personality registered for level 4
[   30.773523] md: raid10 personality registered for level 10
[   31.083677] usbcore: registered new interface driver usbfs
[   31.083778] usbcore: registered new interface driver hub
[   31.083873] usbcore: registered new device driver usb
[   31.084461] USB Universal Host Controller Interface driver v3.0
[   31.084636] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[   31.084795] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   31.084798] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   31.084985] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   31.085111] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b880
[   31.085285] usb usb1: configuration #1 chosen from 1 choice
[   31.085384] hub 1-0:1.0: USB hub found
[   31.085462] hub 1-0:1.0: 2 ports detected
[   31.111714] SCSI subsystem initialized
[   31.115362] libata version 2.21 loaded.
[   31.187800] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 17 (level, low) -> IRQ 17
[   31.187961] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   31.187964] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   31.188157] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   31.188284] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bc00
[   31.188641] usb usb2: configuration #1 chosen from 1 choice
[   31.188839] hub 2-0:1.0: USB hub found
[   31.188917] hub 2-0:1.0: 2 ports detected
[   31.292050] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   31.292204] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   31.292206] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   31.292402] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   31.292525] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
[   31.292886] usb usb3: configuration #1 chosen from 1 choice
[   31.293092] hub 3-0:1.0: USB hub found
[   31.293169] hub 3-0:1.0: 2 ports detected
[   31.396496] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[   31.396648] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   31.396651] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   31.396856] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   31.396979] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000c080
[   31.397361] usb usb4: configuration #1 chosen from 1 choice
[   31.397575] hub 4-0:1.0: USB hub found
[   31.397652] hub 4-0:1.0: 2 ports detected
[   31.502652] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[   31.503308] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   31.503314] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   31.503437] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   31.503569] ehci_hcd 0000:00:1d.7: debug port 1
[   31.503649] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   31.503656] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdcfffc00
[   31.532611] usb 2-1: new low speed USB device using uhci_hcd and address 2
[   31.532720] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   31.532923] usb usb5: configuration #1 chosen from 1 choice
[   31.533023] hub 5-0:1.0: USB hub found
[   31.533102] hub 5-0:1.0: 8 ports detected
[   31.637797] ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 19 (level, low) -> IRQ 19
[   31.691090] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[dfedf800-dfedffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   31.696262] r8169 Gigabit Ethernet driver 2.2LK loaded
[   31.696364] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   31.696537] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   31.696730] eth0: RTL8168b/8111b at 0xffffc20000ab4000, 00:18:f3:d3:30:51, XID 38000000 IRQ 16
[   31.698169] ata_piix 0000:00:1f.1: version 2.11
[   31.698185] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[   31.698370] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   31.698486] scsi0 : ata_piix
[   31.698596] scsi1 : ata_piix
[   31.698758] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
[   31.698871] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
[   32.037104] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[   32.037437] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 17 (level, low) -> IRQ 17
[   32.037611] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   32.037639] scsi2 : ata_piix
[   32.037754] scsi3 : ata_piix
[   32.037851] ata3: SATA max UDMA/133 cmd 0x000000000001cc00 ctl 0x000000000001c882 bmdma 0x000000000001c400 irq 17
[   32.037963] ata4: SATA max UDMA/133 cmd 0x000000000001c800 ctl 0x000000000001c482 bmdma 0x000000000001c408 irq 17
[   32.082379] usb 2-1: new low speed USB device using uhci_hcd and address 3
[   32.265430] usb 2-1: configuration #1 chosen from 1 choice
[   32.283338] usbcore: registered new interface driver hiddev
[   32.308879] input: Gyration Gyration RF Technology Receiver as /class/input/input1
[   32.309120] input,hiddev96: USB HID v1.10 Keyboard [Gyration Gyration RF Technology Receiver] on usb-0000:00:1d.1-1
[   32.335832] input: Gyration Gyration RF Technology Receiver as /class/input/input2
[   32.336171] input,hiddev97: USB HID v1.20 Mouse [Gyration Gyration RF Technology Receiver] on usb-0000:00:1d.1-1
[   32.336474] usbcore: registered new interface driver usbhid
[   32.336555] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   32.528230] ata3.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100
[   32.717018] ata3.00: configured for UDMA/100
[   32.885532] scsi 2:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1L   BL05 PQ: 0 ANSI: 5
[   32.894791] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[   32.894906] Uniform CD-ROM driver Revision: 3.20
[   32.895128] sr 2:0:0:0: Attached scsi CD-ROM sr0
[   32.897751] sr 2:0:0:0: Attached scsi generic sg0 type 5
[   32.974224] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000fe32ec]
[   32.979496] NET: Registered protocol family 17
[   32.983692] r8169: eth0: link down
[   32.983773] r8169: eth0: link down
[   34.967251] r8169: eth0: link up
[   53.610623] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   53.624373] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   53.628898] intel_rng: FWH not detected
[   53.700133] iTCO_vendor_support: vendor-support=0
[   53.715079] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   53.715606] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[   53.716051] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   55.094706] nvidia: module license 'NVIDIA' taints kernel.
[   55.375349] input: PC Speaker as /class/input/input3
[   55.378422] ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 17 (level, low) -> IRQ 17
[   55.378648] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
[   58.038874] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
[   58.039496] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   65.152727] NET: Registered protocol family 10
[   65.152821] lo: Disabled Privacy Extensions
[   69.679113] No dock devices found.
[   69.858589] input: Power Button (FF) as /class/input/input4
[   69.858607] ACPI: Power Button (FF) [PWRF]
[   69.858684] input: Power Button (CM) as /class/input/input5
[   69.858695] ACPI: Power Button (CM) [PWRB]
[   70.603964] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
[   74.327091] lp: driver loaded but no devices found
[   74.378079] ppdev: user-space parallel port driver
[   75.345426] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   75.584331] eth0: no IPv6 routers present
[   77.053197] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   77.054949] NFSD: starting 90-second grace period
[   83.728302] Bluetooth: Core ver 2.11
[   83.728370] NET: Registered protocol family 31
[   83.728373] Bluetooth: HCI device and connection manager initialized
[   83.728378] Bluetooth: HCI socket layer initialized
[   83.777347] Bluetooth: L2CAP ver 2.8
[   83.777353] Bluetooth: L2CAP socket layer initialized
[   83.788863] Bluetooth: RFCOMM socket layer initialized
[   83.788887] Bluetooth: RFCOMM TTY layer initialized
[   83.788890] Bluetooth: RFCOMM ver 1.8
[  126.127392] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[  126.127401] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[  126.130403] ide0: I/O resource 0x3F6-0x3F6 not free.
[  126.130411] ide0: ports already in use, skipping probe
[  126.130415] ide1: I/O resource 0x376-0x376 not free.
[  126.130418] ide1: ports already in use, skipping probe
[  134.107647] udf: no version for "struct_module" found: kernel tainted.
[  134.547389] end_request: I/O error, dev sr0, sector 9165692
[  134.759330] end_request: I/O error, dev sr0, sector 9165688
[  134.779740] attempt to access beyond end of device
[  134.779749] sr0: rw=0, want=9166724, limit=9166720
[  134.893032] end_request: I/O error, dev sr0, sector 9165696
[  135.116996] end_request: I/O error, dev sr0, sector 9165684
[  135.327554] end_request: I/O error, dev sr0, sector 9165092
[  135.538898] end_request: I/O error, dev sr0, sector 9165084
[  135.794971] end_request: I/O error, dev sr0, sector 7521408
[  136.164701] end_request: I/O error, dev sr0, sector 7521400
[  136.396878] end_request: I/O error, dev sr0, sector 7520152
[  136.582438] end_request: I/O error, dev sr0, sector 7520808
[  136.841462] end_request: I/O error, dev sr0, sector 7520800
[  136.894311] attempt to access beyond end of device
[  136.894321] sr0: rw=0, want=9166724, limit=9166720
[  137.043033] end_request: I/O error, dev sr0, sector 7521408
[  137.232791] end_request: I/O error, dev sr0, sector 7521400
[  137.422919] end_request: I/O error, dev sr0, sector 7520808
[  137.632590] end_request: I/O error, dev sr0, sector 7520800
[  137.938679] UDF-fs: Partition marked readonly; forcing readonly mount
[  137.974994] UDF-fs INFO UDF 0.9.9.1 (2007/01/03) Mounting volume 'NATIONAL_LAMPOONS_CHRISTMAS_VA', timestamp 2003/07/29 13:02 (1e20)
[ 1631.531119] end_request: I/O error, dev sr0, sector 9165692
[ 1631.746905] end_request: I/O error, dev sr0, sector 9165688
[ 1631.767820] attempt to access beyond end of device
[ 1631.767828] sr0: rw=0, want=9166724, limit=9166720
[ 1631.882887] end_request: I/O error, dev sr0, sector 9165696
[ 1632.109897] end_request: I/O error, dev sr0, sector 9165684
[ 1632.323232] end_request: I/O error, dev sr0, sector 9165092
[ 1632.536539] end_request: I/O error, dev sr0, sector 9165084
[ 1632.795187] end_request: I/O error, dev sr0, sector 7521408
[ 1633.151564] end_request: I/O error, dev sr0, sector 7521400
[ 1633.385939] end_request: I/O error, dev sr0, sector 7520152
[ 1633.589782] end_request: I/O error, dev sr0, sector 7520808
[ 1633.851376] end_request: I/O error, dev sr0, sector 7520800
[ 1633.904756] attempt to access beyond end of device
[ 1633.904765] sr0: rw=0, want=9166724, limit=9166720
[ 1634.055038] end_request: I/O error, dev sr0, sector 7521408
[ 1634.247212] end_request: I/O error, dev sr0, sector 7521400
[ 1634.439422] end_request: I/O error, dev sr0, sector 7520808
[ 1634.651089] end_request: I/O error, dev sr0, sector 7520800
[ 1634.926710] UDF-fs: Partition marked readonly; forcing readonly mount
[ 1634.952469] UDF-fs INFO UDF 0.9.9.1 (2007/01/03) Mounting volume 'NATIONAL_LAMPOONS_CHRISTMAS_VA', timestamp 2003/07/29 13:02 (1e20)
[ 2188.491620] Xine_Player[9083]: segfault at 0000000000000060 rip 00002aaaae171b9e rsp 00007fffe57ca9f0 error 4
[ 2204.263464] end_request: I/O error, dev sr0, sector 9165692
[ 2204.478603] end_request: I/O error, dev sr0, sector 9165688
[ 2204.499469] attempt to access beyond end of device
[ 2204.499477] sr0: rw=0, want=9166724, limit=9166720
[ 2204.614245] end_request: I/O error, dev sr0, sector 9165696
[ 2204.840761] end_request: I/O error, dev sr0, sector 9165684
[ 2205.053412] end_request: I/O error, dev sr0, sector 9165092
[ 2205.266491] end_request: I/O error, dev sr0, sector 9165084
[ 2205.541075] end_request: I/O error, dev sr0, sector 7521408
[ 2205.896979] end_request: I/O error, dev sr0, sector 7521400
[ 2206.131101] end_request: I/O error, dev sr0, sector 7520152
[ 2206.318404] end_request: I/O error, dev sr0, sector 7520808
[ 2206.579648] end_request: I/O error, dev sr0, sector 7520800
[ 2206.632847] attempt to access beyond end of device
[ 2206.632854] sr0: rw=0, want=9166724, limit=9166720
[ 2206.782539] end_request: I/O error, dev sr0, sector 7521408
[ 2206.973677] end_request: I/O error, dev sr0, sector 7521400
[ 2207.165218] end_request: I/O error, dev sr0, sector 7520808
[ 2207.376546] end_request: I/O error, dev sr0, sector 7520800
[ 2207.668011] UDF-fs: Partition marked readonly; forcing readonly mount
[ 2207.693694] UDF-fs INFO UDF 0.9.9.1 (2007/01/03) Mounting volume 'NATIONAL_LAMPOONS_CHRISTMAS_VA', timestamp 2003/07/29 13:02 (1e20)
[ 2210.289224]  CIFS VFS: server not responding
[ 2210.289234]  CIFS VFS: No response for cmd 50 mid 25915
[ 2210.289248]  CIFS VFS: No response for cmd 50 mid 25916
[ 2214.229362]  CIFS VFS: No response for cmd 50 mid 25922
[ 2214.229383]  CIFS VFS: No response for cmd 50 mid 25917
[ 2214.229394]  CIFS VFS: No response for cmd 50 mid 25919
[ 2214.229401]  CIFS VFS: No response for cmd 50 mid 25920
[ 2214.229411]  CIFS VFS: No response for cmd 50 mid 25918
[ 2214.230203]  CIFS VFS: No response for cmd 50 mid 25921
[ 2214.230372]  CIFS VFS: No response for cmd 50 mid 25923
[ 2214.230536]  CIFS VFS: No response for cmd 50 mid 25924
root@moon36:~#                                                 

Zaerc

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 2256
  • Department of Redundancy Department.
    • View Profile
Re: DVD Playback freezes
« Reply #1 on: December 14, 2008, 07:31:18 am »
Looks like there is a problem with your DVD drive, it could be worn out or simply broken.
"Change is inevitable. Progress is optional."
-- Anonymous


Marper

  • Guru
  • ****
  • Posts: 183
    • View Profile
Re: DVD Playback freezes
« Reply #2 on: December 14, 2008, 05:32:09 pm »
Thanks.  I'll disconnect it to see if the errors continue.  One further question; When I run this command from my MD, is that reporting infromation from the Core?

Zaerc

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 2256
  • Department of Redundancy Department.
    • View Profile
Re: DVD Playback freezes
« Reply #3 on: December 14, 2008, 05:52:31 pm »
No, the dmesg command will only show you information of the local machine you are logged onto.
"Change is inevitable. Progress is optional."
-- Anonymous


Marper

  • Guru
  • ****
  • Posts: 183
    • View Profile
Re: DVD Playback freezes
« Reply #4 on: December 20, 2008, 05:39:09 pm »
Did not know that.  I will disconnect the dvd on the MD and play the dvd again to see if that helps.

Marper

  • Guru
  • ****
  • Posts: 183
    • View Profile
Re: DVD Playback freezes
« Reply #5 on: December 23, 2008, 06:45:57 am »
I've removed the DVD drive from the system.  Here is my config:

Core

ASUS M379
4Gb RAM
3 WD HDD WD500AAS - 500Gb ea
Anthlon 64 Processor

MD

ASUS Barbone
P5945G
Intel Dual Core
2Gb RAM
No HDD
Nvidia 7600
No Optical Drive
On-board Gb NIC

I've just configured the new Core and had some issues getting it up and running.  It's running fine at this time.  However, I continue to get skip and freeze on DVD Playback.  Have been working to resolve this for months and have not found any real solution.

Could it be the SATA Drives in the Core.

When I play DVD on Core - no skip/freeze
When I attach the MD to Core with cross-over cable - skip/freezes many times in a movie

Do you think I need more Memory on the MD

Marper

  • Guru
  • ****
  • Posts: 183
    • View Profile
Re: DVD Playback freezes
« Reply #6 on: December 23, 2008, 08:37:28 am »
So I've changed the UI from Alphablending to UI2.  I still get freezing on the system with DVD Playback.  I ran the DMesg again and here is what I got.  Now the system does not have a DVD or HDD it's just a PXE Boot MD.  So I'm wondering if I have a HDD in the Core as a problem:  Maybe someone can shed some light.


[   27.572164] input,hiddev97: USB HID v1.20 Mouse [Gyration Gyration RF Technology Receiver] on usb-0000:00:1d.1-1
[   27.572462] usbcore: registered new interface driver usbhid
[   27.572542] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   27.630866] NET: Registered protocol family 17
[   27.632716] r8169: eth0: link down
[   27.632797] r8169: eth0: link down
[   28.232340] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000fe32ec]
[   29.923225] r8169: eth0: link up
[   53.247563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   53.273075] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   53.308402] input: PC Speaker as /class/input/input3
[   53.340568] intel_rng: FWH not detected
[   53.392602] iTCO_vendor_support: vendor-support=0
[   53.412032] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   53.412176] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[   53.412306] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   54.615029] nvidia: module license 'NVIDIA' taints kernel.
[   54.869489] ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 17 (level, low) -> IRQ 17
[   54.869824] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
[   58.816422] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
[   58.817043] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   70.441621] NET: Registered protocol family 10
[   70.441703] lo: Disabled Privacy Extensions
[   74.625738] No dock devices found.
[   74.719691] input: Power Button (FF) as /class/input/input4
[   74.719709] ACPI: Power Button (FF) [PWRF]
[   74.719787] input: Power Button (CM) as /class/input/input5
[   74.719797] ACPI: Power Button (CM) [PWRB]
[   75.941054] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
[   80.570539] lp: driver loaded but no devices found
[   80.623401] ppdev: user-space parallel port driver
[   81.359751] eth0: no IPv6 routers present
[   83.149642] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   83.938369] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   83.944510] NFSD: starting 90-second grace period
[   92.312145] Bluetooth: Core ver 2.11
[   92.312282] NET: Registered protocol family 31
[   92.312286] Bluetooth: HCI device and connection manager initialized
[   92.312291] Bluetooth: HCI socket layer initialized
[   92.351229] Bluetooth: L2CAP ver 2.8
[   92.351234] Bluetooth: L2CAP socket layer initialized
[   92.393311] Bluetooth: RFCOMM socket layer initialized
[   92.393328] Bluetooth: RFCOMM TTY layer initialized
[   92.393331] Bluetooth: RFCOMM ver 1.8
[  119.444983]  CIFS VFS: cifs_mount failed w/return code = -11
[  864.794562]  CIFS VFS: server not responding
[  864.794573]  CIFS VFS: No response for cmd 50 mid 18766
[  864.794587]  CIFS VFS: No response to cmd 46 mid 18765
[  864.794592]  CIFS VFS: Send error in read = -11
[  864.794599]  CIFS VFS: No response for cmd 50 mid 18764
[  866.173327]  CIFS VFS: Send error in read = -9
root@moon30:~#                                                 

I've seen these errors when I had another system that had a bad HDD or DVDplayer, however I don't know if that is the case now or what.  If so, it will be the 7th set of HDD's I've gone through.  Any ideas or direction.

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4438
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: DVD Playback freezes
« Reply #7 on: December 28, 2008, 05:01:45 pm »
So I've changed the UI from Alphablending to UI2.  I still get freezing on the system with DVD Playback.  I ran the DMesg again and here is what I got.  Now the system does not have a DVD or HDD it's just a PXE Boot MD.  So I'm wondering if I have a HDD in the Core as a problem:  Maybe someone can shed some light.


[   27.572164] input,hiddev97: USB HID v1.20 Mouse [Gyration Gyration RF Technology Receiver] on usb-0000:00:1d.1-1
[   27.572462] usbcore: registered new interface driver usbhid
[   27.572542] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   27.630866] NET: Registered protocol family 17
[   27.632716] r8169: eth0: link down
[   27.632797] r8169: eth0: link down
[   28.232340] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000fe32ec]
[   29.923225] r8169: eth0: link up
[   53.247563] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   53.273075] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   53.308402] input: PC Speaker as /class/input/input3
[   53.340568] intel_rng: FWH not detected
[   53.392602] iTCO_vendor_support: vendor-support=0
[   53.412032] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   53.412176] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[   53.412306] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   54.615029] nvidia: module license 'NVIDIA' taints kernel.
[   54.869489] ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 17 (level, low) -> IRQ 17
[   54.869824] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
[   58.816422] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
[   58.817043] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   70.441621] NET: Registered protocol family 10
[   70.441703] lo: Disabled Privacy Extensions
[   74.625738] No dock devices found.
[   74.719691] input: Power Button (FF) as /class/input/input4
[   74.719709] ACPI: Power Button (FF) [PWRF]
[   74.719787] input: Power Button (CM) as /class/input/input5
[   74.719797] ACPI: Power Button (CM) [PWRB]
[   75.941054] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
[   80.570539] lp: driver loaded but no devices found
[   80.623401] ppdev: user-space parallel port driver
[   81.359751] eth0: no IPv6 routers present
[   83.149642] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   83.938369] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   83.944510] NFSD: starting 90-second grace period
[   92.312145] Bluetooth: Core ver 2.11
[   92.312282] NET: Registered protocol family 31
[   92.312286] Bluetooth: HCI device and connection manager initialized
[   92.312291] Bluetooth: HCI socket layer initialized
[   92.351229] Bluetooth: L2CAP ver 2.8
[   92.351234] Bluetooth: L2CAP socket layer initialized
[   92.393311] Bluetooth: RFCOMM socket layer initialized
[   92.393328] Bluetooth: RFCOMM TTY layer initialized
[   92.393331] Bluetooth: RFCOMM ver 1.8
[  119.444983]  CIFS VFS: cifs_mount failed w/return code = -11
[  864.794562]  CIFS VFS: server not responding
[  864.794573]  CIFS VFS: No response for cmd 50 mid 18766
[  864.794587]  CIFS VFS: No response to cmd 46 mid 18765
[  864.794592]  CIFS VFS: Send error in read = -11
[  864.794599]  CIFS VFS: No response for cmd 50 mid 18764
[  866.173327]  CIFS VFS: Send error in read = -9
root@moon30:~#                                                 

I've seen these errors when I had another system that had a bad HDD or DVDplayer, however I don't know if that is the case now or what.  If so, it will be the 7th set of HDD's I've gone through.  Any ideas or direction.

Hmmm... I would suggest getting yourself a cheap 4/8 port switch and connecting your Core's LAN side to the Switch... then connect your MD to another port on the switch. Now with the MD off delete the MD using Web Admin and then power the MD up and have your Core aut-detect it and then add it as you did before. Complete the AVwizard and the setup wizard etc and then try playing the ripped DVD from your Core again. Hopefully this should get rid of the lockups!

All the best

Andrew
Andy Herron,
Convergent Home Technologies Ltd
United Kingdom

Read My Blog; http://ellipticalcurve.com

Contact me for Smart Home consulting advice here;
@herron on Twitter, totallymaxed+consulting@gmail.com via email or PM me here.

Get a Dianemo S License: http://forum.linuxmce.org/index.php?topic=8880.0
iOS Orbiter: http://wiki.linuxmce.org/index.php/Dianemo_iOS_Orbiter
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

Sales & Info:
http://www.dianemo.co.uk