Author Topic: Tuner Card's not being detcted at install  (Read 3420 times)

wrotruck

  • Newbie
  • *
  • Posts: 11
    • View Profile
Tuner Card's not being detcted at install
« on: December 23, 2008, 03:03:18 pm »
Hello:

I have recently completed installing my Linux MCE Core.  I have put in 2 tuner cards but Sarah can't seem to find them and set them up.  One is a Happuage PVR-250 (Old card form a Sage TV build I did a couple years back) and a DViCO HDTV7 Dual Express.

Build looks like this:
Motherboard: ECS GeForce7050M-M
Proc: Sempron Processor LE-1250
Ram: Corsair TWINX 2GB PC-6400 DDR2 CL5
Additional NIC: D-Link DGE-530T (Love the fact that this guy will go full duplex)

My first thought was that the issue was issue was bad PCI Slots but the NIC is working in both standard PCIs.
Not sure if this matters or not but, I do not have any kind of antenna or cable attached to the cards.

Any thoughts or help would be appreciated. (Before anyone says it, I know I should have gone with a HDHomeRun but space is a premium and I didn't know it existed until after I made this purchase,)

Thanks...

-Wil

tkmedia

  • wants to work for LinuxMCE
  • **
  • Posts: 937
    • View Profile
    • LMCECompatible
Re: Tuner Card's not being detcted at install
« Reply #1 on: December 23, 2008, 06:58:18 pm »
The Pvr 250 should work just fine.


The Divco on the other hand, good luck.


Tim
My Setup http://wiki.linuxmce.org/index.php/User:Tkmedia

For LinuxMce compatible  systems and accessories
http://lmcecompatible.com/

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4445
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Tuner Card's not being detcted at install
« Reply #2 on: December 28, 2008, 04:48:51 pm »
Hello:

I have recently completed installing my Linux MCE Core.  I have put in 2 tuner cards but Sarah can't seem to find them and set them up.  One is a Happuage PVR-250 (Old card form a Sage TV build I did a couple years back) and a DViCO HDTV7 Dual Express.

Build looks like this:
Motherboard: ECS GeForce7050M-M
Proc: Sempron Processor LE-1250
Ram: Corsair TWINX 2GB PC-6400 DDR2 CL5
Additional NIC: D-Link DGE-530T (Love the fact that this guy will go full duplex)

My first thought was that the issue was issue was bad PCI Slots but the NIC is working in both standard PCIs.
Not sure if this matters or not but, I do not have any kind of antenna or cable attached to the cards.

Any thoughts or help would be appreciated. (Before anyone says it, I know I should have gone with a HDHomeRun but space is a premium and I didn't know it existed until after I made this purchase,)

Thanks...

-Wil

The pvr-250 should be auto-detected. We use these all the time for capturing analog sources so I know this to be the case... and of course many LinuxMCE users who use MythTV use them for the same purpose too.

If you are referring to the 'FusionHDTV Dual Digital 4' card then this can be made to work under the 0710 kernel... see here; http://www.linuxtv.org/wiki/index.php/DVB-T_PCI_Cards#DViCO. We have tested this card and even with the latest linuxtv drivers under the 2.6.22 Kernel you will not get a smooth ride.

Since I guess you are in North America the HDHomeRun would definitely be your best choice...

All the best

Andrew
Andy Herron,
Convergent Home Technologies Ltd
United Kingdom

Read My Blog; http://ellipticalcurve.com

Contact me for Smart Home consulting advice here;
@herron on Twitter, totallymaxed+consulting@gmail.com via email or PM me here.

Get a Dianemo S License: http://forum.linuxmce.org/index.php?topic=8880.0
iOS Orbiter: http://wiki.linuxmce.org/index.php/Dianemo_iOS_Orbiter
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

Sales & Info:
http://www.dianemo.co.uk

greenhornet

  • Veteran
  • ***
  • Posts: 59
    • View Profile
Re: Tuner Card's not being detcted at install
« Reply #3 on: December 28, 2008, 08:00:48 pm »
I'm having a similar problem with a PVR-150.  Other devices are auto detected, however not this card.  I have tried 2 identical PVR-150 cards so I am positive it's not the card.  I can "see" the card listed in the Kubuntu hardware devices list.  For those of us that are not getting an autodetected card, such as the supported Hauppauge cards, what can we do?  Most of the forum posts stop at "your card should be auto detected, good luck."

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4445
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Tuner Card's not being detcted at install
« Reply #4 on: December 28, 2008, 08:42:23 pm »
I'm having a similar problem with a PVR-150.  Other devices are auto detected, however not this card.  I have tried 2 identical PVR-150 cards so I am positive it's not the card.  I can "see" the card listed in the Kubuntu hardware devices list.  For those of us that are not getting an autodetected card, such as the supported Hauppauge cards, what can we do?  Most of the forum posts stop at "your card should be auto detected, good luck."

Go to Web Admin's Wizard Media Directors page and scroll to the Core or MD with the pvr-150/250 installed and you should see it listed for the machine its in.

Andrew
Andy Herron,
Convergent Home Technologies Ltd
United Kingdom

Read My Blog; http://ellipticalcurve.com

Contact me for Smart Home consulting advice here;
@herron on Twitter, totallymaxed+consulting@gmail.com via email or PM me here.

Get a Dianemo S License: http://forum.linuxmce.org/index.php?topic=8880.0
iOS Orbiter: http://wiki.linuxmce.org/index.php/Dianemo_iOS_Orbiter
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

Sales & Info:
http://www.dianemo.co.uk

indulis

  • Veteran
  • ***
  • Posts: 147
    • View Profile
Re: Tuner Card's not being detcted at install
« Reply #5 on: December 29, 2008, 01:01:35 am »

If you are referring to the 'FusionHDTV Dual Digital 4' card then this can be made to work under the 0710 kernel... see here; http://www.linuxtv.org/wiki/index.php/DVB-T_PCI_Cards#DViCO. We have tested this card and even with the latest linuxtv drivers under the 2.6.22 Kernel you will not get a smooth ride.


I agree with Andrew- I bought the DViCO dual digital 4 card (rev 2) and did not realise that it would have problems with the new drivers on the standard LMCE 710 kernel.  The same drivers work on later kernel versions brilliantly- I had to upgrade my kernel to get the card to work.  This was pretty involved so I would not recommend it.  You might be better off waiting until LMCE 810 is available and stable, as the DViCO tuner should work fine then.

If you have a DViCO rev 1 card then this should work fine on the standard LMCE kernel, the problem lies with the kernel support for the USB chips on the rev 2 tuner card.

This is one of the biggest problems with building a PVR using Linux- the manufacturers of tuner cards keep changing the designs on us!  Just when linux coders have written and debugged a driver for a tuner card, the manufacturers change the card (and don't tell anyone they have) or you can't buy it any more!


greenhornet

  • Veteran
  • ***
  • Posts: 59
    • View Profile
Re: Tuner Card's not being detcted at install
« Reply #6 on: December 29, 2008, 06:17:34 am »
totallymaxed - the card does not show up in the admin section you mentioned unless I add it.

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4445
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Tuner Card's not being detcted at install
« Reply #7 on: December 29, 2008, 09:52:32 am »

If you are referring to the 'FusionHDTV Dual Digital 4' card then this can be made to work under the 0710 kernel... see here; http://www.linuxtv.org/wiki/index.php/DVB-T_PCI_Cards#DViCO. We have tested this card and even with the latest linuxtv drivers under the 2.6.22 Kernel you will not get a smooth ride.


I agree with Andrew- I bought the DViCO dual digital 4 card (rev 2) and did not realise that it would have problems with the new drivers on the standard LMCE 710 kernel.  The same drivers work on later kernel versions brilliantly- I had to upgrade my kernel to get the card to work.  This was pretty involved so I would not recommend it.  You might be better off waiting until LMCE 810 is available and stable, as the DViCO tuner should work fine then.

If you have a DViCO rev 1 card then this should work fine on the standard LMCE kernel, the problem lies with the kernel support for the USB chips on the rev 2 tuner card.

This is one of the biggest problems with building a PVR using Linux- the manufacturers of tuner cards keep changing the designs on us!  Just when linux coders have written and debugged a driver for a tuner card, the manufacturers change the card (and don't tell anyone they have) or you can't buy it any more!

Yeah under the 810 alpha's the Dvico v2 works great ;-)

Andrew
Andy Herron,
Convergent Home Technologies Ltd
United Kingdom

Read My Blog; http://ellipticalcurve.com

Contact me for Smart Home consulting advice here;
@herron on Twitter, totallymaxed+consulting@gmail.com via email or PM me here.

Get a Dianemo S License: http://forum.linuxmce.org/index.php?topic=8880.0
iOS Orbiter: http://wiki.linuxmce.org/index.php/Dianemo_iOS_Orbiter
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

Sales & Info:
http://www.dianemo.co.uk

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4445
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Tuner Card's not being detcted at install
« Reply #8 on: December 29, 2008, 09:57:51 am »
totallymaxed - the card does not show up in the admin section you mentioned unless I add it.

Hmmm... well its one of two things I guess;

The Card is faulty... possible. Test that by adding it to your MD... does it get detected there? It should. If it does not then I would guess its the card as the chances of two motherboards having a PCI slot failure are pretty remote.

The Slot is faulty... If the test above works then that also probably proves that its the PCI slot in your Core (or some kind of IRQ clash possibly) thats causing the problem.

We use pvr-150's & 250's all the time and I have yet to see any fail to get detected.

All the best and a happy new year!

Andrew
Andy Herron,
Convergent Home Technologies Ltd
United Kingdom

Read My Blog; http://ellipticalcurve.com

Contact me for Smart Home consulting advice here;
@herron on Twitter, totallymaxed+consulting@gmail.com via email or PM me here.

Get a Dianemo S License: http://forum.linuxmce.org/index.php?topic=8880.0
iOS Orbiter: http://wiki.linuxmce.org/index.php/Dianemo_iOS_Orbiter
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

Sales & Info:
http://www.dianemo.co.uk

greenhornet

  • Veteran
  • ***
  • Posts: 59
    • View Profile
Re: Tuner Card's not being detcted at install
« Reply #9 on: December 31, 2008, 02:46:14 am »
As I mentioned earlier, I have 2 identical 150 cards & have tried them both.  I just finished swapping slots with a firewire card that is connected to my Sony DVD jukebox.  The firewire card is now in the 'old' PVR-150 slot and the jukebox still works fine.  However, the PVR-150 was moved to a known, working card slot and is still not "magically being detected."  It does not show up in the admin section under the media directors, tuner cards, nor am I getting any sort of on screen message.  I re-ran the wizard and there are no cards listed in the inputs section.

This is a brand new, 2 week old install.  I am convinced it is a device conflict or a corrupted setting that needs to be dumped.  I just don't know where else to look or what else to try.  Everybody keeps saying these things are just supposed to work.

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4445
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Tuner Card's not being detcted at install
« Reply #10 on: December 31, 2008, 12:00:54 pm »
This is a brand new, 2 week old install.  I am convinced it is a device conflict or a corrupted setting that needs to be dumped.  I just don't know where else to look or what else to try.  Everybody keeps saying these things are just supposed to work.

Hmmm... well they do 'just work' in my experience. So the implication is that the problem is local to your system.  Do the following from the console;

Code: [Select]
lspci -v <return>

You should get some output that looks like mine below (taken from one of our test Core's);

Code: [Select]
dcerouter_31343:~# lspci -v
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 925d                     
        Flags: bus master, fast devsel, latency 0                                           
        Capabilities: [e0] Vendor Specific Information                                       

00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0                                                                       
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0                                                     
        I/O behind bridge: 0000d000-0000dfff                                                                             
        Memory behind bridge: fa000000-fcffffff                                                                         
        Prefetchable memory behind bridge: c0000000-cfffffff                                                             
        Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000                                             
        Capabilities: [80] Power Management version 2                                                                   
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-                                 
        Capabilities: [a0] Express Root Port (Slot+) IRQ 0                                                               

00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 925d                                             
        Flags: bus master, fast devsel, latency 0, IRQ 16                                                           
        Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]                                                     
        Capabilities: [50] Power Management version 2                                                               
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-                             
        Capabilities: [70] Express Unknown type IRQ 0                                                               

00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 925d                                               
        Flags: bus master, medium devsel, latency 0, IRQ 20                                                           
        I/O ports at ff00 [size=32]                                                                                   

00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI])
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 925d                                               
        Flags: bus master, medium devsel, latency 0, IRQ 18                                                           
        I/O ports at fe00 [size=32]                                                                                   

00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI])
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 925d                                               
        Flags: bus master, medium devsel, latency 0, IRQ 17                                                           
        I/O ports at fd00 [size=32]                                                                                   

00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI])
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 925d                                               
        Flags: bus master, medium devsel, latency 0, IRQ 16                                                           
        I/O ports at fc00 [size=32]                                                                                   

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0                                               
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32                           
        I/O behind bridge: 0000e000-0000efff                                                     
        Memory behind bridge: f6000000-f9ffffff                                                 
        Prefetchable memory behind bridge: 00000000dc000000-00000000dfffffff                     
        Capabilities: [50] Subsystem: Intel Corporation 82801 PCI Bridge                         

00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 04)
        Subsystem: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge         
        Flags: bus master, medium devsel, latency 0                                       

00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP])
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 2651                                                             
        Flags: bus master, medium devsel, latency 0, IRQ 17                                                                         
        I/O ports at 01f0 [size=8]                                                                                                 
        I/O ports at 03f4 [size=1]                                                                                                 
        I/O ports at 0170 [size=8]                                                                                                 
        I/O ports at 0374 [size=1]                                                                                                 
        I/O ports at fb00 [size=16]                                                                                                 

00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 2651                                                           
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18                                                                 
        I/O ports at fa00 [size=8]                                                                                                 
        I/O ports at f900 [size=4]                                                                                                 
        I/O ports at f800 [size=8]                                                                                                 
        I/O ports at f700 [size=4]                                                                                                 
        I/O ports at f600 [size=16]                                                                                               
        Capabilities: [70] Power Management version 2                                                                             

00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 2651                       
        Flags: medium devsel, IRQ 15                                                         
        I/O ports at 0500 [size=32]                                                           

01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA])
        Subsystem: Micro-Star International Co., Ltd. Unknown device 034b                             
        Flags: bus master, fast devsel, latency 0, IRQ 16                                             
        Memory at fa000000 (32-bit, non-prefetchable) [size=16M]                                       
        Memory at c0000000 (64-bit, prefetchable) [size=256M]                                         
        Memory at fb000000 (64-bit, non-prefetchable) [size=16M]                                       
        [virtual] Expansion ROM at fc000000 [disabled] [size=128K]                                     
        Capabilities: [60] Power Management version 2                                                 
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-               
        Capabilities: [78] Express Endpoint IRQ 0                                                     

02:04.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc. WinTV PVR 250                                         
        Flags: bus master, medium devsel, latency 64, IRQ 18                                           
        Memory at dc000000 (32-bit, prefetchable) [size=64M]                                           
        Capabilities: [44] Power Management version 2                                                 

02:05.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 925d                                   
        Flags: bus master, stepping, medium devsel, latency 32, IRQ 19
        Memory at f9fff000 (32-bit, non-prefetchable) [size=2K]
        I/O ports at ef00 [size=128]
        Capabilities: [50] Power Management version 2

02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: FIRST INTERNATIONAL Computer Inc Unknown device 925d
        Flags: bus master, medium devsel, latency 32, IRQ 17
        I/O ports at ec00 [size=256]
        Memory at f9ffe000 (32-bit, non-prefetchable) [size=256]
        [virtual] Expansion ROM at f9000000 [disabled] [size=64K]
        Capabilities: [50] Power Management version 2

02:0b.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
        Subsystem: Hauppauge computer works Inc. Unknown device 9002
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

02:0b.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Nova-T DVB-T Model 909
        Flags: bus master, medium devsel, latency 32, IRQ 16
        Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2

02:0b.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Nova-T DVB-T Model 909
        Flags: bus master, medium devsel, latency 32, IRQ 12
        Memory at f7000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2


In the output above you will see device '02:04.0' is a pvr-250... you should see something similar for your pvr-150's... of course you should see two pvr-150's in your case.

All the best

Andrew
Andy Herron,
Convergent Home Technologies Ltd
United Kingdom

Read My Blog; http://ellipticalcurve.com

Contact me for Smart Home consulting advice here;
@herron on Twitter, totallymaxed+consulting@gmail.com via email or PM me here.

Get a Dianemo S License: http://forum.linuxmce.org/index.php?topic=8880.0
iOS Orbiter: http://wiki.linuxmce.org/index.php/Dianemo_iOS_Orbiter
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

Sales & Info:
http://www.dianemo.co.uk

greenhornet

  • Veteran
  • ***
  • Posts: 59
    • View Profile
Re: Tuner Card's not being detcted at install
« Reply #11 on: January 01, 2009, 05:18:55 am »
Andrew, Here's the result.  I've only got one 150 card installed at the moment and it looks like the OS detects it.  Why then would it not pop up on screen?

Code: [Select]
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [e0] HyperTransport: MSI Mapping

00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: 66MHz, fast devsel, IRQ 3
I/O ports at fc00 [size=32]
I/O ports at 4c00 [size=64]
I/O ports at 4c40 [size=64]
Capabilities: [44] Power Management version 2

00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
Memory at feb00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2

00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7585
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
I/O ports at f000 [size=256]
I/O ports at ec00 [size=256]
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at e000 [size=16]
Capabilities: [44] Power Management version 2

00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at cc00 [size=16]
Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18
I/O ports at 09e0 [size=8]
I/O ports at 0be0 [size=4]
I/O ports at 0960 [size=8]
I/O ports at 0b60 [size=4]
I/O ports at b800 [size=16]
Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fc800000-fd7fffff
Prefetchable memory behind bridge: f4000000-f7ffffff

00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
Memory at fe029000 (32-bit, non-prefetchable) [size=4K]
I/O ports at b400 [size=8]
Capabilities: [44] Power Management version 2

00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: f9000000-fbffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel

01:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
Flags: bus master, stepping, medium devsel, latency 64, IRQ 20
Memory at fd7ff000 (32-bit, non-prefetchable) [size=2K]
I/O ports at ac00 [size=128]
Capabilities: [50] Power Management version 2

01:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 150
Flags: bus master, medium devsel, latency 128, IRQ 23
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2

01:08.0 RAID bus controller: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID (rev 01)
Subsystem: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
I/O ports at a800 [size=16]
Memory at fd7fe000 (32-bit, non-prefetchable) [size=16]
Memory at fc800000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at fd000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 1

01:09.0 Ethernet controller: Marvell Technology Group Ltd. Belkin F5D5005 Gigabit Desktop Network PCI Card (rev 12)
Subsystem: Belkin Unknown device 5005
Flags: bus master, 66MHz, medium devsel, latency 23, IRQ 21
Memory at fd7f8000 (32-bit, non-prefetchable) [size=16K]
I/O ports at a400 [size=256]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data

05:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200 LE] (rev a1) (prog-if 00 [VGA])
Subsystem: Unknown device 19f1:2104
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fa000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [78] Express Endpoint IRQ 0
« Last Edit: January 01, 2009, 05:22:04 am by greenhornet »

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4445
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Tuner Card's not being detcted at install
« Reply #12 on: January 01, 2009, 10:23:03 am »
Andrew, Here's the result.  I've only got one 150 card installed at the moment and it looks like the OS detects it.  Why then would it not pop up on screen?

Code: [Select]
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [e0] HyperTransport: MSI Mapping

00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: 66MHz, fast devsel, IRQ 3
I/O ports at fc00 [size=32]
I/O ports at 4c00 [size=64]
I/O ports at 4c40 [size=64]
Capabilities: [44] Power Management version 2

00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
Memory at feb00000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2

00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7585
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
I/O ports at f000 [size=256]
I/O ports at ec00 [size=256]
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at e000 [size=16]
Capabilities: [44] Power Management version 2

00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at cc00 [size=16]
Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18
I/O ports at 09e0 [size=8]
I/O ports at 0be0 [size=4]
I/O ports at 0960 [size=8]
I/O ports at 0b60 [size=4]
I/O ports at b800 [size=16]
Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fc800000-fd7fffff
Prefetchable memory behind bridge: f4000000-f7ffffff

00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
Subsystem: Micro-Star International Co., Ltd. Unknown device 7125
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
Memory at fe029000 (32-bit, non-prefetchable) [size=4K]
I/O ports at b400 [size=8]
Capabilities: [44] Power Management version 2

00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: f9000000-fbffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel

01:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
Flags: bus master, stepping, medium devsel, latency 64, IRQ 20
Memory at fd7ff000 (32-bit, non-prefetchable) [size=2K]
I/O ports at ac00 [size=128]
Capabilities: [50] Power Management version 2

01:07.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR 150
Flags: bus master, medium devsel, latency 128, IRQ 23
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2

01:08.0 RAID bus controller: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID (rev 01)
Subsystem: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
I/O ports at a800 [size=16]
Memory at fd7fe000 (32-bit, non-prefetchable) [size=16]
Memory at fc800000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at fd000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 1

01:09.0 Ethernet controller: Marvell Technology Group Ltd. Belkin F5D5005 Gigabit Desktop Network PCI Card (rev 12)
Subsystem: Belkin Unknown device 5005
Flags: bus master, 66MHz, medium devsel, latency 23, IRQ 21
Memory at fd7f8000 (32-bit, non-prefetchable) [size=16K]
I/O ports at a400 [size=256]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data

05:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200 LE] (rev a1) (prog-if 00 [VGA])
Subsystem: Unknown device 19f1:2104
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fa000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [78] Express Endpoint IRQ 0

Hmmm... thats strange. All I can suggest is to reinstall from DVD or alternatively if you have another computer add the pvr-150 to that machine and add that to your current installation. Then see if the card gets detected.

Happy new year!

Andrew
Andy Herron,
Convergent Home Technologies Ltd
United Kingdom

Read My Blog; http://ellipticalcurve.com

Contact me for Smart Home consulting advice here;
@herron on Twitter, totallymaxed+consulting@gmail.com via email or PM me here.

Get a Dianemo S License: http://forum.linuxmce.org/index.php?topic=8880.0
iOS Orbiter: http://wiki.linuxmce.org/index.php/Dianemo_iOS_Orbiter
Follow us on Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

Sales & Info:
http://www.dianemo.co.uk

greenhornet

  • Veteran
  • ***
  • Posts: 59
    • View Profile
Re: Tuner Card's not being detcted at install
« Reply #13 on: January 05, 2009, 10:23:49 pm »
I had a spare hard drive laying around and I tried a clean install from DVD.  Same story.  No PVR-150 detection.  Is there an external card that will work AND can handle component or composite video signal?

Tommy

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: Tuner Card's not being detcted at install
« Reply #14 on: January 06, 2009, 10:56:11 am »
Hi there I had the same problem with my PVR150 card can TSCHAK and the guys helped me out, you need to do the following:

LMCE Admin

Advanced -> Configuration -> device templates -> Haupage -> pvr-interfaces cards -> Pvr-150

Under the plug&play section

Create a new plug&play device duplicating everything but the Vendor Model ID .

Don't save just yet.

Now goto a console and issue the following commands
1.   mysql -uroot pluto_main
2.   SELECT VendorModelId FROM PnpQueue WHERE VendorModelId LIKE "4444%" GROUP BY VendorModelId;

Select the result and add it to the "Vendor Model ID" pnp section of the PVR-150 Template, now save.

Still under mysql on the console

3. DELETE FROM PnpQueue WHERE VendorModelId LIKE '4444%';


Reboot and LMCE should detect your card.