I have recently set up a pluto hybrid system and install a Hauppauge Nova-T DVB card. It's the newer version, based on the cx-88 chipset.
I'm an experienced mythtv user, and have successfully set-up the card in a mythtv on FC4 and Knoppmyth. The card is installed in the hybrid core and the
cx88 software has been added to the core.
An extract from dmseg shows that the card is detected.
dcerouter_3777:~$ dmesg | grep cx
cx2388x v4l2 driver version 0.0.5 loaded
CORE cx88: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected]
cx88: hauppauge eeprom: model=90002
input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input2
cx88/0: found at 0000:02:09.0, rev: 5, irq: 161, latency: 32, mmio: 0xf7000000
cx88/0: registered device video0 [v4l2]
cx88/0: registered device vbi0
cx2388x blackbird driver version 0.0.5 loaded
The mythbackend doesn't seem to be able to interact with the card- it gives the errors "Frontend ID: Could not open card #0! Subtype: No such file or directory" when I try and use it.
On checking in /dev it appears no /dev/dvb entries exist. I recall when setting up the card on another system I had to create some udev rules which don't appear to be in Pluto by default.
Could others comment on whether they have the Nova-T card running in Pluto, and whether it works out of the box or if you had to tweak it manually?
extracts from lsmod below;
lsmod | grep dvb
dvb_ttpci 101788 0
l64781 8004 1 dvb_ttpci
saa7146_vv 51328 1 dvb_ttpci
saa7146 18792 2 dvb_ttpci,saa7146_vv
ves1820 6756 1 dvb_ttpci
stv0299 11272 1 dvb_ttpci
dvb_core 85608 2 dvb_ttpci,stv0299
tda8083 6628 1 dvb_ttpci
stv0297 9120 1 dvb_ttpci
sp8870 8076 1 dvb_ttpci
ves1x93 7172 1 dvb_ttpci
ttpci_eeprom 2816 1 dvb_ttpci
firmware_class 11264 4 bttv,dvb_ttpci,sp8870,cx88_blackbird
i2c_core 22576 15 bttv,dvb_ttpci,l64781,ves1820,stv0299,tda8083,stv0297,sp8870,ves1x93,ttpci_eeprom,cx88xx,i2c_algo_bit,tveeprom,i2c_ali1535,i2c_ali1563