Author Topic: GSD device suddenly stopped working - ESS GSD device  (Read 3265 times)

bulek

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 909
  • Living with LMCE
    • View Profile
GSD device suddenly stopped working - ESS GSD device
« on: March 25, 2009, 11:23:04 am »
Hi,

after some time I've again used my speaker selector as GSD deivce (I wrote GSD code), but it doesn't work anymore.

Even more, sending command to it, crashes GSD device and causes restart of winxp Orbiter (probably some other too).

Cause errors in log are a bit cryptic and unfamiliar to me, I'm kindly asking if someone knows better what those messages mean and where to start fixing things :
DCERouter.log :
Quote
13      03/25/09 12:04:24.265           TCPIP: Accepting incoming connection on socket 80, port 3450, from IP 127.0.0.1. <0xb4439b90>
08      03/25/09 12:04:24.269           Received Message from 0 (unknown / ) to 81 (Zone 1:Bedroom / House Speakers), type 1 id 192 Command:On, retry none, parameters: <0x98dfab90>
08      03/25/09 12:04:24.269             Parameter 97(PK_Pipe):  <0x98dfab90>
08      03/25/09 12:04:24.269             Parameter 98(PK_Device_Pipes):  <0x98dfab90>
13      03/25/09 12:04:24.270           Ready to send message type 1 id 192 to 80 ESS-Speaker Selector RS232 on socket 127(0x79414608) using lock: 0x794146ec <0xb6c3eb90>
13      03/25/09 12:04:24.270           Response 1 to realsendmessage type 1 id 192 socket 153 using lock: 0x794146ec  expected response: 0 <0xb6c3eb90>
13      03/25/09 12:04:24.270           Got response: 1 to message type 1 id 192 to 80 ESS-Speaker Selector RS232 on socket 153 using lock: 0x794146ec <0xb6c3eb90>
13      03/25/09 12:04:24.270           No response expected.  returning <0xb6c3eb90>
3       03/25/09 12:04:25       DCERouter (server)      Device died... count=10/200 dev=DCERouter

GSD device log :
Quote
/var/log/pluto/80_Generic_Serial_Device.log

25-03-2009  11:45:20  (***):SetVolumeInZone: volume: 100 [10] => Zone: 4
25-03-2009  11:45:20  (***):Send_RS232_Command: [0419]
25-03-2009  11:45:20  (***):Initialization of ESS GSD Device finished !!!!
25-03-2009  11:45:20  (***):Response from ESS: [0002]
25-03-2009  11:45:21  (***):Response from ESS: [0020]
25-03-2009  11:45:21  (***):Response from ESS: [0003]
25-03-2009  11:45:21  (***):Response from ESS: [0119]
25-03-2009  11:45:21  (***):Response from ESS: [0219]
25-03-2009  11:45:21  (***):Response from ESS: [0319]
25-03-2009  11:45:21  (***):Response from ESS: [0419]
05   03/25/09 12:04:24.270      GSDMessageTranslator isCmdImplemented = false <0xb6009b90>
05   03/25/09 12:04:24.299      #### Pre-Process Queue = 1 <0xb6009b90>
05   03/25/09 12:04:24.299      _QueueProc Pre - 192 : 0 <0xb780cb90>
05   03/25/09 12:04:24.300      GSD-Sleep Pre 192 : 0 <0xb780cb90>
05   03/25/09 12:04:24.300      Process Queue = 1 <0xb780cb90>
25-03-2009  12:04:24  (***):Got Command with ID: 192 from: 0 to: 81
25-03-2009  12:04:24  (***):SendZoneCommand: Child Zone Zone 1[1]
25-03-2009  12:04:24  (***):Send_RS232_Command: [0101]
05   03/25/09 12:04:24.303      GSD-Sleep Post 192 : 0 <0xb780cb90>
05   03/25/09 12:04:24.303      _QueueProc Post - 192 : 0 <0xb780cb90>
25-03-2009  12:04:24  (***):Response from ESS: [0101]
05   03/25/09 12:04:25.575      Socket::ReceiveData 0x80aa6c0 failed, bytes left 0 start: 109430000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 8 Command_Impl1 Dev #80 <0xb6009b90>
13   03/25/09 12:04:25.575      Socket::Close() m_Socket 8 <0xb6009b90>
13   03/25/09 12:04:25.575      Socket::Close() m_Socket 8 closesocket: 0 <0xb6009b90>
05   03/25/09 12:04:25.575      Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Command_Impl1 Dev #80 <0xb6009b90>
01   03/25/09 12:04:25.575      Receive string failed in HandleRequestSocket 18:ReceiveData failed Command_Impl1 Dev #80 <0xb6009b90>
05   03/25/09 12:04:25.576      Dumping 1 locks <0xb6009b90>
05   03/25/09 12:04:25.576      finished check for exceptions <0xb6009b90>
05   03/25/09 12:04:25.576      OL: (0x80aa80c) (>102) MessageQueue Command_Impl.cpp l:822 time: 1:00:00a (1237979065 s) thread: 3061885840 Rel: Y Got: Y <0xb6009b90>
13   03/25/09 12:04:25.576      Exiting MessageQueueThread_DCECI thread... <0xb680ab90>
25-03-2009  12:04:25  (***):Send_RS232_Command: [0002]
05   03/25/09 12:04:25.624      Trying to send DATA while not connected. <0xb5808b90>
25-03-2009  12:04:25  (***):Send_RS232_Command: [0020]
05   03/25/09 12:04:25.624      Trying to send DATA while not connected. <0xb5808b90>
25-03-2009  12:04:25  (***):Send_RS232_Command: [0003]
05   03/25/09 12:04:25.625      Trying to send DATA while not connected. <0xb5808b90>
25-03-2009  12:04:25  (***):Shutting Down ESS GSD Device finished !!!!
13   03/25/09 12:04:25.625      Exiting BeginHandleRequestThread thread... <0xb6009b90>
13   03/25/09 12:04:25.802      Socket::Close() m_Socket 4 <0xb780d6c0>
13   03/25/09 12:04:25.802      Socket::Close() m_Socket 4 closesocket: 0 <0xb780d6c0>
13   03/25/09 12:04:25.802      Socket::Close() m_Socket 5 <0xb780d6c0>
13   03/25/09 12:04:25.802      Socket::Close() m_Socket 5 closesocket: 0 <0xb780d6c0>
13   03/25/09 12:04:25.805      Socket::~Socket(): deleting socket @0x80ab6d8 Event Dev #80 (socket id in destructor: m_Socket: -1) <0xb780d6c0>
13   03/25/09 12:04:25.805      Socket::~Socket(): deleting socket @0x813b318 Event Dev #80 (socket id in destructor: m_Socket: -1) <0xb780d6c0>
13   03/25/09 12:04:25.805      ~HandleRequestSocket 0x80aa6c0 device: 80 ip: 127.0.0.1 <0xb780d6c0>
13   03/25/09 12:04:25.805      RequestSocket::Disconnect 0x80aa6c0 device: 80 <0xb780d6c0>
13   03/25/09 12:04:25.805      Socket::~Socket(): deleting socket @0x80aa6c0 Command_Impl1 Dev #80 (socket id in destructor: m_Socket: -1) <0xb780d6c0>
Return code: 2
2   03/25/09 12:04:26   80 (spawning-device)   Device requests restart... count=1/50 dev=80
Wed Mar 25 12:04:26 CET 2009 Restart
========== NEW LOG SECTION ==========
1   03/25/09 12:04:34   80 (spawning-device)   Starting... 1
1   03/25/09 12:04:34   80 (spawning-device)   Found /usr/pluto/bin/Generic_Serial_Device
05   03/25/09 12:04:37.288      Creating child 81 <0xb77b56c0>
05   03/25/09 12:04:37.288      Note: Device manager has attached a device of type 1867 that this has no custom event handler for.  It will not fire events. <0xb77b56c0>
05   03/25/09 12:04:37.288      Note: Device manager has attached a device of type 1867 that this has no custom handler for.  This is normal for IR. <0xb77b56c0>
05   03/25/09 12:04:37.288      Creating child 82 <0xb77b56c0>
05   03/25/09 12:04:37.288      Note: Device manager has attached a device of type 1867 that this has no custom event handler for.  It will not fire events. <0xb77b56c0>
05   03/25/09 12:04:37.288      Note: Device manager has attached a device of type 1867 that this has no custom handler for.  This is normal for IR. <0xb77b56c0>
05   03/25/09 12:04:37.288      Creating child 83 <0xb77b56c0>
05   03/25/09 12:04:37.289      Note: Device manager has attached a device of type 1867 that this has no custom event handler for.  It will not fire events. <0xb77b56c0>
05   03/25/09 12:04:37.289      Note: Device manager has attached a device of type 1867 that this has no custom handler for.  This is normal for IR. <0xb77b56c0>
05   03/25/09 12:04:37.289      Creating child 84 <0xb77b56c0>
05   03/25/09 12:04:37.289      Note: Device manager has attached a device of type 1867 that this has no custom event handler for.  It will not fire events. <0xb77b56c0>
05   03/25/09 12:04:37.289      Note: Device manager has attached a device of type 1867 that this has no custom handler for.  This is normal for IR. <0xb77b56c0>
RCODE:
   0:require 'Ruby_Generic_Serial_Device'
   1:class Command < Ruby_Generic_Serial_Device::RubyCommandWrapper
   2:end
   3:class Device_80 < Ruby_Generic_Serial_Device::RubySerialIOWrapper
   4:#### 192 ####################################################################
   5:def cmd_192(pk_pipe, pk_device_pipes, cmd=nil)
   6:@returnParamArray.clear
   7:SendZoneCommand(cmd)
   8:
   9:return @returnParamArray
  10:end
  11:#### 193 ####################################################################
  12:def cmd_193(pk_pipe, cmd=nil)
  13:@returnParamArray.clear
  14:SendZoneCommand(cmd)
  15:
  16:return @returnParamArray
  17:end
  18:#### 313 ####################################################################
  19:def cmd_313(level, cmd=nil)
  20:@returnParamArray.clear
  21:SendZoneCommand(cmd)
  22:
  23:return @returnParamArray
  24:end
  25:#### 350 ####################################################################
  26:def cmd_350(cmd=nil)
  27:@returnParamArray.clear
  28:ReceiveReport()
  29:
  30:
  31:return @returnParamArray
  32:end
  33:#### 355 ####################################################################
  34:def cmd_355(cmd=nil)
  35:@returnParamArray.clear
  36:log("Initializing ESS GSD Device\n")
  37:
  38:sleep 1.0
  39:Send_RS232_Command("0002");  #All Zones OFF
  40:sleep 1.0
  41:Send_RS232_Command("0020");  #All Zones Max Volume
  42:sleep 1.0
  43:Send_RS232_Command("0003");  #All Zones Select A
  44:sleep 1.0
  45:$ZoneVolumes = Hash.new()
  46:$ZoneStatus  = Hash.new()
  47:
  48:SetZones("OFF")
  49:SetZonesInitialVolumes()
  50:
  51:log("Initialization of ESS GSD Device finished !!!!\n")
  52:
  53:
  54:
  55:return @returnParamArray
  56:end
  57:#### 356 ####################################################################
  58:def cmd_356(cmd=nil)
  59:@returnParamArray.clear
  60:Send_RS232_Command("0002");  #All Zones OFF
  61:
  62:Send_RS232_Command("0020");  #All Zones Max Volume
  63:
  64:Send_RS232_Command("0003");  #All Zones Select A
  65:
  66:
  67:log("Shutting Down ESS GSD Device finished !!!!\n")
  68:
  69:return @returnParamArray
  70:end
  71:#### PRIVATE METHODS ####################################################################
  72:###########################################################3 Internal Methods
  73:# To do list :
  74:# - parsing of response from device (needed for advanced use)
  75:#
  76:#
  77:# RS232 protocol, ZN=Zone Number (00 is all, 01-31 separate zones)
  78:# ZN 01 ON
  79:# ZN 02 OFF
  80:# ZN 03 A AMP
  81:# ZN 04 B AMP
  82:# ZN 07 VOLUME UP
  83:# ZN 08 VOLUME DOWN
  84:# ZN 09 SET LEVEL 0
  85:# ZN 10 SET LEVEL 1
  86:# ZN 11 SET LEVEL 2
  87:# ZN 12 SET LEVEL 3
  88:# ZN 13 SET LEVEL 4
  89:# ZN 14 SET LEVEL 5
  90:# ZN 15 SET LEVEL 6
  91:# ZN 16 SET LEVEL 7
  92:# ZN 17 SET LEVEL 8
  93:# ZN 18 SET LEVEL 9
  94:# ZN 19 SET LEVEL 10
  95:# ZN 20 SET LEVEL 11
  96:# ZN 32 ? STATUS
  97:# ZN 33 ? LEVEL
  98:# ZN 34 ? ON/OFF
  99:# ZN 35 ? A/B
 100:#Example responses to queries (todo)
 101:#[0132]{16}
 102:#[0133]{06}
 103:#[0032]{16}
 104:#{16}
 105:#{1B}
 106:#{3B}
 107:#[0034]{10}
 108:#{10}
 109:#{10}
 110:#{10}
 111:#[0035]{00}
 112:#{00}
 113:#{00}
 114:#{20}
 115:
 116:
 117:def log(line)
 118:         $log = File.open("/var/log/pluto/" + device_.devid_.to_s + "_Generic_Serial_Device.log", "a")
 119:#     $log = File.open("/var/log/pluto/ESS.log", "a")
 120:     logTime = Time.now
 121:     timeStr = logTime.strftime("%d-%m-%Y  %H:%M:%S  ")
 122:
 123:     $log.puts timeStr + "(***):" + line.to_s
 124:          $log.close
 125:end    
 126:
 127:def Send_RS232_Command(command)
 128:        log("Send_RS232_Command: [" + command+ "]\n")
 129:   conn_.Send("[" + command+ "]")
 130:end
 131:
 132:
 133:def SendZoneCommand(cmd)
 134:
 135:  log("Got Command with ID: " + cmd.id_.to_s + " from: " + cmd.devidfrom_.to_s + " to: " + cmd.devidto_.to_s + "\n")
 136:  zone = GetZone(cmd.devidto_)
 137:  if( zone >= 0 )
 138:#           zone_desc=device_.childdevices_[cmd.devidto_].devdata_[186]
 139:           zone_desc = sprintf ("Zone %d",zone)
 140:      log("SendZoneCommand: Child Zone " + zone_desc + "[" + zone.to_s + "]\n")
 141:  elsif (cmd.devidto_ == device_.devid_)
 142:      log("SendZoneCommand: All Zones " + zone.to_s + ". Sending command to all zones !!!")
 143:      zone=0
 144:      zone_desc="All Zones"
 145:  else
 146:      log("SendZoneCommand: Invalid zone " + zone.to_s + ". Send commands only to valid devices!!!")
 147:  end
 148:  
 149:  serial_command = ""
 150:  
 151:  case cmd.id_
 152:        when 192 #192 is ON
 153:           serial_command = sprintf("%02d",zone)+sprintf("%02d",1);
 154:           Send_RS232_Command(serial_command);
 155:           temp_cmd = Command.new(cmd.id_, -1001, 1, 2, 48);
 156:           temp_cmd.params_[10] = "1";
 157:           SendCommand(temp_cmd);
 158:           $ZoneStatus[zone.to_s] = "ON";
 159:           if (zone==0)
 160:              SetZones("ON")
 161:           end
 162:        when 193 #193 is OFF
 163:           serial_command = sprintf("%02d",zone)+sprintf("%02d",2);
 164:           Send_RS232_Command(serial_command);
 165:           temp_cmd = Command.new(cmd.id_, -1001, 1, 2, 48);
 166:           temp_cmd.params_[10] = "0";
 167:           SendCommand(temp_cmd);
 168:           $ZoneStatus[zone.to_s] = "OFF";
 169:           if (zone==0)
 170:              SetZones("OFF")
 171:           end
 172:
 173:        when 90 #90 is Volume Down
 174:           serial_command = sprintf("%02d",zone)+sprintf("%02d",8);
 175:           Send_RS232_Command(serial_command);
 176:           $ZoneVolumes[zone.to_s] = $ZoneVolumes[zone.to_s] - 10
 177:           if ($ZoneVolumes[zone.to_s]<0)
 178:              $ZoneVolumes[zone.to_s]=0
 179:      end
 180:           SetDeviceDataInDB( cmd.devidto_, 158, ($ZoneVolumes[zone.to_s]).to_s ) # 158 = DEVICEDATA_Volume_Level_CONST
 181:           temp_cmd = Command.new(cmd.devidto_, -1001, 1, 2, 71);
 182:           temp_cmd.params_[30] = ($ZoneVolumes[zone.to_s]).to_s
 183:           SendCommand(temp_cmd);
 184:      
 185:        when 89 #90 is Volume Up
 186:           serial_command = sprintf("%02d",zone)+sprintf("%02d",7);
 187:           Send_RS232_Command(serial_command);
 188:           $ZoneVolumes[zone.to_s] = $ZoneVolumes[zone.to_s] + 10
 189:           if ($ZoneVolumes[zone.to_s]>=120)
 190:              $ZoneVolumes[zone.to_s]=110
 191:      end
 192:           SetDeviceDataInDB( cmd.devidto_, 158, ($ZoneVolumes[zone.to_s]).to_s ) # 158 = DEVICEDATA_Volume_Level_CONST
 193:           temp_cmd = Command.new(cmd.devidto_, -1001, 1, 2, 71);
 194:           temp_cmd.params_[30] = ($ZoneVolumes[zone.to_s]).to_s
 195:           SendCommand(temp_cmd);
 196:        when 313 #313 is Set Volume with Level as Param #76
 197:      log("313:Set Volume Command: Got Cmd with ID: " + cmd.id_.to_s + " from: " + cmd.devidfrom_.to_s + " to: " + cmd.devidto_.to_s + " | Zone : " + zone.to_s + "\n")
 198:           level=(cmd.params_[76]).to_i
 199:           if level >110
 200:              level=110
 201:         log("313:Set Volume Command: Volume too high - truncated to max level of 110\n")
 202:           elsif level <0
 203:              level=0
 204:         log("313:Set Volume Command: Volume too low - truncated to min level of 0\n")
 205:           end
 206:      level = (level/10.0).round
 207:           serial_command = sprintf("%02d",zone)+sprintf("%02d",level+9);
 208:           Send_RS232_Command(serial_command);
 209:           $ZoneVolumes[zone.to_s] = (cmd.params_[76]).to_i
 210:           SetDeviceDataInDB( cmd.devidto_, 158, ($ZoneVolumes[zone.to_s]).to_s ) # 158 = DEVICEDATA_Volume_Level_CONST
 211:           temp_cmd = Command.new(cmd.devidto_, -1001, 1, 2, 71);
 212:           temp_cmd.params_[30] = ($ZoneVolumes[zone.to_s]).to_s
 213:           SendCommand(temp_cmd);
 214:           if (zone==0)
 215:              SetVolumes($ZoneVolumes[zone.to_s])
 216:           end
 217:
 218:        when 616 #616 is Select A
 219:           serial_command = sprintf("%02d",zone)+sprintf("%02d",3);
 220:           Send_RS232_Command(serial_command);
 221:        when 617 #617 is Select B
 222:           serial_command = sprintf("%02d",zone)+sprintf("%02d",4);
 223:           Send_RS232_Command(serial_command);
 224:        else
 225:           log("Yet not implemented: Handler for command: ID " + cmd.id.to_s)
 226:     end
 227:   
 228:
 229:end
 230:
 231:
 232:def GetZone(deviceDestination)
 233:   if( device_.mapDevice_PortChannel_.has_key?(deviceDestination) and
 234:      device_.mapDevice_PortChannel_[deviceDestination] != nil and
 235:      !device_.mapDevice_PortChannel_[deviceDestination].empty? )
 236:      return device_.mapDevice_PortChannel_[deviceDestination].to_i
 237:   end
 238:   
 239:   return -1
 240:end
 241:
 242:
 243:def ReceiveReport()
 244:   @buff = conn_.RecvDelimited("]", 1000)
 245:   log("Response from ESS: " + @buff + "\n")
 246:#   log("Calling DecodeReceivedInfo: " + @buff + "\n")
 247:#   temp_resp=@buff;
 248:#   DecodeReceivedInfo(temp_resp)
 249:#   log("End of DecodeReceivedInfo: " + temp_resp + "\n")
 250:end
 251:
 252:def SetVolumeInZone(level,zone)
 253:# Sets Normalized Volume Level (0..100) in certain zone
 254:  normlevel = (level.to_i/10.0).round
 255:  log("SetVolumeInZone: volume: " + level.to_s + " ["+ normlevel.to_s + "] => Zone: " + zone + "\n")
 256:
 257:  serial_command = sprintf("%02d",zone)+sprintf("%02d",normlevel+9);
 258:  Send_RS232_Command(serial_command);
 259:#  log("313:Set Volume Command: Got Cmd with ID: " + cmd.id_.to_s + " from: " + cmd.devidfrom_.to_s + " to: " + cmd.devidto_.to_s + " | Zone : " + zone.to_s + "\n")
 260:  $ZoneVolumes[zone.to_s] = level.to_i
 261:
 262:end
 263:
 264:def SetZonesInitialVolumes()
 265:   log("####### Set Initial Volume Levels for zones\n")
 266:   device_.mapDevice_PortChannel_.each do |key, value|
 267:      volume = device_.childdevices_[key].devdata_[208]
 268:      log("Zone " + value.to_s + " => " + volume.to_s + "\n")
 269:      sleep 1.0
 270:      SetVolumeInZone(volume.to_i,value)
 271:        SetDeviceDataInDB( device_.childdevices_[key].devid_, 158, ($ZoneVolumes[value.to_s]).to_s ) # 158 = DEVICEDATA_Volume_Level_CONST
 272:     end
 273:   
 274:end
 275:
 276:
 277:def SetZones(state)
 278:   log("####### Setting all zones to " + state + "\n")
 279:   device_.mapDevice_PortChannel_.each do |key, value|
 280:      $ZoneStatus[value] = state
 281:      log("Zone " + value.to_s + " => " + state + "\n")
 282:    end
 283:end
 284:
 285:def SetVolumes(level_int)
 286:   log("####### Set Volume Levels for all zones\n")
 287:   device_.mapDevice_PortChannel_.each do |key, value|
 288:      log("Zone " + value.to_s + " => " + level_int.to_s + "\n")
 289:      $ZoneVolumes[value.to_s] = level_int
 290:        SetDeviceDataInDB( device_.childdevices_[key].devid_, 158, ($ZoneVolumes[value.to_s]).to_s ) # 158 = DEVICEDATA_Volume_Level_CONST
 291:     end
 292:end
 293:def cmd_ReceiveCommandForChild(cmd)
 294:SendZoneCommand(cmd)
 295:
 296:end
 297:#### 953 ####################################################################
 298:def cmd_953(cmd=nil)
 299:@returnParamArray.clear
 300:SendZoneCommand(cmd)
 301:
 302:return @returnParamArray
 303:end
 304:#### 954 ####################################################################
 305:def cmd_954(cmd=nil)
 306:@returnParamArray.clear
 307:SendZoneCommand(cmd)
 308:
 309:return @returnParamArray
 310:end
 311:#### START SETTERS ####################################################################
 312:def initialize()
 313:super
 314:@returnParamArray=Array.new
 315:end
 316:####  END  SETTERS ####################################################################
 317:end


Thanks in advance,

regards,

Bulek.
« Last Edit: March 25, 2009, 12:11:36 pm by bulek »
Thanks in advance,

regards,

Bulek.

krys

  • Addicted
  • *
  • Posts: 583
    • View Profile
Re: GSD device suddenly stopped working - ESS GSD device
« Reply #1 on: March 25, 2009, 03:30:31 pm »
Would you mind if I asked the model of speaker selector you are using.

bulek

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 909
  • Living with LMCE
    • View Profile
Re: GSD device suddenly stopped working - ESS GSD device
« Reply #2 on: March 25, 2009, 05:56:27 pm »
Would you mind if I asked the model of speaker selector you are using.

http://wiki.linuxmce.org/index.php/ESS_Expandable_Speaker_Selector_Switch

But AFAIK, they seem to be out of business - a pity, device is really nice and worth every penny... I just wish I had bought more zones initially....

I don't know any other similar product for similar price...

Regards,

Bulek.
Thanks in advance,

regards,

Bulek.

bulek

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 909
  • Living with LMCE
    • View Profile
Re: GSD device suddenly stopped working - ESS GSD device
« Reply #3 on: April 11, 2009, 10:07:12 pm »
Hi,

still didn't move any further. My GSD device that used to work for a long time under 7.10 now doesn't work anymore - it even crashes DCERouter...

Anyone with more insight, what is getting wrong ?

Quote
/var/log/pluto/80_Generic_Serial_Device.log

11-04-2009  20:17:46  (***):SetVolumeInZone: volume: 100 [10] => Zone: 4
11-04-2009  20:17:46  (***):Send_RS232_Command: [0419]
11-04-2009  20:17:46  (***):Initialization of ESS GSD Device finished !!!!
11-04-2009  20:17:46  (***):Response from ESS: [0002]
11-04-2009  20:17:46  (***):Response from ESS: [0020]
11-04-2009  20:17:46  (***):Response from ESS: [0003]
11-04-2009  20:17:46  (***):Response from ESS: [0119]
11-04-2009  20:17:46  (***):Response from ESS: [0219]
11-04-2009  20:17:46  (***):Response from ESS: [0319]
11-04-2009  20:17:46  (***):Response from ESS: [0419]
05   04/11/09 20:52:56.006      GSDMessageTranslator isCmdImplemented = false <0xb6066b90>
05   04/11/09 20:52:56.014      #### Pre-Process Queue = 1 <0xb6066b90>
05   04/11/09 20:52:56.051      _QueueProc Pre - 192 : 0 <0xb7869b90>
05   04/11/09 20:52:56.051      GSD-Sleep Pre 192 : 0 <0xb7869b90>
05   04/11/09 20:52:56.051      Process Queue = 1 <0xb7869b90>
11-04-2009  20:52:56  (***):Got Command with ID: 192 from: 57 to: 84
11-04-2009  20:52:56  (***):SendZoneCommand: Child Zone Zone 4[4]
11-04-2009  20:52:56  (***):Send_RS232_Command: [0401]
05   04/11/09 20:52:56.074      GSD-Sleep Post 192 : 0 <0xb7869b90>
05   04/11/09 20:52:56.074      _QueueProc Post - 192 : 0 <0xb7869b90>
11-04-2009  20:52:56  (***):Response from ESS: [0401]
05   04/11/09 20:52:56.696      Socket::ReceiveData 0x80aa6c0 failed, bytes left 0 start: 109800000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 8 Command_Impl1 Dev #80 <0xb6066b90>
13   04/11/09 20:52:56.696      Socket::Close() m_Socket 8 <0xb6066b90>
13   04/11/09 20:52:56.696      Socket::Close() m_Socket 8 closesocket: 0 <0xb6066b90>
05   04/11/09 20:52:56.696      Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Command_Impl1 Dev #80 <0xb6066b90>
01   04/11/09 20:52:56.696      Receive string failed in HandleRequestSocket 18:ReceiveData failed Command_Impl1 Dev #80 <0xb6066b90>
05   04/11/09 20:52:56.733      Dumping 1 locks <0xb6066b90>
05   04/11/09 20:52:56.733      finished check for exceptions <0xb6066b90>
05   04/11/09 20:52:56.733      OL: (0x80aa80c) (>108) MessageQueue Command_Impl.cpp l:822 time: 1:00:00a (1239475976 s) thread: 3062266768 Rel: Y Got: Y <0xb6066b90>
11-04-2009  20:52:56  (***):Send_RS232_Command: [0002]
05   04/11/09 20:52:56.739      Trying to send DATA while not connected. <0xb5865b90>
11-04-2009  20:52:56  (***):Send_RS232_Command: [0020]
05   04/11/09 20:52:56.739      Trying to send DATA while not connected. <0xb5865b90>
11-04-2009  20:52:56  (***):Send_RS232_Command: [0003]
05   04/11/09 20:52:56.739      Trying to send DATA while not connected. <0xb5865b90>
11-04-2009  20:52:56  (***):Shutting Down ESS GSD Device finished !!!!
13   04/11/09 20:52:56.741      Exiting BeginHandleRequestThread thread... <0xb6066b90>
13   04/11/09 20:52:56.926      Exiting MessageQueueThread_DCECI thread... <0xb6867b90>
13   04/11/09 20:52:56.939      Socket::Close() m_Socket 4 <0xb786a6c0>
13   04/11/09 20:52:56.982      Socket::Close() m_Socket 4 closesocket: 0 <0xb786a6c0>
13   04/11/09 20:52:56.982      Socket::Close() m_Socket 5 <0xb786a6c0>
13   04/11/09 20:52:56.982      Socket::Close() m_Socket 5 closesocket: 0 <0xb786a6c0>
13   04/11/09 20:52:56.984      Socket::~Socket(): deleting socket @0x80ab6d8 Event Dev #80 (socket id in destructor: m_Socket: -1) <0xb786a6c0>
13   04/11/09 20:52:56.985      Socket::~Socket(): deleting socket @0x8140700 Event Dev #80 (socket id in destructor: m_Socket: -1) <0xb786a6c0>
13   04/11/09 20:52:56.985      ~HandleRequestSocket 0x80aa6c0 device: 80 ip: 127.0.0.1 <0xb786a6c0>
13   04/11/09 20:52:56.985      RequestSocket::Disconnect 0x80aa6c0 device: 80 <0xb786a6c0>
13   04/11/09 20:52:56.985      Socket::~Socket(): deleting socket @0x80aa6c0 Command_Impl1 Dev #80 (socket id in destructor: m_Socket: -1) <0xb786a6c0>
Return code: 2
2   04/11/09 20:52:57   80 (spawning-device)   Device requests restart... count=1/50 dev=80
Sat Apr 11 20:52:58 CEST 2009 Restart
========== NEW LOG SECTION ==========

Thanks in advance,

regards,

Bulek.
Thanks in advance,

regards,

Bulek.

bulek

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 909
  • Living with LMCE
    • View Profile
Re: GSD device suddenly stopped working - ESS GSD device
« Reply #4 on: April 12, 2009, 12:10:35 am »
Hi,

 found the problem. It seems that sending event was the cause - there was a bug in the code, but obviously it didn't bother much before....

Regards,

Bulek.
Thanks in advance,

regards,

Bulek.