Author Topic: wiimote not connecting  (Read 3637 times)

cazze

  • Newbie
  • *
  • Posts: 4
    • View Profile
wiimote not connecting
« on: July 09, 2008, 12:49:22 am »
Hi,

i followed the wiki, but i am still running against the same problem:
if i use wminput or wmgui, even with the BADDR defined, i get Socket connect error (interrupt channel)
My BT addapters sees the wiimote if i do a hcitool scan, and the lsmw command gives me the right mack address.

Any ID?

Cazze

pigdog

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1105
    • View Profile
Re: wiimote not connecting
« Reply #1 on: July 09, 2008, 03:22:32 am »
Hi,

Make extra sure that the address provided with HCI scan is the address you programmed as BADDR.

If the resolution is low/small on the terminal window you can easily misread the HCI tool address.

Double/triple check your address.

The wiki works for Core, Core/Hybrid's and MD's.  I've tried them all.

Usually when something didn't work it was a silly error on my part.

Cheers.

cazze

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: wiimote not connecting
« Reply #2 on: July 17, 2008, 10:25:58 pm »
ok, i did some more test.

First, on a real system and not in a vm.
Second, with 2 different bluetooth dongles.

What i did find, is that it works, till the orbiter pops up a new bluetooth device found and proposes 3 different devices, one phone and 2 other devices.
The only choice you have here is ignore for now or ignore for ever.
After this screen, the WiiRemote stops working :(

Any id's?

Cazze

pigdog

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1105
    • View Profile
Re: wiimote not connecting
« Reply #3 on: July 18, 2008, 12:06:16 am »
So is this on a real system not a VM?

How many bluetooth devices are connected?

cazze

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: wiimote not connecting
« Reply #4 on: July 18, 2008, 08:32:06 am »
problem in both cases: vm and real system. Same problem

I always connect only 1 bluetooth dongle. If i test the other dongle, i take out the previous and wait a moment for the needed scripts to catch up (dont know if this pause is needed).

I turned off bluetooth of my phone, as i first thought that was the problem, but that didn't change anything. I saw in another thread that i'm not the only one, but there wasn't a solution posted. 

pigdog

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1105
    • View Profile
Re: wiimote not connecting
« Reply #5 on: July 18, 2008, 02:05:03 pm »
Hi,

Did you see this post about disabling the generation of new alerts?

http://forum.linuxmce.org/index.php?topic=5169.0

Hope this is useful.