Author Topic: missing link destination  (Read 3576 times)

coley

  • Guru
  • ****
  • Posts: 481
    • View Profile
Re: missing link destination
« Reply #15 on: July 30, 2008, 03:08:37 pm »
 ;D finally there is an end to this!!
Not so much a resolution but a solution.
I bought a new machine for the core - clean DVD install of 710.
Booted this MD and seems to have gone though generation of machine image.
All seems to have worked first go  :D

Thanks Zaerc for your input trying to get to the end of this!! in the end this motherboard seems ok so far.
vga only at the moment, need to verify DVI/HDMI operation.
I've added it to the wiki and will update as I progress.

Before I nuke the old LMCE partition on my other dual boot machine is it worth looking at this old install with a view to check why this was failing?

-Coley.

p.s. UI2 overlay looks sweet and has a high WAF ;)

MarcoZan

  • Veteran
  • ***
  • Posts: 148
    • View Profile
Re: missing link destination
« Reply #16 on: July 30, 2008, 06:16:13 pm »
I also have solved somehow ....

I reinstalled everything from scratch on the very same hardware, and now PXE boot is working fine.

So it seems not strictly related to hardware, but to some other strange thing that may have happened during the first install process.

My 0,02, of course.

HTH
Marco

Esperanto

  • Guru
  • ****
  • Posts: 253
    • View Profile
Re: missing link destination
« Reply #17 on: September 16, 2008, 07:15:31 pm »
I also had a

mount call failed: 13

running in a loop.

After running:

exportfs -ra

on the core/hybrid I walked back to the MD and it was running.