Author Topic: iMON PAD + LCD on Thermaltake DH101  (Read 14819 times)

enrique.lopez

  • Regular Poster
  • **
  • Posts: 45
    • View Profile
Re: iMON PAD + LCD on Thermaltake DH101
« Reply #15 on: May 01, 2008, 08:52:31 am »
I've iMON PAD 2.4G (usb), it's the same procedure for installation?
Thanks

gazlang

  • Guru
  • ****
  • Posts: 210
    • View Profile
Re: iMON PAD + LCD on Thermaltake DH101
« Reply #16 on: May 01, 2008, 02:21:21 pm »
Don't know until you give it a go.
But the pad to keys patch will not work as you will use a different lirc driver (You will have to select the imon pad 2.4g from the lirc setup menu instead of the imon pad/vfd) - you will probably have limited real functionality because of this (unless you assign other keys to up, down left right in the lircd.conf)

As for the setup in LMCE admin, again, you can only try. I presume that because the imon pad 2.4g is part of LIRC then it should work. You will need a different lircd.conf though to copy into the admin device data. You will find it in /etc/lircd.conf when you compile lirc in KDE.
AMD Athlon 5800+ X2
Asus M2N-SLI-Deluxe
2x Corsair XMS6400 DDR2 512mb
Samsung 400GB SATA + 500GB SATA
nVidia GeForce 7300GT
Hauppauge Nova-T 500
Hauppauge PVR-500
Thermaltake low-noise 450w PSU
Thermaltake Bach Case w/ imon vfd
Fiire Remote
UIRT

enrique.lopez

  • Regular Poster
  • **
  • Posts: 45
    • View Profile
Re: iMON PAD + LCD on Thermaltake DH101
« Reply #17 on: May 01, 2008, 06:25:30 pm »
Don't know until you give it a go.
But the pad to keys patch will not work as you will use a different lirc driver (You will have to select the imon pad 2.4g from the lirc setup menu instead of the imon pad/vfd) - you will probably have limited real functionality because of this (unless you assign other keys to up, down left right in the lircd.conf)

As for the setup in LMCE admin, again, you can only try. I presume that because the imon pad 2.4g is part of LIRC then it should work. You will need a different lircd.conf though to copy into the admin device data. You will find it in /etc/lircd.conf when you compile lirc in KDE.

Hi Gazlang, i select in the lirc 0.8.2 setup pad 2.4G, but i d'ont know where copy the *.conf in LMCE.
Regards

nite_man

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1019
  • Want to work with LinuxMCE
    • View Profile
    • Smart Home Blog
Re: iMON PAD + LCD on Thermaltake DH101
« Reply #18 on: May 01, 2008, 11:03:08 pm »
You should create a manufacture - Soundgraph and a  new template - iMON PAD under category LIRC --> Peripheries --> Remote. Add a new property there - Configuration and put LIRC.conf there. See details here - http://tinyurl.com/2hqask.
Michael Stepanov,
My setup: http://wiki.linuxmce.org/index.php/User:Nite_man#New_setup
Russian LinuxMCE community: http://linuxmce.ru

enrique.lopez

  • Regular Poster
  • **
  • Posts: 45
    • View Profile
Re: iMON PAD + LCD on Thermaltake DH101
« Reply #19 on: May 15, 2008, 01:24:44 am »
You should create a manufacture - Soundgraph and a  new template - iMON PAD under category LIRC --> Peripheries --> Remote. Add a new property there - Configuration and put LIRC.conf there. See details here - http://tinyurl.com/2hqask.
Impossible, i d'ont find new property in the new template and in http://tinyurl.com/2hqask non.
Thanks.