Author Topic: 710B4: Constant "Done with .... bluetooth_hci: ..." on Orbiters  (Read 2997 times)

bulek

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 909
  • Living with LMCE
    • View Profile
Hi,

I'm getting those alerts every few seconds constantly on all Orbiters. Same bluetooth dongle worked ok under 704.

Anyone else experiencing something similar ?

Something that could be suspicious: I have Mobile Orbiter on Nokia N70 in **RUN_CONFIG** state, although I received .sis file and installed it correctly...

Thanks in advance,

regards,

Bulek.

Bluetooth log :
Quote
05   03/14/08 8:14:52.261      Can't connect RFCOMM socket 00:16:4E:DA:12:03, channel 19 <0xb5833b90>
05   03/14/08 8:14:52.261      Waiting any operation with the socket to finish... <0xb5833b90>
05   03/14/08 8:14:52.261      BDCommandProcessor_Linux_Bluetooth is destroyed. <0xb5833b90>
05   03/14/08 8:14:52.261      Failed to connect to PlutoMO. We'll resume scanning <0xb5833b90>
05   03/14/08 8:14:52.262      Resuming scanning... <0xb5833b90>
05   03/14/08 8:14:52.271      Inquiry started <0xb6835b90>
05   03/14/08 8:14:55.851      Detected device mac: 00:16:4E:DA:12:03 link quality: 0 <0xb5032b90>
05   03/14/08 8:14:55.857      About to connect to PlutoMO. We'll suspend scanning... <0xb5833b90>
05   03/14/08 8:14:55.858      Suspending scanning... <0xb5833b90>
05   03/14/08 8:14:55.873      Inquiry complete

DCERouter's log :
Quote
07   03/14/08 8:15:54.255      Event #4 has no handlers <0x77dadb90>
07   03/14/08 8:15:54.255      Received Message from 42 (Bluetooth Dongle / Closet/Storage Space) to -1001 (unknown / ), type 2 id 4 Event:Mobile orbiter detected, retry none, parameters: <0x77dadb90>
07   03/14/08 8:15:54.255        Parameter 5(Mac Address): 00:16:4E:DA:12:03 <0x77dadb90>
07   03/14/08 8:15:54.255        Parameter 6(Signal Strength): 0 <0x77dadb90>
07   03/14/08 8:15:54.255        Parameter 7(ID): Nokia N70 robi <0x77dadb90>
08   03/14/08 8:15:54.256      Received Message from 9 (Orbiter Plug-in / ) to 42 (Bluetooth Dongle / Closet/Storage Space), type 1 id 60 Command:Link with mobile orbiter, retry none, parameters: <0xabf83b90>
08   03/14/08 8:15:54.256        Parameter 47(Mac address): 00:16:4E:DA:12:03 <0xabf83b90>
08   03/14/08 8:15:54.256        Parameter 118(VMC File): /usr/pluto/bin/dev_62.vmc <0xabf83b90>
08   03/14/08 8:15:54.256        Parameter 130(Config File): /usr/pluto/bin/PlutoMO_62.cfg <0xabf83b90>
07   03/14/08 8:15:54.277      Event #65 has no handlers <0x71da1b90>
07   03/14/08 8:15:54.277      Received Message from 16 (HAL / Closet/Storage Space) to -1001 (unknown / ), type 2 id 65 Event:Device Detected, retry none, parameters: <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 5(Mac Address):  <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 13(Text):  <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 28(IP Address):  <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 49(PK_DeviceTemplate): 0 <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 51(VendorModelID): ffffffff <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 52(PK_CommMethod): 4 <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 53(PK_PnpProtocol): 0 <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 54(PNP Serial Number): /org/freedesktop/Hal/devices/usb_device_a12_1_noserial_if0 <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 55(DeviceData):  <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 56(Category): bluetooth_hci <0x71da1b90>
07   03/14/08 8:15:54.277        Parameter 59(Signature): 16,HAL <0x71da1b90>
08   03/14/08 8:15:54.282      Received Message from 16 (HAL / Closet/Storage Space) to OnScreen Orbiter(20), type 1 id  809 Command:Display Alert, retry none, parameters: <0xa176eb90>
08   03/14/08 8:15:54.282        Parameter 9(Text): 20611 Done with new device bluetooth_hci Added: Bluetooth Dongle <0xa176eb90>
08   03/14/08 8:15:54.282        Parameter 70(Tokens): pnp_20611 <0xa176eb90>
08   03/14/08 8:15:54.282        Parameter 182(Timeout): 2 <0xa176eb90>
08   03/14/08 8:15:54.282        Parameter 251(Interruption): 2 <0xa176eb90>
07   03/14/08 8:15:59.262      Event #66 has no handlers <0x71da1b90>
07   03/14/08 8:15:59.262      Received Message from 16 (HAL / Closet/Storage Space) to -1001 (unknown / ), type 2 id 66 Event:Device Removed, retry none, parameters: <0x71da1b90>
07   03/14/08 8:15:59.262        Parameter 5(Mac Address):  <0x71da1b90>
07   03/14/08 8:15:59.262        Parameter 13(Text):  <0x71da1b90>
07   03/14/08 8:15:59.262        Parameter 26(PK_Device): 0 <0x71da1b90>
07   03/14/08 8:15:59.262        Parameter 28(IP Address):  <0x71da1b90>
07   03/14/08 8:15:59.263        Parameter 49(PK_DeviceTemplate): 0 <0x71da1b90>
07   03/14/08 8:15:59.263        Parameter 51(VendorModelID):  <0x71da1b90>
07   03/14/08 8:15:59.263        Parameter 52(PK_CommMethod): 4 <0x71da1b90>
07   03/14/08 8:15:59.263        Parameter 53(PK_PnpProtocol): 0 <0x71da1b90>
07   03/14/08 8:15:59.263        Parameter 54(PNP Serial Number): /org/freedesktop/Hal/devices/usb_device_a12_1_noserial_if0_bluetooth_hci_bluetooth_hci <0x71da1b90>
07   03/14/08 8:15:59.263        Parameter 55(DeviceData):  <0x71da1b90>
07   03/14/08 8:15:59.263        Parameter 56(Category):  <0x71da1b90>
07   03/14/08 8:16:00.779      Event #4 has no handlers <0x77dadb90>
07   03/14/08 8:16:00.779      Received Message from 42 (Bluetooth Dongle / Closet/Storage Space) to -1001 (unknown / ), type 2 id 4 Event:Mobile orbiter detected, retry none, parameters: <0x77dadb90>
07   03/14/08 8:16:00.779        Parameter 5(Mac Address): 00:16:4E:DA:12:03 <0x77dadb90>
07   03/14/08 8:16:00.779        Parameter 6(Signal Strength): 0 <0x77dadb90>
07   03/14/08 8:16:00.780        Parameter 7(ID): Nokia N70 robi <0x77dadb90>
08   03/14/08 8:16:00.780      Received Message from 9 (Orbiter Plug-in / ) to 42 (Bluetooth Dongle / Closet/Storage Space), type 1 id 60 Command:Link with mobile orbiter, retry none, parameters: <0xabf83b90>
08   03/14/08 8:16:00.780        Parameter 47(Mac address): 00:16:4E:DA:12:03 <0xabf83b90>
08   03/14/08 8:16:00.780        Parameter 118(VMC File): /usr/pluto/bin/dev_62.vmc <0xabf83b90>
08   03/14/08 8:16:00.780        Parameter 130(Config File): /usr/pluto/bin/PlutoMO_62.cfg <0xabf83b90>
07   03/14/08 8:16:00.809      Event #65 has no handlers <0x71da1b90>
07   03/14/08 8:16:00.809      Received Message from 16 (HAL / Closet/Storage Space) to -1001 (unknown / ), type 2 id 65 Event:Device Detected, retry none, parameters: <0x71da1b90>
07   03/14/08 8:16:00.809        Parameter 5(Mac Address):  <0x71da1b90>
07   03/14/08 8:16:00.810        Parameter 13(Text):  <0x71da1b90>
07   03/14/08 8:16:00.810        Parameter 28(IP Address):  <0x71da1b90>
07   03/14/08 8:16:00.810        Parameter 49(PK_DeviceTemplate): 0 <0x71da1b90>
07   03/14/08 8:16:00.810        Parameter 51(VendorModelID): ffffffff <0x71da1b90>
07   03/14/08 8:16:00.810        Parameter 52(PK_CommMethod): 4 <0x71da1b90>
07   03/14/08 8:16:00.810        Parameter 53(PK_PnpProtocol): 0 <0x71da1b90>
07   03/14/08 8:16:00.810        Parameter 54(PNP Serial Number): /org/freedesktop/Hal/devices/usb_device_a12_1_noserial_if0 <0x71da1b90>
07   03/14/08 8:16:00.810        Parameter 55(DeviceData):  <0x71da1b90>
07   03/14/08 8:16:00.810        Parameter 56(Category): bluetooth_hci <0x71da1b90>
07   03/14/08 8:16:00.810        Parameter 59(Signature): 16,HAL <0x71da1b90>
08   03/14/08 8:16:00.820      Received Message from 16 (HAL / Closet/Storage Space) to OnScreen Orbiter(20), type 1 id  809 Command:Display Alert, retry none, parameters: <0xa176eb90>
08   03/14/08 8:16:00.820        Parameter 9(Text): 20613 Done with new device bluetooth_hci Added: Bluetooth Dongle <0xa176eb90>
08   03/14/08 8:16:00.821        Parameter 70(Tokens): pnp_20613 <0xa176eb90>
08   03/14/08 8:16:00.821        Parameter 182(Timeout): 2 <0xa176eb90>
08   03/14/08 8:16:00.821        Parameter 251(Interruption): 2 <0xa176eb90>
07   03/14/08 8:16:05.758      Event #66 has no handlers <0x71da1b90>
07   03/14/08 8:16:05.758      Received Message from 16 (HAL / Closet/Storage Space) to -1001 (unknown / ), type 2 id 66 Event:Device Removed, retry none, parameters: <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 5(Mac Address):  <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 13(Text):  <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 26(PK_Device): 0 <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 28(IP Address):  <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 49(PK_DeviceTemplate): 0 <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 51(VendorModelID):  <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 52(PK_CommMethod): 4 <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 53(PK_PnpProtocol): 0 <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 54(PNP Serial Number): /org/freedesktop/Hal/devices/usb_device_a12_1_noserial_if0_bluetooth_hci_bluetooth_hci <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 55(DeviceData):  <0x71da1b90>
07   03/14/08 8:16:05.758        Parameter 56(Category):  <0x71da1b90>
« Last Edit: March 14, 2008, 08:20:12 am by bulek »
Thanks in advance,

regards,

Bulek.

hari

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 2428
    • View Profile
    • ago control
Re: 710B4: Constant "Done with .... bluetooth_hci: ..." on Orbiters
« Reply #1 on: March 14, 2008, 08:27:17 am »
Code: [Select]
05   03/14/08 8:14:52.261      Can't connect RFCOMM socket 00:16:4E:DA:12:03, channel 19 <0xb5833b90>

do you have bluetooth enabled on the phone?

best regards,
Hari
rock your home - http://www.agocontrol.com home automation

gazlang

  • Guru
  • ****
  • Posts: 210
    • View Profile
Re: 710B4: Constant "Done with .... bluetooth_hci: ..." on Orbiters
« Reply #2 on: March 14, 2008, 08:32:22 am »
I have this problem too with my N95.

I told LMCE to upload the orbiter software and I received it on my phone (can't install on the N95, so gonna try Haris java orbiter later). But now my phones bluetooth icon switches on and off, and I get the "Done with .... bluetooth_hci: ..." like you.

I tried a different phone (LG Viewty - not a symbian) and told LMCE again to upload the orbiter software but (obviously) this time it failed, and while this phone is on there are no bluetooth alerts.

Must keep flashing up because it's waiting for a response from the mobile orbiter perhaps??
AMD Athlon 5800+ X2
Asus M2N-SLI-Deluxe
2x Corsair XMS6400 DDR2 512mb
Samsung 400GB SATA + 500GB SATA
nVidia GeForce 7300GT
Hauppauge Nova-T 500
Hauppauge PVR-500
Thermaltake low-noise 450w PSU
Thermaltake Bach Case w/ imon vfd
Fiire Remote
UIRT

hari

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 2428
    • View Profile
    • ago control
Re: 710B4: Constant "Done with .... bluetooth_hci: ..." on Orbiters
« Reply #3 on: March 14, 2008, 10:57:08 am »
it's because lmce sees your phone with a hci scan.. then it tries to open the rfcomm port to the phone..

when there is no application running it of course can't connect.

best regards,
Hari
« Last Edit: March 16, 2008, 05:22:39 pm by hari »
rock your home - http://www.agocontrol.com home automation