Author Topic: About Raid 1  (Read 1022 times)

bemficag

  • Regular Poster
  • **
  • Posts: 40
    • View Profile
About Raid 1
« on: February 16, 2008, 11:32:19 pm »
Hi guys,

That´s the problem: I have a mb abit AN-M2HD w/ 4 SATA slots, and the slot # 2 (SATA2) has one of the pins broke. So, now I have the slots 1, 3 and 4 working. My question is, Can I use Raid 1 w/ the slots 1 and 3???

thanks

Matthew

  • Douchebag
  • Addicted
  • *
  • Posts: 567
    • View Profile
Re: About Raid 1
« Reply #1 on: February 16, 2008, 11:39:08 pm »
Hi guys,

That´s the problem: I have a mb abit AN-M2HD w/ 4 SATA slots, and the slot # 2 (SATA2) has one of the pins broke. So, now I have the slots 1, 3 and 4 working. My question is, Can I use Raid 1 w/ the slots 1 and 3???

What does that have to do with LinuxMCE? You should ask that question on a RAID list, or the manufacturer.

bemficag

  • Regular Poster
  • **
  • Posts: 40
    • View Profile
Re: About Raid 1
« Reply #2 on: February 16, 2008, 11:55:33 pm »
I really don't know which section I have to go, I've using the linuxmce 0704, and now I want to use 2 HDs SATA on Raid 1.

thanks

teedge77

  • Addicted
  • *
  • Posts: 591
    • View Profile
Re: About Raid 1
« Reply #3 on: February 17, 2008, 12:00:03 am »
What he was trying to say was that you should check somewhere other than the linuxmce forums. This really is more of a hardware issue that is totally independent of linuxmce.

My best guess would be, that as long as you can activate them both and set them to use the raid you want then they should work fine. it shouldnt matter which port you use as long as you activate them into the raid. you should just try it and see if it works.
AMD Athlon 64 X2 6000+
Asus M2V Via AM2 ATX
Lite-On LH-20A1S SATA DVD Burner
80GB  SATA-150
EVGA GeForce 7300 GT 512MB DDR2 PCI Express
Sound Blaster Audigy SE
Kingston 2 GB PC6400 DDR2 800MHz
Ultra X-Finity 800-Watt
ZCU000
Cisco 7970
TDM400P

bemficag

  • Regular Poster
  • **
  • Posts: 40
    • View Profile
Re: About Raid 1
« Reply #4 on: February 17, 2008, 12:02:14 am »
Thanks teedge