Author Topic: 7.10 beta 3 wont boot after install (odd problem i think)  (Read 1759 times)

cophew

  • Newbie
  • *
  • Posts: 5
    • View Profile
7.10 beta 3 wont boot after install (odd problem i think)
« on: February 11, 2008, 09:28:05 pm »
Hi i have just installed 7.10b3 onto a clean disk from a DVD and after install it just doesn't boot right. I have not found this problem anywhere else so anyway :

GRUB starts as normal.

Kubuntu loading screen is also normal.

The cursor then blinks and shows a text screen with the message :

Code: [Select]
Starting up
Please Wait...

ubuntu 7.10 dcerouter tty1
dcerouter login

2 seconds later, oddly the screen refeshes with the cursor blinking and then says :

Code: [Select]
Reloading open BSD secure shell server's configuration sshd
...Done

The screen refreshes, the curor blicks again for about two seconds and the screen goes blank with no rgb input. I though this might be the AV Wizard but i hear no sound out my monitor speaker. After trying the button combinations on the sticky thead (1,7) it does nothing as pressing any key will bring up :

Code: [Select]
Reloading open BSD secure shell server's configuration sshd
...Done

dcerouter login

Annoyingly the screen goes to "cursor then blank" as before every few (3 or 4) or seconds then going back to the same screen. Note that if i am halfway though typeing something the screen will go to blank, i will press any key and it will load at that point. Nothing gets reloaded. I tried using the "linuxmce" on both username and password and after that i get the usual "Last login ect... Ubuntu comes with NO WARRENTY..." message.

then

linuxmce@dcerouter:~$

and goes into command line, still blacking every two seconds. I dont know what to do at this point as I have no idea how to use the command line execpt in the terminal in ubuntu. I am not a PC noob, but i have only used ubuntu for about a month. I really need some help.

Anyway heres my PC specs if you need them (Note, I custom built it) :

Gigabyte S-series GA-P35DS3/S3 - Motherboard
Intel Core 2 Duo 4400 - CPU
Nvidia Geforce 8400GS - GPU
Western Digital IDE 40GB - Hard drive (I know its not this because i had a similar problem with the same install on a 500GB Sata II Western Digital HDD)
2GB Corsair DDR2 RAM
OEM Monitor (No branding) upto 1280x1024 with built in speakers
ASUS DVD-RW Drive (could that be the problem maybe? A corrupt disk?)
Realtek ethernet ports built in to motherboard (Not being used - showed many errors during install)
Zyxel USB wifi dongle

I dont think i missed out anything. Just ask if i have. Please help

rafik24

  • Guru
  • ****
  • Posts: 158
    • View Profile
Re: 7.10 beta 3 wont boot after install (odd problem i think)
« Reply #1 on: February 12, 2008, 12:45:27 am »
  Hi,

 it  seem to me like  AVWizard is trying to start but is aint able to.
try removing both  /etc/X11/xorg.conf and xorg.conf.pluto.avwizard

 it this does not work try killing the Start_X.sh script and install the right  driver for your graphic card.

 there is a nice  Diplay driver page on the wiki you can follow.

 hope this  helps,

Rafik

colinjones

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 3003
    • View Profile
Re: 7.10 beta 3 wont boot after install (odd problem i think)
« Reply #2 on: February 12, 2008, 01:59:44 am »
One way or another, X is trying to start and looks like it is failing which is why it is going back to the console, then it tries again and again. Login (probably easiest with an ssh session from another computer - using PuTTY for instance), and read your /var/log/Xorg.0.log file. It should tell you what is going wrong. Possibly driver issues given you are using an 8400...

cophew

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: 7.10 beta 3 wont boot after install (odd problem i think)
« Reply #3 on: February 12, 2008, 12:02:06 pm »
Ok i removed xorg.conf and xorg.conf.pluto.avwizard. AVWizard started but it hung after page one. now goes in to avwizard then hangs and reverts to console. Heres the Xorg.x.log files (wont attach for some reason), Dont know what it all means.

cophew

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: 7.10 beta 3 wont boot after install (odd problem i think)
« Reply #4 on: February 12, 2008, 12:06:21 pm »
Xorg.0.log

Code: [Select]
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Linux Ubuntu (xorg-server 2:1.3.0.0.dfsg-12ubuntu8)
Current Operating System: Linux linuxmce0710 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 i686
Build Date: 29 September 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov  1 13:00:10 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "VMware Inc [VMware SVGA II] PCI Display Adapter"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81ea440
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 15ad,1976 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 01 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 15ad,1976 rev 08 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 15ad,1976 rev 01 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 15ad,1976 rev 00 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 15ad,1976 rev 08 class 06,80,00 hdr 80
(II) PCI: 00:0f:0: chip 15ad,0405 card 15ad,0405 rev 00 class 03,00,00 hdr 00
(II) PCI: 00:10:0: chip 1000,0030 card 0000,0000 rev 01 class 01,00,00 hdr 00
(II) PCI: 00:11:0: chip 1022,2000 card 1022,2000 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:12:0: chip 1274,1371 card 1274,1371 rev 02 class 04,01,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0080 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:15:0) VMware Inc [VMware SVGA II] PCI Display Adapter rev 0, Mem @ 0xf0000000/27, 0xe8000000/23, I/O @ 0x14c0/4
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xec000000 from 0xefffffff to 0xebffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe8800000 - 0xe8800fff (0x1000) MX[B]
[1] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]O
[2] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
[3] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[4] -1 0 0x00001480 - 0x000014bf (0x40) IX[B]
[5] -1 0 0x00001400 - 0x0000147f (0x80) IX[B]
[6] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[7] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]
[8] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]
[9] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe8800000 - 0xe8800fff (0x1000) MX[B]
[1] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]O
[2] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
[3] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[4] -1 0 0x00001480 - 0x000014bf (0x40) IX[B]
[5] -1 0 0x00001400 - 0x0000147f (0x80) IX[B]
[6] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[7] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]
[8] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]
[9] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xe8800000 - 0xe8800fff (0x1000) MX[B]
[5] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]O
[6] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
[7] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x00001480 - 0x000014bf (0x40) IX[B]
[11] -1 0 0x00001400 - 0x0000147f (0x80) IX[B]
[12] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[13] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]
[14] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]
[15] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "vmware"
(II) Loading /usr/lib/xorg/modules/drivers//vmware_drv.so
(II) Module vmware: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 10.15.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) VMWARE: driver for VMware SVGA: vmware0405, vmware0710
(II) Primary Device is: PCI 00:0f:0
(--) Chipset vmware0405 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] 0 0 0x000b8000 - 0x000bffff (0x8000) MX[B]
[1] 0 0 0x000b0000 - 0x000b7fff (0x8000) MX[B]
[2] 0 0 0x000a0000 - 0x000affff (0x10000) MX[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe8800000 - 0xe8800fff (0x1000) MX[B]
[8] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]O
[9] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
[10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] 0 0 0x000003c0 - 0x000003df (0x20) IX[B]
[12] 0 0 0x000003b0 - 0x000003bb (0xc) IX[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x00001480 - 0x000014bf (0x40) IX[B]
[16] -1 0 0x00001400 - 0x0000147f (0x80) IX[B]
[17] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[18] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]
[19] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]
[20] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B](B)
(II) resource ranges after probing:
[0] 0 0 0x000b8000 - 0x000bffff (0x8000) MX[B]
[1] 0 0 0x000b0000 - 0x000b7fff (0x8000) MX[B]
[2] 0 0 0x000a0000 - 0x000affff (0x10000) MX[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe8800000 - 0xe8800fff (0x1000) MX[B]
[8] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]O
[9] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
[10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] 0 0 0x000003c0 - 0x000003df (0x20) IX[B]
[12] 0 0 0x000003b0 - 0x000003bb (0xc) IX[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x00001480 - 0x000014bf (0x40) IX[B]
[16] -1 0 0x00001400 - 0x0000147f (0x80) IX[B]
[17] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[18] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]
[19] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]
[20] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B](B)
(II) Setting vga for screen 0.
(--) VMWARE(0): VMware SVGA regs at (0x14c0, 0x14c1)
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.2
(--) VMWARE(0): caps:  0x000383E2
(--) VMWARE(0): depth: 24
(--) VMWARE(0): bpp:   32
(--) VMWARE(0): vram:  16777216
(--) VMWARE(0): pbase: 0xf0000000
(--) VMWARE(0): mwidt: 2360
(--) VMWARE(0): mheig: 1770
(II) VMWARE(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(--) VMWARE(0): depth: 24
(--) VMWARE(0): bpp:   32
(--) VMWARE(0): w.red: 8
(--) VMWARE(0): w.grn: 8
(--) VMWARE(0): w.blu: 8
(--) VMWARE(0): vis:   4
(**) VMWARE(0): Depth 24, (--) framebuffer bpp 32
(==) VMWARE(0): RGB weight 888
(==) VMWARE(0): Default visual is TrueColor
(==) VMWARE(0): Using HW cursor
(==) VMWARE(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VMWARE(0): Generic Monitor: Using hsync range of 30.00-70.00 kHz
(II) VMWARE(0): Generic Monitor: Using vrefresh range of 50.00-160.00 Hz
(WW) VMWARE(0): Unable to estimate virtual size
(II) VMWARE(0): Clock range:   0.00 to 400000.00 MHz
(II) VMWARE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1280x960" (hsync out of range)
(II) VMWARE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1280x1024" (hsync out of range)
(II) VMWARE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1280x1024" (hsync out of range)
(II) VMWARE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1600x1200" (hsync out of range)
(II) VMWARE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1600x1200" (hsync out of range)
(II) VMWARE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1600x1200" (hsync out of range)
(II) VMWARE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1600x1200" (hsync out of range)
(II) VMWARE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1600x1200" (hsync out of range)
(II) VMWARE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1792x1344" (hsync out of range)
(II) VMWARE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1792x1344" (hsync out of range)
(II) VMWARE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1856x1392" (hsync out of range)
(II) VMWARE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1856x1392" (hsync out of range)
(II) VMWARE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1920x1440" (hsync out of range)
(II) VMWARE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1920x1440" (hsync out of range)
(II) VMWARE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1152x864" (hsync out of range)
(II) VMWARE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1400x1050" (hsync out of range)
(II) VMWARE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1400x1050" (hsync out of range)
(II) VMWARE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1400x1050" (hsync out of range)
(II) VMWARE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1920x1200" (hsync out of range)
(II) VMWARE(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1920x1200" (hsync out of range)
(II) VMWARE(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "1920x1440" (hsync out of range)
(II) VMWARE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "2048x1536" (hsync out of range)
(II) VMWARE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "2048x1536" (hsync out of range)
(II) VMWARE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "2048x1536" (hsync out of range)
(II) VMWARE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) VMWARE(0): Virtual size is 1680x1050 (pitch 1696)
(**) VMWARE(0): *Default mode "1680x1050": 147.1 MHz, 65.2 kHz, 60.0 Hz
(II) VMWARE(0): Modeline "1680x1050"  147.14  1680 1784 1968 2256  1050 1051 1054 1087

cophew

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: 7.10 beta 3 wont boot after install (odd problem i think)
« Reply #5 on: February 12, 2008, 12:07:18 pm »
Continued :

Code: [Select]
(**) VMWARE(0): *Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) VMWARE(0): Modeline "1400x1050"  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync
(**) VMWARE(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) VMWARE(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
(**) VMWARE(0): *Default mode "1440x900": 108.8 MHz, 56.9 kHz, 60.2 Hz
(II) VMWARE(0): Modeline "1440x900"  108.84  1440 1472 1880 1912  900 918 927 946 +hsync +vsync
(**) VMWARE(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) VMWARE(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) VMWARE(0): *Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) VMWARE(0): Modeline "1280x800"   83.46  1280 1344 1480 1680  800 801 804 828
(**) VMWARE(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) VMWARE(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
(**) VMWARE(0): *Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) VMWARE(0): Modeline "1280x768"   80.14  1280 1344 1480 1680  768 769 772 795
(**) VMWARE(0): *Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) VMWARE(0): Modeline "1152x768"   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync
(**) VMWARE(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) VMWARE(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) VMWARE(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) VMWARE(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) VMWARE(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) VMWARE(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) VMWARE(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) VMWARE(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) VMWARE(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) VMWARE(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) VMWARE(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) VMWARE(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) VMWARE(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) VMWARE(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) VMWARE(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) VMWARE(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) VMWARE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) VMWARE(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) VMWARE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) VMWARE(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) VMWARE(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) VMWARE(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) VMWARE(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) VMWARE(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) VMWARE(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) VMWARE(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 -hsync -vsync
(**) VMWARE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) VMWARE(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 -hsync -vsync
(**) VMWARE(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) VMWARE(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) VMWARE(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) VMWARE(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) VMWARE(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) VMWARE(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(==) VMWARE(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(II) VMWARE(0): Initialized VMWARE_CTRL extension version 0.2
(II) VMWARE(0): Initialized VMware Xinerama extension.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x000b8000 - 0x000bffff (0x8000) MX[B]
[1] 0 0 0x000b0000 - 0x000b7fff (0x8000) MX[B]
[2] 0 0 0x000a0000 - 0x000affff (0x10000) MX[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xe8800000 - 0xe8800fff (0x1000) MX[B]
[8] -1 0 0xec000000 - 0xebffffff (0x0) MX[B]O
[9] -1 0 0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
[10] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[11] 0 0 0x000003c0 - 0x000003df (0x20) IX[B]
[12] 0 0 0x000003b0 - 0x000003bb (0xc) IX[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x00001480 - 0x000014bf (0x40) IX[B]
[16] -1 0 0x00001400 - 0x0000147f (0x80) IX[B]
[17] -1 0 0x00001080 - 0x000010ff (0x80) IX[B]
[18] -1 0 0x00001060 - 0x0000107f (0x20) IX[B]
[19] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]
[20] -1 0 0x000014c0 - 0x000014cf (0x10) IX[B](B)
(II) VMWARE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) VMWARE(0): Write-combining range (0xf0000000,0x1000000)
(==) VMWARE(0): Backing store disabled
(==) VMWARE(0): Silken mouse enabled
(WW) VMWARE(0): Option "DPMS" is not used
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) Configured Mouse: ps2EnableDataReporting: succeeded

also have Xorg.1 and .2 seem to have information in them i have them if needed
« Last Edit: February 12, 2008, 12:16:55 pm by cophew »

seth

  • Guru
  • ****
  • Posts: 485
  • A day w/o LinuxMCE is like a day w/o sunshine!
    • View Profile
Re: 7.10 beta 3 wont boot after install (odd problem i think)
« Reply #6 on: February 12, 2008, 04:34:31 pm »
Have you tried switching the video outputs of your card. If the AV wizard is running, then it may be directong to the wrong video card output. You may have to switch outputs, and resolutions using the AV Manager wiki document, the most important part is here:

 Keys for choosing a connector:

 1: DVI
 2: VGA
 3: Component
 4: Composite
 5: S-Video

And for the resolution

 Keys for choosing a resolution:

 6: 640x480
 7: 1024x768
 8: 720p
 9: 1080i
 0: 1080p

I had to use number 5 and number 6 to get it to display properly, from the svideo port on my nvidia card, to my 42" Projection TV.

Hope this helps.
".....Because Once you've LinuxMCE'd....."
System stats located at my user page:

http://wiki.linuxmce.org/index.php/User:Seth

cophew

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: 7.10 beta 3 wont boot after install (odd problem i think)
« Reply #7 on: February 12, 2008, 06:44:14 pm »
Thanks but its definatly not that. The av wizard usually hangs after that stage, also i cant change the resolution or it also hangs.

I installed the nvidia drive but it didnt do anything. After running AVWizard nothing happens. Just goes to console. If i restart then i have to delete xorg.conf and xorg.conf.pluto.wizard again before it will work, And even then i have to go back to the AVWizard. So there's really no way out of it.

Zaerc

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 2256
  • Department of Redundancy Department.
    • View Profile
Re: 7.10 beta 3 wont boot after install (odd problem i think)
« Reply #8 on: February 13, 2008, 12:09:56 am »
Try configuring a basic xorg.conf manually as described here: http://wiki.linuxmce.org/index.php/Display_Drivers.
"Change is inevitable. Progress is optional."
-- Anonymous


Maverick7687

  • Making baby steps
  • Posts: 3
    • View Profile
Re: 7.10 beta 3 wont boot after install (odd problem i think)
« Reply #9 on: December 05, 2008, 12:37:58 pm »
Is there any closure on this topic? It seems I am having the same problem after ditching the onboard ATI Xpress 200 for a GeForce 8400gs.

I have the monitor hooked up to the VGA output on the card, the onboard card disabled in BIOS and the Video option set to PCI-E.

After making the funny beep noise I can press 1-5 and they all do the exact same thing. The VGA monitor comes on, shows what the OP posted, then turns back off (Power Save mode).