Author Topic: LMCE on Dell SX270  (Read 4297 times)

Elitoh

  • Regular Poster
  • **
  • Posts: 15
    • View Profile
LMCE on Dell SX270
« on: February 06, 2008, 11:51:02 pm »
I have this little dell. Its a P4 2.8 with 2 gigs of ram and 20gig hd. It uses the 865g Intel GMA. It installs successfully and goes through the motions of setting up the mce. A few questions. is there any way that I can use the UI2 with out alpha blending, or is the vdo card too much of a POS? If I turn off DHCP and disable the router I cant get in to the admin page from any computer except the core. I can ping it and get replies but no admin page from anywhere else. I also use the gyration remote from Gyration and not the FIIRE remote, does the mod work pretty good? Any replies would be very helpful thanks everyone.

Elitoh

  • Regular Poster
  • **
  • Posts: 15
    • View Profile
Re: LMCE on Dell SX270
« Reply #1 on: February 07, 2008, 12:13:15 am »
Also have any of you hooked up a digital cable scientific atlanta hd box via the usb port or firewire port and got any signals or anything?

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: LMCE on Dell SX270
« Reply #2 on: February 09, 2008, 08:12:18 am »
I have 2 of them that i use for MDs since they are so quiet as far as the ui2 thats a no the card cant handle it i just use the basic, still rocks for a little machine though
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards

Elitoh

  • Regular Poster
  • **
  • Posts: 15
    • View Profile
Re: LMCE on Dell SX270
« Reply #3 on: February 13, 2008, 12:11:04 am »
what are your settings on that little guy?

MANDINGO

  • Guru
  • ****
  • Posts: 204
    • View Profile
Re: LMCE on Dell SX270
« Reply #4 on: February 13, 2008, 01:07:29 am »
First Things first you have to flash to the lastest bios to get the pxe boot feature
http://support.dell.com/support/downloads/download.aspx?c=us&cs=19&l=en&s=dhs&releaseid=R86322&SystemID=PLX_PNT_CEL_SX270N&servicetag=&os=WW1&osl=en&deviceid=162&devlib=0&typecnt=0&vercnt=5&catid=-1&impid=-1&formatcnt=1&libid=1&fileid=113073

i have xp on my drive but i just tell it to boot of the network and set the WOL for the nic also.
For a Current List of Plug and Play Capture Cards/Devices
http://wiki.linuxmce.org/index.php/Capture_Cards