Author Topic: Setting up new hardware  (Read 2144 times)

cybernard

  • Regular Poster
  • **
  • Posts: 24
    • View Profile
Setting up new hardware
« on: May 08, 2008, 03:58:15 pm »
The process of setting up new hardware seems particularly difficult, especially considering how easy everything else is configure.  I am trying to setup a cell phone over bluetooth.  The system seems to know its there, but I can tell how it configured it and what parts of the phone it recognized.  Using windows I know the phone has at least 4, if not 5, child devices.  However, I can't tell if LinuxMCE has found any of these devices.

I have gone through ALL the web configure screens, and end up on the one with device piping on it.  I can't decided whether I should pipe "Bluetooth Dongle" directly to "phone", or whether I should ignore the phone and map "Bluetooth Donlge" to each one the the child device separately.  For example, the phone has a direct bluetooth serial port that support the standard AT command set plus additional command set that allow sync of other phone data such as contacts.  It also allows remote dialing.  (ATDT)  On another screen when I select Bluetooth the only choices it offers are Audio and Video and I don't want either of those right now.  Do I map "bluetooth dongle" to "serial port" completely ignoring the cell's phones modem??  Should I be doing device piping at all??

My gut instinct is that all the choice I made were wrong and I am completely on the wrong track and just don't know it.

There should be a screen where I can say USB connects to bluetooth dongle connects to cell phone and has these child devices.  It would be even better if it was plug and play, if windows and enumerate child devices automatically, it can be emulated on another OS.

help?? :(

Also when windows shares are detected they just say windows share instead of what the share name is and what server they are on.  Therefore I can not provide valid credentials without using trail and error method.

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5501
  • DOES work for LinuxMCE.
    • View Profile
Re: Setting up new hardware
« Reply #1 on: May 09, 2008, 01:29:44 pm »
currently, cell phone detection is only for usage with the mobile orbiter software.

The following phone types are supported:

* Symbian S60 v1 v2
* Windows Mobile Smartphone 2003
* Windows Mobile Smartphone 2005
* Hari's JavaMO code for compliant J2ME phones (JSR082/MIDP 2.0/CIDC 1.1)

As such, any additional functionality, must be coded into Bluetooth_Dongle.

-Thom

cybernard

  • Regular Poster
  • **
  • Posts: 24
    • View Profile
Re: Setting up new hardware
« Reply #2 on: May 09, 2008, 03:03:07 pm »
I went to the device template screen.
I selected bluetooth, hit filter and it said 13 choice remain.  I hit the other drop down and only 1 choice actually remains. Is this correct?
Should I have selected "Phones" because the bridge device is the phone??
Should I have selected "Generic Serial Device" or some silimiliar designation because the final device is a serial port?
Also "Soft Phones" and "Softphones" also look like possiblilities.  Maybe even a "Virtual Device"??
After examining the choices "Soft Phones" and bluetooth seem to be the best options.
Do I want Bluetooth because its attach bluetooth, or "Soft Phones" because the device is a phone??  The bluetooth dongle its self seems already configured, am I right???

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5501
  • DOES work for LinuxMCE.
    • View Profile
Re: Setting up new hardware
« Reply #3 on: May 09, 2008, 03:11:13 pm »
what you're wanting does not exist yet. If you have attached the bluetooth dongle, then the necessary code for handling the low level bluetooth communications was downloaded and installed.

You need to look at the Bluetooth_Dongle code in src/ and see how it works. But more importantly, you need to study the programmers guide on the wiki, to get an overall view of the system. It IS incomplete, but it should get you started.

-Thom

cybernard

  • Regular Poster
  • **
  • Posts: 24
    • View Profile
Re: Setting up new hardware
« Reply #4 on: May 09, 2008, 03:35:28 pm »
Read the main page working on the subpages.
DCEGen can not find its templates or output directory
I also tried -u root -p <password>

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5501
  • DOES work for LinuxMCE.
    • View Profile
Re: Setting up new hardware
« Reply #5 on: May 09, 2008, 03:47:18 pm »
to run DCEGen, you need to have checked out and built the source tree.

mkdir -p /home/src
cd /home/src
apt-get install subversion
svn co http://svn.linuxmce.org/pluto/branches/charon-merge/
cd charon-merge
./configure
make
(enter your password for the linuxmce user when prompted.)

once this has completed (it may not build completely, that's okay, but in the process it installs the things you need),
cd src/DCEGen
make bin

and then you can use DCEGen by

./dcegen -d <device_template_to_make> .. this must already have been defined in your database, via the web admin tool.

-Thom

cybernard

  • Regular Poster
  • **
  • Posts: 24
    • View Profile
Re: Setting up new hardware
« Reply #6 on: May 09, 2008, 08:26:30 pm »
Did the up to the DCEGen part.

Went to Device template screen
Selected Motorola
and the Generic serial device

Then pick device and a new screen open up!!!

Ok, so far how horribly have I screwed up???

The phone has:

com port
File Transfer(Obex)
Imaging Responder
Object push (Obex)
Audio port (of some kind)

Am I supposed to create a motorola cell phone device and then create 4 or more children??
Am I supposed to create a new device template for each of what I call children???

For the manufacture am I supposed to use Motorola or some determine the manufacture of each sub-device.
Please help me answer some of these questions on the "edit device template screen".

Or what programs do I run to get the neccary info?


tschak909

  • LinuxMCE God
  • ****
  • Posts: 5501
  • DOES work for LinuxMCE.
    • View Profile
Re: Setting up new hardware
« Reply #7 on: May 09, 2008, 08:35:18 pm »
this is where you start doing some research.

-Thom

cybernard

  • Regular Poster
  • **
  • Posts: 24
    • View Profile
Re: Setting up new hardware
« Reply #8 on: May 09, 2008, 09:13:28 pm »
Research found....

Ok.  I googled and hunt and found hcidump.
hcidump is equilivant to tcpdump but for bluetooth

I have attached said file
Now I have lots of data, how do I use it?

I apologize in advance for dump in the form, but the attachment function does not work.
The file has been trimmed to fit.
==========================================================
HCI sniffer - Bluetooth packet analyzer ver 1.39

> ACL data: handle 11 flags 0x02 dlen 120
    L2CAP(d): cid 0x0040 len 116 [psm 1]
        SDP SSA Rsp: tid 0x4 len 0x6f
          count 108
          record #0
              aid 0x0000 (SrvRecHndl)
                 uint 0x0
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x1000 (SDServer) >
              aid 0x0002 (SrvRecState)
                 uint 0x1
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0001 (SDP) > >
              aid 0x0005 (BrwGrpList)
                 < uuid-16 0x1002 (PubBrwsGrp) >
              aid 0x0009 (BTProfileDescList)
                 < < uuid-16 0x1000 (SDServer) uint 0x100 > >
              aid 0x0200 (VersionNumList)
                 < uint 0x1000 >
              aid 0x0201 (SrvDBState)
                 uint 0x1
          record #1
              aid 0x0000 (SrvRecHndl)
                 uint 0x10001
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x1103 (DUN) >
              aid 0x0002 (SrvRecState)
                 uint 0x1
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0x1 > >
              aid 0x0005 (BrwGrpList)
                 < uuid-16 0x1002 (PubBrwsGrp) >
              aid 0x0006 (LangBaseAttrIDList)
                 < uint 0x656e uint 0x6a uint 0x100 uint 0x6672 uint 0x6a uint 0xc800 uint 0x6573 uint 0x6a uint 0xc803 uint 0x7074 uint 0x6a uint 0xc806 >
              aid 0x0009 (BTProfileDescList)
                 < < uuid-16 0x1103 (DUN) uint 0x100 > >
              aid 0x0100 (SrvName)
                 str "Dialup Networking Gateway"
              aid 0x0101 (SrvDesc)
                 str "Dialup Networking Gateway"
              aid 0x0102 (ProviderName)
                 str "/a/mobile/system/cl.gif"
              aid 0x0201 (SrvDBState)
                 < uint 0x3002 >
              aid 0x0202 (unknown)
                 < uint 0x22b8 >
              aid 0xc800 (unknown)
                 str 50 61 73 73 65 72 65 6c 6c 65 20 64 27 61 63 63 c3 a8 73 20 72 c3 a9 73 65 61 75 20 c3 a0 20 64 69 73 74 61 6e
              aid 0xc801 (unknown)
                 str 50 61 73 73 65 72 65 6c 6c 65 20 64 27 61 63 63 c3 a8 73 20 72 c3 a9 73 65 61 75 20 c3 a0 20 64 69 73 74 61 6e
              aid 0xc802 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc803 (unknown)
                 str "Portal de acceso a red"
              aid 0xc804 (unknown)
                 str "Portal de acceso a red"
              aid 0xc805 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc806 (unknown)
                 str "Discagem de Rede Gateway"
              aid 0xc807 (unknown)
                 str "Discagem de Rede Gateway"
              aid 0xc808 (unknown)
                 str "/a/mobile/system/cl.gif"
          record #2
              aid 0x0000 (SrvRecHndl)
                 uint 0x10003
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x1112 (Headset AG) uuid-16 0x1203 (Audio) >
              aid 0x0002 (SrvRecState)
                 uint 0x1
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0x3 > >
              aid 0x0005 (BrwGrpList)
                 < uuid-16 0x1002 (PubBrwsGrp) >
              aid 0x0006 (LangBaseAttrIDList)
                 < uint 0x656e uint 0x6a uint 0x100 uint 0x6672 uint 0x6a uint 0xc800 uint 0x6573 uint 0x6a uint 0xc803 uint 0x7074 uint 0x6a uint 0xc806 >
              aid 0x0009 (BTProfileDescList)
                 < < uuid-16 0x1108 (Headset) uint 0x100 > >
              aid 0x0100 (SrvName)
                 str "Voice Gateway"
              aid 0x0101 (SrvDesc)
                 str "Headset Audio Gateway"
              aid 0x0102 (ProviderName)
                 str "/a/mobile/system/cl.gif"
              aid 0xc800 (unknown)
                 str "Passerelle vocale"
              aid 0xc801 (unknown)
                 str "Passerelle casque audio"
              aid 0xc802 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc803 (unknown)
                 str "Portal de voz"
              aid 0xc804 (unknown)
                 str 50 6f 72 74 61 6c 20 61 75 64 c3 ad 66 6f 6e 6f
              aid 0xc805 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc806 (unknown)
                 str "Gateway de Voz"
              aid 0xc807 (unknown)
                 str "Audio fone de ouvido Gateway"
              aid 0xc808 (unknown)
                 str "/a/mobile/system/cl.gif"
          record #3
              aid 0x0000 (SrvRecHndl)
                 uint 0x10007
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x111f (Handsfree AG) uuid-16 0x1203 (Audio) >
              aid 0x0002 (SrvRecState)
                 uint 0x1
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0x7 > >
              aid 0x0005 (BrwGrpList)
                 < uuid-16 0x1002 (PubBrwsGrp) >
              aid 0x0006 (LangBaseAttrIDList)
                 < uint 0x656e uint 0x6a uint 0x100 uint 0x6672 uint 0x6a uint 0xc800 uint 0x6573 uint 0x6a uint 0xc803 uint 0x7074 uint 0x6a uint 0xc806 >
              aid 0x0009 (BTProfileDescList)
                 < < uuid-16 0x111e (Handsfree) uint 0x101 > >
              aid 0x0100 (SrvName)
                 str "Handsfree Voice Gateway"
              aid 0x0101 (SrvDesc)
                 str "Handsfree Voice Gateway"
              aid 0x0102 (ProviderName)
                 str "/a/mobile/system/cl.gif"
              aid 0x0301 (SuppDataStoresList)
                 uint 0x1
              aid 0x0311 (SuppFeatures)
                 uint 0x1f
              aid 0xc800 (unknown)
                 str "Passerelle vocale mains libres"
              aid 0xc801 (unknown)
                 str "Passerelle vocale mains libres"
              aid 0xc802 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc803 (unknown)
                 str "Portal de voz a manos libres"
              aid 0xc804 (unknown)
                 str "Portal de voz a manos libres"
              aid 0xc805 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc806 (unknown)
                 str "Gateway Viva Voz"
              aid 0xc807 (unknown)
                 str "Gateway Viva Voz"
              aid 0xc808 (unknown)
                 str "/a/mobile/system/cl.gif"
          record #4
              aid 0x0000 (SrvRecHndl)
                 uint 0x10008
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x1105 (OBEXObjPush) >
              aid 0x0002 (SrvRecState)
                 uint 0x1
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0x8 > <
                 uuid-16 0x0008 (OBEX) > >
              aid 0x0005 (BrwGrpList)
                 < uuid-16 0x1002 (PubBrwsGrp) >
              aid 0x0006 (LangBaseAttrIDList)
                 < uint 0x656e uint 0x6a uint 0x100 uint 0x6672 uint 0x6a uint 0xc800 uint 0x6573 uint 0x6a uint 0xc803 uint 0x7074 uint 0x6a uint 0xc806 >
              aid 0x0009 (BTProfileDescList)
                 < < uuid-16 0x1105 (OBEXObjPush) uint 0x100 > >
              aid 0x0100 (SrvName)
                 str "OBEX Object Push"
              aid 0x0101 (SrvDesc)
                 str "OBEX Object Push"
              aid 0x0102 (ProviderName)
                 str "/a/mobile/system/cl.gif"
              aid 0x0303 (SuppFormatsList)
                 < uint 0xff >
              aid 0xc800 (unknown)
                 str "OBEX Object Push"
              aid 0xc801 (unknown)
                 str "OBEX Object Push"
              aid 0xc802 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc803 (unknown)
                 str "OBEX Object Push"
              aid 0xc804 (unknown)
                 str "OBEX Object Push"
              aid 0xc805 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc806 (unknown)
                 str "OBEX Object Push"
              aid 0xc807 (unknown)
                 str "OBEX Object Push"
              aid 0xc808 (unknown)
                 str "/a/mobile/system/cl.gif"
          record #5
              aid 0x0000 (SrvRecHndl)
                 uint 0x10009
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x1106 (OBEXObjTrnsf) >
              aid 0x0002 (SrvRecState)
                 uint 0x1
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0x9 > <
                 uuid-16 0x0008 (OBEX) > >
              aid 0x0005 (BrwGrpList)
                 < uuid-16 0x1002 (PubBrwsGrp) >
              aid 0x0006 (LangBaseAttrIDList)
                 < uint 0x656e uint 0x6a uint 0x100 uint 0x6672 uint 0x6a uint 0xc800 uint 0x6573 uint 0x6a uint 0xc803 uint 0x7074 uint 0x6a uint 0xc806 >
              aid 0x0009 (BTProfileDescList)
                 < < uuid-16 0x1106 (OBEXObjTrnsf) uint 0x100 > >
              aid 0x0100 (SrvName)
                 str "OBEX File Transfer"
              aid 0x0101 (SrvDesc)
                 str "OBEX File Transfer"
              aid 0x0102 (ProviderName)
                 str "/a/mobile/system/cl.gif"
              aid 0xc800 (unknown)
                 str "Transfert de fichier OBEX"
              aid 0xc801 (unknown)
                 str "Transfert de fichier OBEX"
              aid 0xc802 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc803 (unknown)
                 str "Transferencia de archivo OBEX "
              aid 0xc804 (unknown)
                 str "Transferencia de archivo OBEX "
              aid 0xc805 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc806 (unknown)
                 str 4f 42 45 58 20 54 72 61 6e 73 66 65 72 c3 aa 6e 63 69 61 20 64 65 20 61 72 71 75 69 76 6f
              aid 0xc807 (unknown)
                 str 4f 42 45 58 20 54 72 61 6e 73 66 65 72 c3 aa 6e 63 69 61 20 64 65 20 61 72 71 75 69 76 6f
              aid 0xc808 (unknown)
                 str "/a/mobile/system/cl.gif"
          record #6
              aid 0x0000 (SrvRecHndl)
                 uint 0x1000a
              aid 0x0001 (SrvClassIDList)
                 < uuid-16 0x111b (ImagingResp) >
              aid 0x0002 (SrvRecState)
                 uint 0x1
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0xa > <
                 uuid-16 0x0008 (OBEX) > >
              aid 0x0005 (BrwGrpList)
                 < uuid-16 0x1002 (PubBrwsGrp) >
              aid 0x0006 (LangBaseAttrIDList)
                 < uint 0x656e uint 0x6a uint 0x100 uint 0x6672 uint 0x6a uint 0xc800 uint 0x6573 uint 0x6a uint 0xc803 uint 0x7074 uint 0x6a uint 0xc806 >
              aid 0x0009 (BTProfileDescList)
                 < < uuid-16 0x111a (Imaging) uint 0x100 > >
              aid 0x0100 (SrvName)
                 str "Image Push"
              aid 0x0101 (SrvDesc)
                 str "Image Push"
              aid 0x0102 (ProviderName)
                 str "/a/mobile/system/cl.gif"
              aid 0x0310 (SuppCapabilities)
                 uint 0x1
              aid 0x0311 (SuppFeatures)
                 uint 0x1
              aid 0x0312 (SuppFunctions)
                 uint 0xb
              aid 0x0313 (SuppTotalCapacity)
                 uint 0x5000000001000a
              aid 0xc800 (unknown)
                 str 49 6d 61 67 65 20 c3 a0 20 63 68 61 72 67 65 6d 65 6e 74 20 64 69 72 65 63 74
              aid 0xc801 (unknown)
                 str 49 6d 61 67 65 20 c3 a0 20 63 68 61 72 67 65 6d 65 6e 74 20 64 69 72 65 63 74
              aid 0xc802 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc803 (unknown)
                 str "Imagen push"
              aid 0xc804 (unknown)
                 str "Imagen push"
              aid 0xc805 (unknown)
                 str "/a/mobile/system/cl.gif"
              aid 0xc806 (unknown)
                 str "Transf. de Imagem"
              aid 0xc807 (unknown)
                 str "Transf. de Imagem"
              aid 0xc808 (unknown)
                 str "/a/mobile/system/cl.gif"
          cont 00
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 3 scid 0x0041
> ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0
      Connection successful
< ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
      MTU 1013
> ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
      MTU 1506
< ACL data: handle 11 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 4
      Success
      MTU 1506
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 4
      Success
      MTU 1013
< ACL data: handle 11 flags 0x02 dlen 8
    L2CAP(d): cid 0x0041 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> ACL data: handle 11 flags 0x02 dlen 8
    L2CAP(d): cid 0x0041 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 11 flags 0x02 dlen 18
    L2CAP(d): cid 0x0041 len 14 [psm 3]
      RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
      dlci 38 frame_type 0 credit_flow 15 pri 7 ack_timer 0
      frame_size 1008 max_retrans 0 credits 7
> ACL data: handle 11 flags 0x02 dlen 8
    L2CAP(d): cid 0x0041 len 4 [psm 3]
      RFCOMM(s): DM: cr 1 dlci 38 pf 1 ilen 0 fcs 0x2f
< ACL data: handle 11 flags 0x02 dlen 8
    L2CAP(d): cid 0x0041 len 4 [psm 3]
      RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0041 scid 0x0041
> ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0041 scid 0x0041
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0041
> ACL data: handle 11 flags 0x02 dlen 14
    L2CAP(s): Command rej: reason 2 dcid 0x0041 scid 0x0041
      Invalid CID in request
< HCI Command: Inquiry (0x01|0x0001) plen 5
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Number of Completed Packets (0x13) plen 5
< HCI Command: Disconnect (0x01|0x0006) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Disconn Complete (0x05) plen 4
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Command Complete (0x0e) plen 252
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Command Complete (0x0e) plen 252
> HCI Event: Inquiry Complete (0x01) plen 1
< HCI Command: Inquiry (0x01|0x0001) plen 5
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
< HCI Command: Create Connection (0x01|0x0005) plen 13
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Inquiry Cancel (0x01|0x0002) plen 0
> HCI Event: Command Complete (0x0e) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Command Complete (0x0e) plen 252
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Max Slots Change (0x1b) plen 3
> HCI Event: Command Complete (0x0e) plen 252
< HCI Command: Read Local Name (0x03|0x0014) plen 0
> HCI Event: Remote Name Req Complete (0x07) plen 255
> HCI Event: Command Complete (0x0e) plen 252
> ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
      Connection successful
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 1024
< ACL data: handle 11 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      Success
      MTU 1024
> ACL data: handle 11 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
< ACL data: handle 11 flags 0x02 dlen 24
    L2CAP(d): cid 0x0040 len 20 [psm 1]
        SDP SSA Req: tid 0x0 len 0xf
          pat uuid-16 0x1002 (PubBrwsGrp)
          max 65535
          aid(s) 0x0000 - 0xffff
          cont 00

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5501
  • DOES work for LinuxMCE.
    • View Profile
Re: Setting up new hardware
« Reply #9 on: May 09, 2008, 09:20:52 pm »
you now need to spend a LOT of time studying src/Bluetooth_Dongle ..... thati s where to start.. spider out from there.

-Thom

cybernard

  • Regular Poster
  • **
  • Posts: 24
    • View Profile
Re: Setting up new hardware
« Reply #10 on: May 10, 2008, 07:54:20 pm »
Completely out of the blue, the system requested a voice gateway with my phone.
Said yes of course.
Did a pin exchange
Requested an OBEX.
I told the cell phone to accept all.
 Now what???

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5501
  • DOES work for LinuxMCE.
    • View Profile
Re: Setting up new hardware
« Reply #11 on: May 10, 2008, 09:09:11 pm »
That's not a voice gateway. That's the system finding your phone and asking to push the Mobile Orbiter software to it.

You need to have one of the suppored phones by LinuxMCE to use the mobile orbiter software.

-Thom

cybernard

  • Regular Poster
  • **
  • Posts: 24
    • View Profile
Re: Setting up new hardware
« Reply #12 on: May 11, 2008, 06:36:34 am »
The 2 items I said were not the same.
My cell actually dceroute-0 wants create a Voice Gateway with it.
Allow or Deny
dceroute-0 now actually appear under Handsfree devices.

cybernard

  • Regular Poster
  • **
  • Posts: 24
    • View Profile
Re: Setting up new hardware
« Reply #13 on: May 12, 2008, 01:58:08 pm »
PS.

dceroute-0 shows up under hands free, but is unusable.
It also shows up under device history.

I studied the docs and bluetooth_dongle.  If I understand the documentation and source code correctly all the messages the bluetooth fires off are immediately dumped into the dceroute message queue in hopes one of the modules watching the queue knows how to process the data.  The rest of the c++ code seems to be error trapping and a few odds and ends.