Author Topic: ZWave API  (Read 113979 times)

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: ZWave API
« Reply #105 on: August 31, 2008, 06:15:22 pm »
ps: btw, the ACT wall dimmer with double paddle is so loud (humming sound) that even my girlfriend noticed it in the sleeping room. I'm really looking forward to the merten units..

These are nearly noiseless. With your ear against a superdimmer unit, you can hear a slight hum. Same with the relais switch units (not surprising since it contains a relay).

I don't know about ACT units, but merten units have a separate transmitter and receiver in their own software. I hope this will be the case in the new zwave api, too!

Hari's new code is fully bi-directional by the way and is a real 'quantum leap' in capability for LinuxMCE - for first time we have a really fully capable ZWave driver thanks to Hari. Give it a try... you'll love it!

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

hari

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 2428
    • View Profile
    • ago control
Re: ZWave API
« Reply #106 on: August 31, 2008, 06:18:52 pm »
we still miss thermostat and multisensor support. Multisensor will come soon, but I still search somebody with a wired Z-Wave thermostat.

best regards,
Hari

btw: domodude: what do you mean with seperate receiver and transmitter?
rock your home - http://www.agocontrol.com home automation

thoweiss

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: ZWave API
« Reply #107 on: September 04, 2008, 09:49:15 am »
Something new about the Triklestar Products?

Does anybody know a good shop to by eropean z-Wave Products?

I would like to start in oktober november with z-wave...

Regards,

Thorsten.

[EDIT]

The z-Wave4you shop actuallay no longer online, don't know whats happend...
From the Triklestar sales i have the information that theire Product will be available in October 08....
 [/EDIT]


« Last Edit: September 09, 2008, 01:07:43 pm by thoweiss »

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: ZWave API
« Reply #108 on: September 04, 2008, 12:35:34 pm »
Something new about the Triklestar Products?

Does anybody know a good shop to by eropean z-Wave Products?

I would like to start in oktober november with z-wave...

Regards,

Thorsten.

We have not purchased any products from this company but they seem to be very helpful and well informed too;

http://www.zwave4u.de

All the best

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

Zaerc

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 2256
  • Department of Redundancy Department.
    • View Profile
Re: ZWave API
« Reply #109 on: September 04, 2008, 03:50:28 pm »
"Change is inevitable. Progress is optional."
-- Anonymous


hari

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 2428
    • View Profile
    • ago control
Re: ZWave API
« Reply #110 on: September 08, 2008, 10:19:11 pm »
added drapes support, tested with the merten blinds switch.

best regards,
Hari
rock your home - http://www.agocontrol.com home automation

hari

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 2428
    • View Profile
    • ago control
Re: ZWave API
« Reply #111 on: September 09, 2008, 09:30:45 pm »
A while ago you mentioned a package -- are you still planning this?
no package yet, have to dig deeper into "MakeRelease".

For now, I can provide a 32 bit binary for 0710: http://vt100.at/files/ZWave-0.0.1-0710-32bit.bz2

best regards,
Hari
rock your home - http://www.agocontrol.com home automation

hari

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 2428
    • View Profile
    • ago control
Re: ZWave API
« Reply #112 on: September 09, 2008, 10:13:33 pm »
Does anybody know a good shop to by eropean z-Wave Products?

I have in the past mentioned voltus.de to buy Merten Connect z-wave gear. They have a low price, but their customer service (with which I unfortunately have quite a bit of experience) is abominable.... :(

possy ordered some Merten stuff at elektronetshop.de, took them some days (as stated in the shop) but cheaper than voltus.. (thanks possy :-) )

best regards,
Hari
rock your home - http://www.agocontrol.com home automation

Zaerc

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 2256
  • Department of Redundancy Department.
    • View Profile
Re: ZWave API
« Reply #113 on: September 09, 2008, 11:32:02 pm »
Please add shops to http://wiki.linuxmce.org/index.php/Where_to_Buy along with your experience with them.
"Change is inevitable. Progress is optional."
-- Anonymous


totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: ZWave API
« Reply #114 on: September 28, 2008, 11:15:47 am »
short update:
Playing with LMCE being the primary controller and SIS mode (Node id server). I already can add slave devices and controllers to the network with the dongle. Ideally all remote controllers should work as inclusion controllers in this scenario. Sadly enough the ZTH100/200 does not seem to support the inclusion controller mode and only is working as secondary controller for now (Zaerc suggested a long usb extension cord to be able to add all my devices :-) )

I'm trying to get hold of a Tricklestar remote, they state SIS support on the page and it uses newer library versions. And it should be available in Europe (868Mhz)

The SIS mode seems to be the best choice for a Z-Wave network. Some devices like the RA-Plus-W only work in a network with SIS. And we get the node information frame at the time of inclusion, so we can catch battery powered devices that don't send out a broadcast wake up event.

best regards,
Hari

Hi Hari,

I met with Bernard on Friday very briefly. He left me with a 'Golden' pre-production Tricklestar ZWave stick :-) !! What nice guy by the way and he has a mountain of ZWave experience together with years of experience in the home automation business. Anyway i will test the ZWave stick with your driver on Monday (I ran out of the office on Friday without picking up some ZWave kit to test it with!).

Bernard has Fedex'd me a Tricklestar ZWave remote... should get that Mon/Tues :-)... and I have asked him to send you a unit too.

If your available during Monday, even briefly we could test the ZWave stick on one of our test Cores... let me know if you have some time maybe at lunch?

All the best

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

hari

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 2428
    • View Profile
    • ago control
Re: ZWave API
« Reply #115 on: September 28, 2008, 03:01:58 pm »
Bernard has Fedex'd me a Tricklestar ZWave remote... should get that Mon/Tues :-)... and I have asked him to send you a unit too.
he promised one for me some weeks ago.

Quote
If your available during Monday, even briefly we could test the ZWave stick on one of our test Cores... let me know if you have some time maybe at lunch?
Monday will be pretty busy. But I'd assume the stick will work out of the box, if it still uses that pl2303 chipset.

best regards,
Hari
rock your home - http://www.agocontrol.com home automation

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: ZWave API
« Reply #116 on: September 28, 2008, 05:58:05 pm »
Bernard has Fedex'd me a Tricklestar ZWave remote... should get that Mon/Tues :-)... and I have asked him to send you a unit too.
he promised one for me some weeks ago.

Quote
If your available during Monday, even briefly we could test the ZWave stick on one of our test Cores... let me know if you have some time maybe at lunch?
Monday will be pretty busy. But I'd assume the stick will work out of the box, if it still uses that pl2303 chipset.

best regards,
Hari

Hi Hari,

I think Bernard assumed the sample remote we purchased would be 'shared' with you - a simple mistake. Anyway i have ordered a unit for you and it should be with you by Wednesday/Thursday I expect.

No problem re Monday. I'll update you on the testing either here or on irc during Monday.

All the best

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

thoweiss

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: ZWave API
« Reply #117 on: November 07, 2008, 07:31:29 am »
The triclestar Z-Wave USB-Adapter is now available in the onlinestore http://www.zwave4u.de/.

My question is:

Will this adapter work with the LMCE Z-Wave libary?

Regards Thorsten.

nite_man

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1019
  • Want to work with LinuxMCE
    • View Profile
    • Smart Home Blog
Re: ZWave API
« Reply #118 on: November 07, 2008, 09:10:52 am »
I'm also would like to know that. Because I found that only Seluxit viaSens 100 can work with the latest Z-Wave implementation.  Tricklestar USB Adapter looks nice and it's cheaper twice :)

I found the Seluxit Multisensor which offers motion detection and light level, temperature and humidity measurements. Does somebody test it under LMCE? I suppose that it should work well with Seluxit viaSens 100 PC adapter. But not sure that it'll work with LMCE.

BTW, zwave4u looks very attractive. It offers a lot Z-Wave devices with reasonable price and ships to EU.
Michael Stepanov,
My setup: http://wiki.linuxmce.org/index.php/User:Nite_man#New_setup
Russian LinuxMCE community: http://linuxmce.ru

hari

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 2428
    • View Profile
    • ago control
Re: ZWave API
« Reply #119 on: November 07, 2008, 09:30:41 am »
the tricklestar works, I've tested it myself, but from what I know it is not yet available.

The Seluxit Multisensor will be supported soon, it is not yet released.

Yeah zwave4u looks good.

br, Hari
rock your home - http://www.agocontrol.com home automation