Author Topic: System Specs for LinuxMCE box?  (Read 12077 times)

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: System Specs for LinuxMCE box?
« Reply #15 on: November 11, 2007, 11:20:08 am »
I'm not that skilled in editing the wiki either, I just look at other edit pages and try things as I go along, the "Show preview" button usually comes in handy.  But I guess some directions on adding new stuff is overdue a bit as it's not so intuitive, and I never realized this is one of the things keeping people from adding stuff. :P  If this is useful I'll put it in the wiki as well.

To add a new page you can just make up a new url, like this: http://wiki.linuxmce.org/index.php/Name of the page you want to add (the wiki will replace spaces with underscores automaticly) and edit it.

For hardware I think the best convention is: "Manufacturer_Model-Type-Whatever", in your case that would be: http://wiki.linuxmce.org/index.php/MSI_MS-7329.  To categorize the page so that it's easy to find, you can put this at the top of the page:
Code: [Select]
[[Category: Hardware]]
[[Category: Mainboards]]

And below that you can put anything you feel is relevant.  Here are a few things I figured out so far:

==This is how you can do a section header==
===Which can be nested by adding more equal signs===

*This is an unordered (bullit) list.
**These can also be nested

#This is an ordered (numbered) list
##I think these can be nested as well

:This will be indented
::Indented more

 Lines starting with a space will be "preformatted", and placed in one of those typical dotted boxes.

''Italic text''
'''bold text'''
'''''italic and bold'''''

Urls are automaticly recognized, but there are more possibilities.  For example:
Code: [Select]
http://some.domain/page.html  shows the URL 'as is'
[http://some.domain/page.html]  shows up as an increasing number
[http://some.domain/page.html alternative text]  shows up as "alternative text"

[[other wiki page]] link to other_wiki_page, shows as "other wiki page"
[[other wiki page|alternative text]] link to other_wiki_page, shows as "alternative text"

<nowiki>this will stop the wiki from applying formatting, useful if you don't want url's turned into links for instance</nowiki>

Alternatively you can also use the standard HTML tags.  I hope I got all that right and that it's enough to get you started.  The headings will be put into a table of contents at the top, but only when the page gets long enough I think. 

Hey thanks Zaerc... just what I needed ;-)
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

colinjones

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 3003
    • View Profile
Re: System Specs for LinuxMCE box?
« Reply #16 on: November 11, 2007, 12:25:28 pm »
Totallymaxed - sorry, yeah saw that after I posted, haven't read it closely, but there was a diagram of a panel of outputs that didn't include the SP opt, but further down it talks about them (and even SP in [optional]) ... not sure why. But glad to hear that it has it anyway!

On the HDMI - I know that the video works fine, but I have read on the forums that the audio through HDMI doesn't - and that post also mentioned Realtek and that the Linux driver probably needs this implemented. Are you saying that you can get digital audio out of the HDMI interface out of the box with LMCE? Pushing my luck here.... but .... what about the CEC control interface?
Col

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: System Specs for LinuxMCE box?
« Reply #17 on: November 11, 2007, 12:40:36 pm »
Totallymaxed - sorry, yeah saw that after I posted, haven't read it closely, but there was a diagram of a panel of outputs that didn't include the SP opt, but further down it talks about them (and even SP in [optional]) ... not sure why. But glad to hear that it has it anyway!

On the HDMI - I know that the video works fine, but I have read on the forums that the audio through HDMI doesn't - and that post also mentioned Realtek and that the Linux driver probably needs this implemented. Are you saying that you can get digital audio out of the HDMI interface out of the box with LMCE? Pushing my luck here.... but .... what about the CEC control interface?
Col

Audio over the HDMI does seem to work... but also sometimes it does not :-(

We're not sure exactly why that is yet. Hopefully we'll have some more info on this next week and I'll post an update as soon as I have any news. Clearly audio over HDMI is intended to work and i would not hold off buying an HDMI enabled board.

As to CEC... we have not tested that. but I am fairly certain that even if the physical HDMI interface is capabile of it (I think it is) then lmce has no support for it currently... again I'll post some feedback on that asap next week ;-)
« Last Edit: November 11, 2007, 12:44:59 pm by totallymaxed »
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

1audio

  • Addicted
  • *
  • Posts: 552
    • View Profile
Re: System Specs for LinuxMCE box?
« Reply #18 on: November 18, 2007, 10:41:43 pm »
I got the file finally, it was very slow from here. Maybe we should push MSI to make that board available. They have an office close to me. Is the combo package reasonably priced? Maybe we can get Fiire to offer it preconfigured.

Zaerc

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 2256
  • Department of Redundancy Department.
    • View Profile
Re: System Specs for LinuxMCE box?
« Reply #19 on: November 19, 2007, 02:50:11 am »
Hey thanks Zaerc... just what I needed ;-)

You're more then welcome, and thank you for adding it, not to mention all your other effort.

I have added it to the wiki editing help, and I saw that Matthew has been so kind to expand it a bit so thank you as well.
"Change is inevitable. Progress is optional."
-- Anonymous


1audio

  • Addicted
  • *
  • Posts: 552
    • View Profile
Re: System Specs for LinuxMCE box?
« Reply #20 on: November 19, 2007, 07:20:43 am »
Totallymaxed-

Did you get the analog Audio output running in 7.1 mode on the Media Live box? And what is on the VFD?


totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: System Specs for LinuxMCE box?
« Reply #21 on: November 19, 2007, 10:25:06 am »
Totallymaxed-

Did you get the analog Audio output running in 7.1 mode on the Media Live box? And what is on the VFD?



Hi there,

I'll check the 7.1 analog audio... I'm pretty sure we have the SP-DIF working, and analog stereo. The VFD is something we're working on. Interestingly there is support for the VFD in 0704 and I know that the front panel transport control buttons do work perfectly. So far we have not got anything onto the display. I'll find out where we are at on that though and post an update later.

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

colinjones

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 3003
    • View Profile
Re: System Specs for LinuxMCE box?
« Reply #22 on: December 17, 2007, 01:36:50 am »
Totallymaxed -

Any update on this MSI board? How did you go with audio and CEC? What are your thoughts on the 7050PV from NVidia - looking at the specs they seem to be saying that this is the minimum for HD/1080p for Blu ray and HDDVD with HCPI... does that sound right?

As a result I was looking at the MSI K9NGM3(or 2 or 4!) which has 7050PV and nForce 630a, which an HDMI connector. Do you think that is necessary/beneficial or just stick with the 7329? Do you think that it is a problem that the K9NGM3 is only AM2 not AM2+ and so only has HyperTranport2.0 (1G rather than 2.6G that AM2+ supports)?

Really keen to get the best HDMI board first time without spending a lot of money!

1audio

  • Addicted
  • *
  • Posts: 552
    • View Profile
Re: System Specs for LinuxMCE box?
« Reply #23 on: December 17, 2007, 01:59:50 am »
CEC support won't be in PC's for some time. And existing boards with HDMI don't have the hardware. Like all HDMI features the CEC implementation is broken in the first release and badly implemented by most vendors. It probably won't work well enough to be useable across vendors before HDMI 1.4.

I have heard that the Nvidia linux drivers don't support sound on HDMI yet. If the board is hard wired to work that won't matter but if not it may be a while.

colinjones

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 3003
    • View Profile
Re: System Specs for LinuxMCE box?
« Reply #24 on: December 17, 2007, 02:07:39 am »
1audio - understood, at the same time, Andrew said he was looking into some of these aspects a couple of weeks ago... just wondered if he had made any progress.... and more importantly and more generally his views on the boards mentioned .. :)

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: System Specs for LinuxMCE box?
« Reply #25 on: December 17, 2007, 10:36:30 am »
Totallymaxed -

Any update on this MSI board? How did you go with audio and CEC? What are your thoughts on the 7050PV from NVidia - looking at the specs they seem to be saying that this is the minimum for HD/1080p for Blu ray and HDDVD with HCPI... does that sound right?

As a result I was looking at the MSI K9NGM3(or 2 or 4!) which has 7050PV and nForce 630a, which an HDMI connector. Do you think that is necessary/beneficial or just stick with the 7329? Do you think that it is a problem that the K9NGM3 is only AM2 not AM2+ and so only has HyperTranport2.0 (1G rather than 2.6G that AM2+ supports)?

Really keen to get the best HDMI board first time without spending a lot of money!

Hi Colin,

As 1audio says CEC is still a long way off yet... I just wouldn't let that be a factor in your decision. As to which id best... the 7329 or K9NGM3 I really can't say. The 7050 is supported by the drivers in 0710 and as far we can tell works well (on other Mobo's). MSI have targeted the K9NGM3 hardware for high performance 1080i usage... so I would be very suprised if the basic hardware was not up to the job. We have not tested the 7329 at properly at 1080i yet I have to say. But we do not that this MB works well and we have had zero problems with our test units.
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

colinjones

  • Alumni
  • LinuxMCE God
  • *
  • Posts: 3003
    • View Profile
Re: System Specs for LinuxMCE box?
« Reply #26 on: December 17, 2007, 12:02:38 pm »
hmmm.... my problem is that the 7329 just doesn't seem to be available in Australia. Seems the US guys are having difficulty as well. Doing a search finds lots of hits in EU, especially DE and UK... don't suppose Convergent would do exports on these boards would you?! :)

BTW - the CEC is just something I am interested in, by no means is it factored into the decision. It is more about UI2/Alpha, and the performance to do HD. Problem is, nVidia seem to go out of their way to obfuscate their range and make it very difficult to differentiate the chipsets... They push the 7050PV hard as the platform for HD, yet most of the 6xxx series also seem capable, too. It "feels" like there is a dividing line where the lower series can do HD-ish, but peters out at some point just before full 1080i/p/HDDVD/Blu Ray, but is very difficult to quantify where :)

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: System Specs for LinuxMCE box?
« Reply #27 on: December 17, 2007, 12:46:53 pm »
hmmm.... my problem is that the 7329 just doesn't seem to be available in Australia. Seems the US guys are having difficulty as well. Doing a search finds lots of hits in EU, especially DE and UK... don't suppose Convergent would do exports on these boards would you?! :)

BTW - the CEC is just something I am interested in, by no means is it factored into the decision. It is more about UI2/Alpha, and the performance to do HD. Problem is, nVidia seem to go out of their way to obfuscate their range and make it very difficult to differentiate the chipsets... They push the 7050PV hard as the platform for HD, yet most of the 6xxx series also seem capable, too. It "feels" like there is a dividing line where the lower series can do HD-ish, but peters out at some point just before full 1080i/p/HDDVD/Blu Ray, but is very difficult to quantify where :)

For reasons related to indemnity our insurers will not allows us to export to the US currently and we cannot re-sell bare mobo's outside the EEC. So on both counts I'd have to say no... sorry. We could sell you one of our NerveCenter 100's ( see http://wiki.linuxmce.com/index.php/Convergenthome ) but you can probably buy those barebones in OZ for far less money and do the install/setup yourself.
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk