Failed To Regen Orbiter

[Plum]

If have installed LinuxMCE from the 2CD's with no problem onto a MSI speedster A4R motherboard with T2300 core duo laptop processor and 2GB Ram, with the objective of having a low power Core/Hybrid.

The installation seems to go fine and the sound and the UI1 are initially working. I go into the admin wedsite and try to add a device it asks me to regen orbiter and/or reload DCE router, but I always seem to end put with an error message saying that it has 'Failed to Regen Orbiter'(tried to add remote, CCTV capture card and DVB card in different orders all with same results).

I am new to Linux and LinuxMCE and I do not know what to do next as I have tried to install a number of times and always finally end up in the same situation with the 'Failed to Regen Orbitor' - What am I doing wrong?

Thanks in advance for your Help.

[darrenmason]

There should be logs in /var/log/pluto. See if there is one for RegenOrbiter or something like that.
Post relevant bits here if the error messages don't help you.

[Plum]

This is the OrbiterGen.log

10      09/16/07 16:48:53.748           Generation started <0xb5c256f0>
10      09/16/07 16:48:53.761           Locking orbiter before Generating 20 <0x
b5c256f0>
10      09/16/07 16:48:53.761           new orbiter 20 <0xb5c256f0>
10      09/16/07 16:48:53.767           Generating 20 <0xb5c256f0>
10      09/16/07 16:48:53.767           Setting RegenInProgress_set to true for
20 <0xb5c256f0>
10      09/16/07 16:48:53.768           Generating: #20 OnScreen Orbiter <0xb5c2
56f0>
10      09/16/07 16:48:53.768           Building orbiter: 20 inst 33161 <0xb5c25
6f0>
10      09/16/07 16:48:53.791           Use alpha 0 use mask 0 <0xb5c256f0>
01      09/16/07 16:48:53.804           ***Error*** The users table is completel
y empty. <0xb5c256f0>
10      09/16/07 16:48:53.804           Found OSD using size: 1280 1024 <0xb5c25
6f0>
10      09/16/07 16:48:53.804           Translating size: 1280 1024 <0xb5c256f0>
10      09/16/07 16:48:53.805           OrbiterGen::CheckRegen 20 now <1280,1024
,600,640,1,1,00,0,0,0,N,N,,NO_OCG%> was <> <0xb5c256f0>
10      09/16/07 16:48:53.805           new orbiter size was 0 <0xb5c256f0>
10      09/16/07 16:48:53.805           Regenerating all: Orbiter data changed f
rom  to 1280,1024,600,640,1,1,00,0,0,0,N,N,,NO_OCG <0xb5c256f0>
05      09/16/07 16:48:53.928           Warning: No entertainment areas and no r
ooms <0xb5c256f0>
10      09/16/07 16:48:53.940           const 0x814dab8 3319 <0xb5c256f0>
10      09/16/07 16:48:53.963           Generating screen: 3319 ver: 0/N room: 0
 ea: 0, orb: 20 <0xb5c256f0>
10      09/16/07 16:48:53.963           Regenerating:  cached screen not in DB <
0xb5c256f0>
10      09/16/07 16:48:54.071           const 0x8161ec8 5202 <0xb5c256f0>
10      09/16/07 16:48:54.117           const 0x8162bc0 1255 <0xb5c256f0>
10      09/16/07 16:48:54.135           Generating screen: 1255 ver: 0/Y room: 0
 ea: 0, orb: 20 <0xb5c256f0>
10      09/16/07 16:48:54.135           Regenerating:  cached screen not in DB <
0xb5c256f0>
10      09/16/07 16:48:54.253           const 0x81697b0 2431 <0xb5c256f0>
10      09/16/07 16:48:54.271           const 0x816a7d0 2432 <0xb5c256f0>
10      09/16/07 16:48:54.289           const 0x8167838 2433 <0xb5c256f0>
10      09/16/07 16:48:54.307           const 0x8168718 2434 <0xb5c256f0>
10      09/16/07 16:48:54.325           const 0x816c000 2435 <0xb5c256f0>
10      09/16/07 16:48:54.344           const 0x816f120 3286 <0xb5c256f0>
10      09/16/07 16:48:54.362           const 0x816ff60 3410 <0xb5c256f0>
10      09/16/07 16:48:54.380           const 0x8170d10 3409 <0xb5c256f0>
10      09/16/07 16:48:54.397           const 0x8171aa0 3408 <0xb5c256f0>
:

It says that the uswer table is Completely Empty and I have No Entertainment areas and no rooms. But if I go to the Admin website I can see users and rooms??

What do I do next, I have tried installing a number of times and always end up with the same 'Failed to Regen orbiter skin' error. I must be doing something basic incorrectly but I do not know what.

Thanks for the Help