Author Topic: Lockup after first reboot  (Read 3420 times)

Navy2k

  • Newbie
  • *
  • Posts: 4
    • View Profile
Lockup after first reboot
« on: September 13, 2007, 06:02:08 pm »
Hi,

I installed LMCE 0704 last week with a ATI Card and all went fine ( DVD Version)

This Week i got me an nvidia Card (7600 GS AGP) an my system crashed after the first reboot at a point where the Kubuntu-startup-bar was nerly finished.
Suddenly the picture goes cracy and it looks like an old CRT at too high frequencies.

Anything i could test or is it the wrong card?

Thx Navy

teedge77

  • Addicted
  • *
  • Posts: 591
    • View Profile
Re: Lockup after first reboot
« Reply #1 on: September 13, 2007, 06:42:03 pm »
you did try booting again right? you said after your first one....was there a second? mines done that before...i also get a weird thing where the keyboard lights flash ....but nothing loads....i just restart and its fine.
AMD Athlon 64 X2 6000+
Asus M2V Via AM2 ATX
Lite-On LH-20A1S SATA DVD Burner
80GB  SATA-150
EVGA GeForce 7300 GT 512MB DDR2 PCI Express
Sound Blaster Audigy SE
Kingston 2 GB PC6400 DDR2 800MHz
Ultra X-Finity 800-Watt
ZCU000
Cisco 7970
TDM400P

scrubadub

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: Lockup after first reboot
« Reply #2 on: September 13, 2007, 06:55:14 pm »
try to get to a shell alt-f1 alt-f2 etc. and then check dmesg and your xorg log (get the latest one in /var/log/)

Navy2k

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Lockup after first reboot
« Reply #3 on: September 13, 2007, 10:56:03 pm »
i rebootet a lot after the first one ;) dont helped

xorg.log has one error stating tha glx could not load ant thats true because in the xorg.conf the driver is "vesa"

im not at my box now but i will check dmesg, thx

Navy2k

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Lockup after first reboot
« Reply #4 on: September 14, 2007, 01:26:58 am »
Ok, it was a compatibilityproblem. I had a strange error like "could not allocate Mem to PCI:0:0:1" directly after the kernel loads from the cd.
I removed my DVS-S Card ( Hauppauge Nova SE2 ) from the system ant it works just perfect. Maybe i ned a newer mainboard to support both at the same time

Navy2k

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Lockup after first reboot
« Reply #5 on: September 17, 2007, 08:48:52 pm »
Ok, solved the Problem.

The Error was " PCI: Failed to allocate mem resource XXXXXXXXXXXX for XXXXXXXXXXX "

Solution: agp aperture size in BIOS to 256MB and all is perfectly fine