Vonage Softphone (SIP) setup.

[miskaone]

First Let me say I have a some what functional LinuxMCE on a HP Z552 from the DVD install. Whooa!


Has anyone setup Vonage with LinuxMCE? Good notes appreciated. I have the SIP settings but do not know where to start to customize Asterisk for SIP to Vonage.

[pixelator]

*IF* you have a vonage phone account and have the softphone as an add-on, then have a look at this thread.

http://www.vonage-forum.com/ftopic6017.html

The info you want is probably toward the last half (pages 2-3)

HTH

[miskaone]

Bah. URL not very informative for what I need. Was looking for settings. Found what I need here.

Asterisk -> Vonage -> SIP Trunk

http://www.pbxinfo.com/asterisk-systems/21509-vonage-softphone-line-trunk-asterisk.html

Only thing is I have one-way audio Callers can not hear me from core. Suggestions?

[dopey]

Sorry, I have to ask; is the microphone muted? It often is by default.

[miskaone]

Muted, well not from kubuntu. I adjusted the volume. From Orbiter Embedded Phone I selected muted during the call, no joy.

I am not sure what the HUGE "F" does in the Telecom UI. I selected that as well no change, would like to know what that does though.

[teedge77]

the F is for the follow me function.

[bulek]

Hi,

if I remember right, there is *43 internal number on Asterisk for simple echo test.... Maybe you'll hear your self.... One way audio could be also caused by some inproper NAT or Firewall setup...

HTH,
regards,

Bulek.

[miskaone]

Thanks for that test. I can hear myself so I guess the client is working. I will look at my NAT config. Do I need to open RTP port on the pluto firewall?