Author Topic: Introducing: web orbiter  (Read 4455 times)

corwin

  • Regular Poster
  • **
  • Posts: 30
    • View Profile
Introducing: web orbiter
« on: June 26, 2007, 10:52:10 am »
Hi people,

From posts on this list, there seems to be a prevailing notion that to get your first MD set up (which requires a working orbiter) you need to install LinuxMCE as a hybrid. This is not entirely true, but not surprising as the better solution isn't exactly widely advertised... so for anyone who haven't heard about this yet:

What you want to use is the web orbiter, which in the interest of clarity was named "generic Proxy Orbiter" and which runs inside the equally-clearly-named "generic web device". In the admin interface of your core, click on "Show Devices Tree" ->  "CORE" -> "Create Child Device". Select "Generic Web Device" from the Device Template menu, then click "Pick device template". Reload the router, then go to http://dcerouter/pluto-admin/weborbiter.php. Log in, select "Generic Web Device" from the Device menu, click "Submit", and you got an orbiter.

Be worn - it's a *very bad* orbiter. It's bad even in Pluto standards. But it works, mostly, at least well enough to get your MD set up.

Itai

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: Introducing: web orbiter
« Reply #1 on: June 26, 2007, 11:04:42 am »
Hi people,

From posts on this list, there seems to be a prevailing notion that to get your first MD set up (which requires a working orbiter) you need to install LinuxMCE as a hybrid. This is not entirely true, but not surprising as the better solution isn't exactly widely advertised... so for anyone who haven't heard about this yet:

What you want to use is the web orbiter, which in the interest of clarity was named "generic Proxy Orbiter" and which runs inside the equally-clearly-named "generic web device". In the admin interface of your core, click on "Show Devices Tree" ->  "CORE" -> "Create Child Device". Select "Generic Web Device" from the Device Template menu, then click "Pick device template". Reload the router, then go to http://dcerouter/pluto-admin/weborbiter.php. Log in, select "Generic Web Device" from the Device menu, click "Submit", and you got an orbiter.

Be worn - it's a *very bad* orbiter. It's bad even in Pluto standards. But it works, mostly, at least well enough to get your MD set up.

Itai

A good point. The Web Orbiter is a possible way to get the 'New MD' announcement. However in our experience this can be somewhat hit and miss due to the way the Web Orbiter is implemented - sometimes it just misses the announcement message. If you miss the announcement then you can get into a situation where that machine's Mac address gets stuck in a kind of 'limbo' and does not get re-announced if you attempt a 2nd time to kick off an initial pxe boot.

Another solution... though is to add the Windows Orbiter to a Windows XP machine. Just boot your Windows machine on the LMCE network and use your browser to go the the Web Admin login page of your Core. You will see a link there to download the Windows Orbiter. Just install it and then launch the Orbiter and follow the on screen setup instructions. Once installed and added you then have the Orbiter running on your Windows machine and this allows you to see the announcement messages when you add a pxe booted MD.

Hope this helps

Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk