Author Topic: ati woes  (Read 2815 times)

amanda

  • Newbie
  • *
  • Posts: 4
    • View Profile
ati woes
« on: June 06, 2007, 12:43:29 am »
I have an old IBM thinkpad T41P (2733GGG) with an ATI MOBILITY FIRE GL T2 where the LCD screen is broken.

I have it connected through VGA to my Samsung LCD (32")

I thought I would use this for my first LinuxMCE.

In the bios, the LCD is disabled,
the fglrx driver is installed correctly, but whenever LinuxMCE is loaded it turn on the LCD as well, giving issues with the playback of video files.

Any help appreciated on getting my LCD to stay off.

Thanks
Amanda

Cj_MaN

  • Regular Poster
  • **
  • Posts: 39
    • View Profile
Re: ati woes
« Reply #1 on: June 06, 2007, 04:40:59 pm »
1.From another PC, that's in the same network with your LMCE PC, or from LCME PC go to Ubuntu desktop (CTRL+ALT+F7) open a Internet Browser.
2.Type http://dcerouter or http://<the_lmce_pc_ip_address> and press enter
3.Login with the user name and password that you've created in the : "VIdeo WIzard -> house Setup" or if you haven't created one yet just press "Create New User" and be sure to check "Master User (can modify configuration)?" After you've created the user login with it!
4.Go to "Wizard -> Devices -> Media Directors"
5.Select "VGA" from the "Connector" drop down menu for the "The core/hybrid" Device or for the Media Director that is your laptop.
6.After you've done this, be sure to do a quick reload router or even reboot the laptop!

If this doesn't resolve your problem please do the following:

1.Describe the issues with video playback
2.What you mean by "the LCD screen is broken". Can you see the kde screen? Or you can't see anything on the display?
3.Please post the /etc/X11/xorg.conf and /var/log/Xorg.o.log files.
« Last Edit: June 06, 2007, 05:58:39 pm by Cj_MaN »

amanda

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: ati woes
« Reply #2 on: June 07, 2007, 01:00:07 pm »
I dont see the Connector Drop Down menu anywhere, under Wizard -> Devices -> Media Directors.

The samsung is capable of up to 1380*768, and I can change the resolution fine between 800*600 and 1024*768.

The internal LCD-display is broken, so only the top 4 cm. is viewable on the LCD.

I suspect that when playing video media files, the movie output is only shown on the internal display, as the samsung only shows a black screen, where the movie should play.

And after twiddling with the options, I now get the Orbiter cannot register with the router - please try again later, when starting LinuxMCE.

So, it's back to reinstalling, or is there a command to reset to factory defaults ?

On the Thinkpad t41P there is a button for switching between the external display (ctr) and the internal display (lcd) or both. This button actually works, when i first press CTRL+ALT+F2 to get to the login prompt, but not when i return back into LinuxMCE..

Not giving up yet....