Author Topic: 14.04 July 24 29195 Notes  (Read 403 times)

pigdog

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1008
    • View Profile
14.04 July 24 29195 Notes
« on: July 28, 2014, 05:46:13 pm »
Hi,

On initial install no network configuration messages but did get some systemd-udevd messages until hal loaded.

A/V Wizard - no problems.

Setup Wizard ran with no Sarah A/V.

ifconfig was good, using Nvidia drivers, no Flickr photos.

Confirm Dependencies log showed the usual suspects.

Did update/upgrade with just

report chown: cannot access //var/www/mythweb/data 0 and dpkg:error processing package pluto-mthtv-plugin ( -- confure):

Edited lanman client change in smb.conf and restarted service

Powered up NAS.  NAS discovered.  Volumes detected.  UpdateMedia discovering content.

I built a MD profile, was discovered by the router but failed Diskless_Setup.sh.

Message after fail [    33.396623]  random: nonblocking pool is initialized


Cheers.

posde

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3059
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: 14.04 July 24 29195 Notes
« Reply #1 on: July 28, 2014, 08:36:47 pm »
The lanman setting should have been already in... could you verify, please.

pigdog

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1008
    • View Profile
Re: 14.04 July 24 29195 Notes
« Reply #2 on: July 29, 2014, 02:49:46 pm »
Hi,

lanman had to be edited into /etc/samba/smb.conf

Cheers

posde

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3059
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: 14.04 July 24 29195 Notes
« Reply #3 on: July 29, 2014, 05:50:57 pm »
Could you check if the smb template files under /usr/pluto/ contain the changes

posde

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3059
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: 14.04 July 24 29195 Notes
« Reply #4 on: July 30, 2014, 01:51:56 am »
Let me reply to myself. Looking through all scripts et al, I realized the smb.conf.tmpl is another of those NOT used goodies, Plutu came up with :(

I'll amend Network_Setup.sh to add the lanman settings.

posde

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3059
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: 14.04 July 24 29195 Notes
« Reply #5 on: July 30, 2014, 01:55:34 am »
I need to correct myself, and voice an apology to the Pluto guys. They DO check the smb.conf.template file.

Which brings us back to the initial question: Please check if you can find the client lanman auth setting in your smb.conf.template file.

Thanks.

pigdog

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1008
    • View Profile
Re: 14.04 July 24 29195 Notes
« Reply #6 on: July 30, 2014, 02:08:24 pm »
Hi

lanman is not in the 14.04 template file.

Cheers

pigdog

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1008
    • View Profile
Re: 14.04 July 24 29195 Notes
« Reply #7 on: July 30, 2014, 04:04:55 pm »
Hi,

Checked the 12.04 July 19 29194 load and lanman is in that template.

Cheers.