Author Topic: MythTV woes  (Read 5151 times)

cckrobinson

  • Veteran
  • ***
  • Posts: 124
    • View Profile
MythTV woes
« on: April 02, 2007, 12:15:40 am »
I tried to installing LMCE on a machine that already had a functioning MythTV installation.  Apparently that was a mistake.  I'm currently running into database problems.

My original Myth Install created a mythtv user and a database called MythConverg.  From the mythtv setup, you were required to supply a password for the mythtv user in order to access the database.  That was fine and it worked.

When LMCE tries to access the database it connects as user 'root'@'localhost' with NO password.  When I run the mythtv setup from inside the orbiter it can't connect to the database, so it brings you to the screen where you need to supply the IP of the backend and the database\name password.  You MUST supply a password here.  To get by this issue, I can manually change the database to use a password for 'root@localhost'.  That allows me to run the setup and configure my cards.  The problem is that if you try to change anything from the Pluto admin (i.e. the PVR-150 settings) it fails because it tries to connect as 'root'@'localhost' with NO password.

So here are my questions:
1. Why does LMCE always try to connect to the mysql as root?  This isn't how a typical myth install is done.
2. Is it possible to change LMCE so that it uses a password when connecting to mysql?


cckrobinson

  • Veteran
  • ***
  • Posts: 124
    • View Profile
Re: MythTV woes
« Reply #1 on: April 02, 2007, 06:26:23 am »
It appears that I was mistaken about how LMCE was trying to connect to the mythconverg database.  It wasn't using root@localhost after all.  It connects as that user for other database stuff.  For myth it seems to be using the username/password found in the /etc/mythtv/mysql.txt file.  In my case this file had a goofy random password.  I was able able to change it to a known value and then modify the password for that user in the mythconverg database to match. That seemed to resolve the connection issues.  I also deleted the ~mythv/.mythtv and the ~root/.mythtv folders.  These were hanging around from my previous myth install, and they aren't needed with Pluto.

Inside of LMCE I still can't watch TV.  When I select media->TV the mythfrontend launches correctly.  I'm able to see the main menu.  As soon as I hit 'Watch TV' the screen goes black for a few seconds and then turns grey.  Since I'm not seeing the "unable to connect to database" message anymore, so I'm pretty sure the frontend is able to talk to the backend.  I also know that the ivtv drivers are installed correctly for my PVR-150.  I can run 'mplayer /dev/video0' and see video just fine.

Here's the error that I'm getting in the MythTV-Plugin log when I try to watch live TV:

/01/07 22:17:09.977        Parameter 159(PK_Screen): 128 <0xa7389ba0>
08   04/01/07 22:17:09.979        Parameter 5(Value To Assign): MythTV Player(LinuxMCE LiveTV) <0xaab90ba0>
08   04/01/07 22:17:09.979        Parameter 9(Text):  <0xaab90ba0>
08   04/01/07 22:17:09.979        Parameter 29(PK_MediaType): 1 <0xaab90ba0>
08   04/01/07 22:17:09.979        Parameter 41(StreamID): 2 <0xaab90ba0>
08   04/01/07 22:17:09.979        Parameter 48(Value): 0 <0xaab90ba0>
08   04/01/07 22:17:09.979        Parameter 50(Name): mythfrontend.Mythfrontend <0xaab90ba0>
08   04/01/07 22:17:09.979        Parameter 103(List PK Device): 24,24,15,,1,1,0 <0xaab90ba0>
08   04/01/07 22:17:09.979        Parameter 120(Retransmit): 0 <0xaab90ba0>
08   04/01/07 22:17:10.005      Received Message from 19 (OnScreen Orbiter / Family Room) to 28 (Photo Screen Saver / Family Room), type 1 id 193 Command:Off, parameters: <0x79b2eba0>
08   04/01/07 22:17:10.005        Parameter 97(PK_Pipe): 0 <0x79b2eba0>
05   04/01/07 22:17:11.186      Socket::ReceiveData 0x85ec888 failed, bytes left 0 start: 1060000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 140 Incoming_Conn Socket 140 127.0.0.1EVENT 24 T=35 Event #24 <0x7b331ba0>
05   04/01/07 22:17:11.207      Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 140 127.0.0.1EVENT 24 T=35 Event #24 <0x7b331ba0>
05   04/01/07 22:17:11.207      TCPIP: Closing connection to 24 (Router Dev #0) 0x85ec888 m_Socket: -1 <0x7b331ba0>
05   04/01/07 22:17:11.207      Router::RemoveAndDeleteSocket 0x85ec888 24 <0x7b331ba0>
05   04/01/07 22:17:11.186      Socket::ReceiveData 0x85fddc8 failed, bytes left 0 start: 1060000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 141 Incoming_Conn Socket 141 127.0.0.1EVENT 24 T=35 Event #24 <0x7bb32ba0>
05   04/01/07 22:17:11.209      Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 141 127.0.0.1EVENT 24 T=35 Event #24 <0x7bb32ba0>
05   04/01/07 22:17:11.209      TCPIP: Closing connection to 24 (Router Dev #0) 0x85fddc8 m_Socket: -1 <0x7bb32ba0>
05   04/01/07 22:17:11.209      Router::RemoveAndDeleteSocket 0x85fddc8 24 <0x7bb32ba0>
05   04/01/07 22:17:25.384      Router::RemoveAndDeleteSocket 0x8619208 24 <0x7b331ba0>

Based on the socket errors, I can only assume that the pluto frontend is not getting any data from the backend so it eventually times out.  That's probably why the screen turns grey.

Does anyone have a clue what's going on here?

webpaul1

  • Veteran
  • ***
  • Posts: 140
    • View Profile
Re: MythTV woes
« Reply #2 on: April 03, 2007, 06:44:02 am »
What do you see in the log /var/log/pluto/24*...

Note CPIP: Closing connection to 24 (Router Dev #0) 0x85fddc8 m_Socket: -1 <0x7bb32ba0>

that means device 24 has stopped responding.

cckrobinson

  • Veteran
  • ***
  • Posts: 124
    • View Profile
Re: MythTV woes
« Reply #3 on: April 03, 2007, 07:03:20 am »
I saw this over and over again in the 24_MythtTV_Player.log

========== NEW LOG SECTION ==========
1   04/01/07 16:16:23   24 (spawning-device)   Starting... 3
1   04/01/07 16:16:23   24 (spawning-device)   Found ./MythTV_Player
05   04/01/07 16:22:23.627      I failed to kill the application launched with name: mythfrontend <0xb6a9bba0>
05   04/01/07 16:23:15.493      Going to send command jump livetv <0xb7a9dba0>
Return code: 139
3   04/01/07 16:23:16   24 (spawning-device)   Device died... count=3/50 dev=24
Sun Apr  1 16:23:16 CDT 2007 died

I couldn't get any further, so I bit the bullet and tried reinstalling.  It just finished.  I completely removed Pluto, Mythtv and all related databases.  The installed went fine except for this error in the mce-installer-xxx.log which worries me:

Setting up pluto-mythtv-player (1.0) ...
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
tail: Warning: "+number" syntax is deprecated, please use "-n +number"
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
WARNING: fake invoke-rc.d called
Waiting 3 seconds so that myth backed is able to actually create the schema
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
********
There is an error in the mythtv backend setup. It looks like the database schema wasn't created properly
********

I'm going to try running the myth-setup from the Orbiter and see what happens.