Author Topic: 1-Wire Temperature Sensors  (Read 4309 times)

Techstyle

  • Addicted
  • *
  • Posts: 674
    • View Profile
    • Techstyle UK Ltd.
1-Wire Temperature Sensors
« on: February 16, 2013, 06:46:20 pm »
So I have 4 Temperature sensors installed in my 1-Wire network.

2 days back 1 was accidentally unplugged.  Since then the temperature has remained constant at the temp that was being reported - even after a reload and reboot.  what is the correct process for getting this to work again?

_if_

  • Guru
  • ****
  • Posts: 248
    • View Profile
Re: 1-Wire Temperature Sensors
« Reply #1 on: February 16, 2013, 09:11:36 pm »
you could check if the right USB port was recognized in the devicetemplate.
other than that, 1wire has always been a misterious thing - suddenly one day they get recognized and nobody knows why  ???
was the serial number recognized already?

Techstyle

  • Addicted
  • *
  • Posts: 674
    • View Profile
    • Techstyle UK Ltd.
Re: 1-Wire Temperature Sensors
« Reply #2 on: February 16, 2013, 10:13:48 pm »
the one sensor that was disconnected was still appearing in the log on reboot - this is after the device was physically disconnected and shows that it is connected properly:
Code: [Select]
========== NEW LOG SECTION ==========
1 02/16/13 10:43:50 118 (spawning-device) Starting... 1
1 02/16/13 10:43:50 118 (spawning-device) Found /usr/pluto/bin/OneWire
01 02/16/13 10:43:51.543 TranslateSerialUSB pci0000:00/0000:00:12.0+1 result /dev/ttyUSB1 <0xb77506d0>
01 02/16/13 10:43:51.543 Opening port: /dev/ttyUSB1 <0xb77506d0>
05 02/16/13 10:43:52.164 Creating child 130 <0xb77506d0>
05 02/16/13 10:43:52.164 Note: Device manager has attached a device of type 1946 that this has no custom event handler for.  It will not fire events. <0xb77506d0>
05 02/16/13 10:43:52.165 Note: Device manager has attached a device of type 1946 that this has no custom handler for.  This is normal for IR. <0xb77506d0>
05 02/16/13 10:43:52.165 Creating child 131 <0xb77506d0>
05 02/16/13 10:43:52.165 Note: Device manager has attached a device of type 1946 that this has no custom event handler for.  It will not fire events. <0xb77506d0>
05 02/16/13 10:43:52.165 Note: Device manager has attached a device of type 1946 that this has no custom handler for.  This is normal for IR. <0xb77506d0>
05 02/16/13 10:43:52.165 Creating child 132 <0xb77506d0>
05 02/16/13 10:43:52.165 Note: Device manager has attached a device of type 1946 that this has no custom event handler for.  It will not fire events. <0xb77506d0>
05 02/16/13 10:43:52.165 Note: Device manager has attached a device of type 1946 that this has no custom handler for.  This is normal for IR. <0xb77506d0>
05 02/16/13 10:43:52.165 Creating child 133 <0xb77506d0>
05 02/16/13 10:43:52.165 Note: Device manager has attached a device of type 1946 that this has no custom event handler for.  It will not fire events. <0xb77506d0>
05 02/16/13 10:43:52.165 Note: Device manager has attached a device of type 1946 that this has no custom handler for.  This is normal for IR. <0xb77506d0>
05 02/16/13 11:39:31.712 Got a reload command from 0  <0xb61ffb70>
05 02/16/13 11:39:31.966 void ClientSocket::Disconnect() on this socket: 0x80b4350 (m_Socket: 7) <0xb77506d0>
Return code: 2
2 02/16/13 11:39:31 118 (spawning-device) Device requests restart... count=1/50 dev=118
Sat Feb 16 11:39:32 CST 2013 Restart

then after device 132 was deleted:

Code: [Select]
========== NEW LOG SECTION ==========
1 02/16/13 11:47:26 118 (spawning-device) Starting... 1
1 02/16/13 11:47:26 118 (spawning-device) Found /usr/pluto/bin/OneWire
01 02/16/13 11:47:26.321 TranslateSerialUSB pci0000:00/0000:00:12.0+1 result /dev/ttyUSB1 <0xb77a26d0>
01 02/16/13 11:47:26.321 Opening port: /dev/ttyUSB1 <0xb77a26d0>
05 02/16/13 11:47:26.708 Creating child 130 <0xb77a26d0>
05 02/16/13 11:47:26.709 Note: Device manager has attached a device of type 1946 that this has no custom event handler for.  It will not fire events. <0xb77a26d0>
05 02/16/13 11:47:26.709 Note: Device manager has attached a device of type 1946 that this has no custom handler for.  This is normal for IR. <0xb77a26d0>
05 02/16/13 11:47:26.709 Creating child 131 <0xb77a26d0>
05 02/16/13 11:47:26.709 Note: Device manager has attached a device of type 1946 that this has no custom event handler for.  It will not fire events. <0xb77a26d0>
05 02/16/13 11:47:26.709 Note: Device manager has attached a device of type 1946 that this has no custom handler for.  This is normal for IR. <0xb77a26d0>
05 02/16/13 11:47:26.709 Creating child 133 <0xb77a26d0>
05 02/16/13 11:47:26.709 Note: Device manager has attached a device of type 1946 that this has no custom event handler for.  It will not fire events. <0xb77a26d0>
05 02/16/13 11:47:26.709 Note: Device manager has attached a device of type 1946 that this has no custom handler for.  This is normal for IR. <0xb77a26d0>

it seems like it doesn't find the device.  When I installed them less than a week ago they were discovered almost immediately.

hari

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 2428
    • View Profile
    • ago control
Re: 1-Wire Temperature Sensors
« Reply #3 on: February 16, 2013, 11:58:32 pm »
the OneWire DCE device uses the OWFS client API. If you can see the devices in OWFS, they will appear in LinuxMCE.
rock your home - http://www.agocontrol.com home automation