Ok,
Trying to get this working in squeezebox. I see others have got this to work and others have had problems per this thread
http://forum.linuxmce.org/index.php/topic,12605.0.htmlHere's what I have;
lsusb
dcerouter_1031870:~# lsusb
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 008: ID 046d:c70c Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 002 Device 007: ID 046d:c70b Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 002 Device 006: ID 046d:0b02 Logitech, Inc. BT Mini-Receiver (HID proxy mode)
Bus 002 Device 005: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 004: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 003: ID 154b:0048 PNY
Bus 002 Device 002: ID 8087:0024
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0d8c:013c C-Media Electronics, Inc.
Bus 001 Device 002: ID 8087:0024
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
aplay -l
dcerouter_1031870:~# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
dcerouter_1031870:~# aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=PCH
HDA Intel PCH, ALC887-VD Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC887-VD Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC887-VD Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC887-VD Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC887-VD Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC887-VD Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC887-VD Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, ALC887-VD Digital
IEC958 (S/PDIF) Digital Audio Output
sysdefault:CARD=Device
USB PnP Sound Device, USB Audio
Default Audio Device
front:CARD=Device,DEV=0
USB PnP Sound Device, USB Audio
Front speakers
surround40:CARD=Device,DEV=0
USB PnP Sound Device, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Device,DEV=0
USB PnP Sound Device, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Device,DEV=0
USB PnP Sound Device, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Device,DEV=0
USB PnP Sound Device, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Device,DEV=0
USB PnP Sound Device, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Device,DEV=0
USB PnP Sound Device, USB Audio
IEC958 (S/PDIF) Digital Audio Output
dcerouter_1031870:~# aplay -D sysdefault:CARD=Device /home/public/data/audio/windhowl.wav
Produces good sound. This card has the same chip as the 7.1 card but only has stereo output.
squeezeslave -L
dcerouter_1031870:~# squeezeslave -L
Output devices:
0: (ALSA) HDA Intel PCH: ALC887-VD Analog (hw:0,0) (11/46)
1: (ALSA) HDA Intel PCH: ALC887-VD Digital (hw:0,1) (11/46)
3: (ALSA) USB PnP Sound Device: USB Audio (hw:1,0) (11/46)
4: (ALSA) sysdefault (42/46)
5: (ALSA) front (11/46)
6: (ALSA) surround40 (11/46)
7: (ALSA) surround41 (11/46)
8: (ALSA) surround50 (11/46)
9: (ALSA) surround51 (11/46)
10: (ALSA) surround71 (11/46)
11: (ALSA) iec958 (11/46)
12: (ALSA) spdif (11/46)
13: (ALSA) spdif_playback (11/46)
14: (ALSA) asym_spdif (11/46)
16: (ALSA) asym_analog (42/46)
17: (ALSA) dmix (42/42)
*18: (ALSA) default (11/46)
19: (OSS) /dev/dsp (11/46)
20: (OSS) /dev/dsp1 (11/46)
I followed the wiki closely and have no sound output. The wiki is kind of vague so this is what I did -
Select
Device->A/V EquipmentSelected
Add DeviceSelected
SqueezeBox Player template
Selected "Mechanical Room" as room #This is a room with no MD in it
Entered 00:00:00:00:00:01 as mac address
Saved
I believe all the software needed was installed at this point but I'm not sure.Reloaded Router
Select
Device->A/V EquipmentSelected
Add DeviceSelected
Squeezeslave template
Selected "Mechanical Room" as room #This is a room with no MD in it
Entered 00:00:00:00:00:01 as mac address
Selected
AdvancedEntered "4" under
Alsa Output DeviceSaved
Reloaded Router
Rebuilt Orbiters
Reloaded Router
Opened orbiter
Selected "Mechanical Room" as room
Selected wav file under audio
Selected Play
No sound
Opened terminal with ssh
Ran
dcerouter_1031870:~# /usr/bin/squeezeslave -o4 -m00:00:00:00:00:01 -r5 -M/var/log/squeezeslave.log
Opened orbiter
Selected "Mechanical Room" as room
Selected wav file under audio
Selected Play
No sound
squeezeslave -L is now smaller
dcerouter_1031870:~# squeezeslave -L
Output devices:
1: (ALSA) HDA Intel PCH: ALC887-VD Digital (hw:0,1) (11/46)
3: (ALSA) USB PnP Sound Device: USB Audio (hw:1,0) (11/46)
4: (ALSA) sysdefault (42/46)
5: (ALSA) iec958 (11/46)
6: (ALSA) spdif (11/46)
7: (ALSA) spdif_playback (11/46)
8: (ALSA) asym_spdif (11/46)
10: (ALSA) asym_analog (42/46)
11: (ALSA) dmix (42/42)
*12: (ALSA) default (11/46)
14: (OSS) /dev/dsp1 (11/46)
I have also tried this with 3 with same result.
Also upon reboot
dcerouter_1031870:~# cat /var/log/squeezeslave.log
Retry in 5 seconds.
Retry in 5 seconds.
Retry in 5 seconds.
Retry in 5 seconds.
Retry in 5 seconds.
Retry in 5 seconds.
Error connecting to 127.0.0.1:3483
Retry in 5 seconds.
Error connecting to 127.0.0.1:3483
And
dcerouter_1031870:~# ps aux | grep squeezeslave
root 14331 0.0 0.0 3320 832 pts/7 S+ 19:15 0:00 grep --color=auto squeezeslave
Before running
dcerouter_1031870:~# /usr/bin/squeezeslave -o4 -m00:00:00:00:00:01 -r5 -M/var/log/squeezeslave.log
After
dcerouter_1031870:~# ps aux | grep squeezeslave
root 14828 0.4 0.0 43328 1984 ? SLsl 19:15 0:00 /usr/bin/squeezeslave -o4 -m00:00:00:00:00:01 -r5 -M/var/log/squeezeslave.log
root 15118 0.0 0.0 3320 832 pts/7 S+ 19:16 0:00 grep --color=auto squeezeslave
Any thoughts where to go?
Thanks