LinuxMCE 10.04 Gtalk Setup

[brent2009]

Hi, So I was able to get gtalk working in the past in Linuxmce 810 using FreePBX but now that freepbx isn't used anymore I'm confused on how to set this back up.

I see there is an option for phone lines now and tried using the gtalk option there but it always says disconnected?

Thanks for any assistance with this.

[l3mce]

Riggs... or anyone really I guess... need your help testing if you don't mind. Trying to fix this today and tomorrow.

[huh]

[On IRCote author=l3mce link=topic=12953.msg94363#msg94363 date=1356369620]
Riggs... or anyone really I guess... need your help testing if you don't mind. Trying to fix this today and tomorrow.
[/quote]

I can test. Will try to get on IRC soon

[cfernandes]

hi ,

after a complete reinstall (internet install)  , i try to use gtalk .


i configured  and work  with somes ajusts.  db_phone_config.sh

you need to configure username with  your complete  account  with  "@gmail.com"

please try and let me know if you have any problem.

[Riggs]

I've been playing with this for weeks and I have got no where.
As for filling out the username with @gmail.com does not change a damn thing, as for it saving the settings it is hit and miss

[cfernandes]

my config

[Riggs]

it looks like you are putting your username in the phone number section

[cfernandes]

yeap

[Riggs]

So we don't enter a phone number..
There needs to be a HowTo for this or the script needs to change to allow for the correct values.

[cfernandes]

this is how to work for me.
i don't have gtalk number.

try configuring username on the phone number. i will check this script after christmas .

cfernandes

[Riggs]

Ok after putting the username in the phone number filed, it show connected but i can not make outgoing calls, they just ring endlessly.

asterisk log full:
[Dec 24 16:25:23] NOTICE[23736] iax2-provision.c: No IAX provisioning configuration found, IAX provisioning disabled.
[Dec 24 16:26:18] VERBOSE[25259] chan_gtalk.c: OOOOH domain = riggsusa
[Dec 24 16:27:00] VERBOSE[26875] chan_gtalk.c: OOOOH domain = riggsusa
[Dec 24 16:27:50] WARNING[2379] chan_sip.c: No valid transports available, falling back to 'udp'.
[Dec 24 16:27:50] NOTICE[28066] chan_iax2.c: Ignoring bindport on reload
[Dec 24 16:27:50] NOTICE[28066] chan_iax2.c: Ignoring bindaddr on reload
[Dec 24 16:27:50] NOTICE[28066] iax2-provision.c: No IAX provisioning configuration found, IAX provisioning disabled.
[Dec 24 16:28:19] WARNING[29142] pbx.c: Extension 'vmx', priority 54 in 'macro-vm', label 'vmxopts' already in use at priority 52
[Dec 24 16:28:19] WARNING[2379] chan_sip.c: No valid transports available, falling back to 'udp'.
[Dec 24 16:29:23] WARNING[30382] pbx.c: Extension 'vmx', priority 54 in 'macro-vm', label 'vmxopts' already in use at priority 52
[Dec 24 16:29:23] WARNING[2379] chan_sip.c: No valid transports available, falling back to 'udp'.
[Dec 24 16:29:25] VERBOSE[30388] chan_gtalk.c: OOOOH domain = riggsusa

[cfernandes]

i have  make some test  and now i can  dial out

you need to setup  the name off line as gtalk

please try 

[Riggs]

I put your patch in (db_phone_config.sh) now it does not show a status and i can not add a sip soft phone to test.
when i add a sip soft phone in the LMCE admin page, there is no profiled ext or password

[cfernandes]

my db_phone_config.sh  is a replacement not a patch .

[Riggs]

i just called it a patch , but what i did was remove the old and put in the new