Author Topic: P4 2.5GB + HDTV3000 + Kodicom 8ch + HDHomerun + CM15A  (Read 914 times)

inb

  • Making baby steps
  • Posts: 2
    • View Profile
P4 2.5GB + HDTV3000 + Kodicom 8ch + HDHomerun + CM15A
« on: September 21, 2012, 05:27:34 pm »
I have a Pentium IV computer that had some busted capacitors on the motherboard, became unstable and as a consequence I had stopped using it. Recently, I purchased a capacitor to replace, did it, and decided to try to install Beta1. Turns out that I'm still getting some weird hardware problems, so I decided to replace more capacitors etc. Still, I thought my install experience might be useful to others. In particular, I had to restart the install a few times and in the end it seems that mySQL had not been properly initialized.

Because I'm having hardware problems, I haven't fully repurposed the computer for server purposes, so it is multiboot. The first attempt to install it as "headless core" failed, as the linux install was not usable, in that apt-get would not download even after adding more sources. Installing it as "mixedhybrid" screwed up Grub and could not longer boot. Rather than fix Grub I decided to install Kubuntu 10.04.4 and just download the script. Here are my logs:

LinuxMCEsetup
Quote
Thu Sep 20 12:04:02 EDT 2012 - Logging initiatilized to /var/log/LinuxMCE_Setup.log
Thu Sep 20 12:04:02 EDT 2012 - Performing an update and an upgrade to all components
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
10 not fully installed or removed.
Need to get 0B/469MB of archives.
After this operation, 0B of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
  video-wizard-videos
Authentication warning overridden.
(Reading database ...
dpkg: warning: files list file for package `video-wizard-videos' missing, assuming package has no files currently installed.

(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 93659 files and directories currently installed.)
Preparing to replace video-wizard-videos 1.1 (using .../video-wizard-videos_1.1_all.deb) ...
Unpacking replacement video-wizard-videos ...
Setting up pluto-database-settings (2.0.0.45.12081326353) ...
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
dpkg: error processing pluto-database-settings (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of pluto-sqlcvs:
 pluto-sqlcvs depends on pluto-database-settings (>= 2.0.0.45); however:
  Package pluto-database-settings is not configured yet.
 pluto-sqlcvs depends on pluto-database-settings (<< 2.0.0.46); however:
  Package pluto-database-settings is not configured yet.
dpkg: error processing pluto-sqlcvs (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pluto-local-database:
 pluto-local-database depends on pluto-sqlcvs (>= 2.0.0.45); however:
  Package pluto-sqlcvs is not configured yet.
 pluto-local-database depends on pluto-sqlcvs (<< 2.0.0.46); however:
  Package pluto-sqlcvs is not configured yet.
 pluto-local-database depends on pluto-database-settings (>= 2.0.0.45); however:
  Package pluto-database-settings is not configured yet.
 pluto-local-database depends on pluto-database-settings (<< 2.0.0.46); however:
  Package pluto-database-settings is not configured yet.
dpkg: eNo apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because the error message indicates its a followup error from a previous failure.
No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
rror processing pluto-local-database (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pluto-system-database:
 pluto-system-database depends on pluto-sqlcvs (>= 2.0.0.45); however:
  Package pluto-sqlcvs is not configured yet.
 pluto-system-database depends on pluto-sqlcvs (<< 2.0.0.46); however:
  Package pluto-sqlcvs is not configured yet.
 pluto-system-database depends on pluto-database-settings (>= 2.0.0.45); however:
  Package pluto-database-settings is not configured yet.
 pluto-system-database depends on pluto-database-settings (<< 2.0.0.46); however:
  Package pluto-database-settings is not configured yet.
dpkg: error processing pluto-system-database (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pluto-media-database:
 pluto-media-database depends on pluto-sqlcvs (>= 2.0.0.45); however:
  Package pluto-sqlcvs is not configured yet.
 pluto-media-database depends on pluto-sqlcvs (<< 2.0.0.46); however:
  Package pluto-sqlcvs is not configured yet.
 pluto-media-database depends on pluto-database-settings (>= 2.0.0.45); however:
  Package pluto-database-settings is not configured yet.
 pluto-media-database depends on pluto-database-settings (<< 2.0.0.46); however:
  Package pluto-database-settings is not configured yet.
dpkg: error processing pluto-media-database (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pluto-security-database:
 pluto-security-database depends on pluto-sqlcvs (>= 2.0.0.45); however:
  Package pluto-sqlcvs is not configured yet.
 pluto-security-database depends on pluto-sqlcvs (<< 2.0.0.46); however:
  Package pluto-sqlcvs is not configured yet.
 pluto-security-database depends on pluto-database-settings (>= 2.0.0.45); however:
  Package pluto-database-settings is not configured yet.
 pluto-security-database depends on pluto-database-settings (<< 2.0.0.46); however:
  Package pluto-database-settings is not configured yet.
dpkg: error processing pluto-security-database (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pluto-telecom-database:
 pluto-telecom-database depends on pluto-sqlcvs (>= 2.0.0.45); however:
  Package pluto-sqlcvs is not configured yet.
 pluto-telecom-database depends on pluto-sqlcvs (<< 2.0.0.46); however:
  Package pluto-sqlcvs is not configured yet.
 pluto-telecom-database depends on pluto-database-settings (>= 2.0.0.45); however:
  Package pluto-database-settings is not configured yet.
 pluto-telecom-database depends on pluto-database-settings (<< 2.0.0.46); however:
  Package pluto-database-settings is not configured yet.
dpkg: error processing pluto-telecom-database (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pluto-std-plugins:
 pluto-std-plugins depends on pluto-system-database (>= 2.0.0.45); however:
  Package pluto-system-database is not configured yet.
 pluto-std-plugins depends on pluto-system-database (<< 2.0.0.46); however:
  Package pluto-system-database is not configured yet.
 pluto-std-plugins depends on pluto-media-database (>= 2.0.0.45); however:
  Package pluto-media-database is not configured yet.
 pluto-std-plugins depends on pluto-media-database (<< 2.0.0.46); however:
  Package pluto-media-database is not configured yet.
 pluto-std-plugins depends on pluto-security-database (>= 2.0.0.45); however:
  Package pluto-security-database is not configured yet.
 pluto-std-plugins depends on pluto-security-database (<< 2.0.0.46); however:
  Package pluto-security-database is not configured yet.
 pluto-std-plugins depends on pluto-telecom-database (>= 2.0.0.45); however:
  Package pluto-telecom-database is not configured yet.
 pluto-std-plugins depends on pluto-telecom-database (<< 2.0.0.46); however:
  Package pluto-telecom-database is not configured yet.
dpkg: error processing pluto-std-plugins (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pluto-dcerouter:
 pluto-dcerouter depends on pluto-local-database (>= 2.0.0.45); however:
  Package pluto-local-database is not configured yet.
 pluto-dcerouter depends on pluto-local-database (<< 2.0.0.46); however:
  Package pluto-local-database is not configured yet.
 pluto-dcerouter depends on pluto-std-plugins (>= 2.0.0.45); however:
  Package pluto-std-plugins is not configured yet.
 pluto-dcerouter depends on pluto-std-plugins (<< 2.0.0.46); however:
  Package pluto-std-plugins is not configured yet.
 pluto-dcerouter depends on pluto-system-database (>= 2.0.0.45); however:
  Package pluto-system-database is not configured yet.
 pluto-dcerouter depends on pluto-system-database (<< 2.0.0.46); however:
  Package pluto-system-database is not configured yet.
dpkg: error processing pluto-dcerouter (--configure):
 dependency problems - leaving unconfigured
Setting up video-wizard-videos (1.1) ...
Errors were encountered while processing:
 pluto-database-settings
 pluto-sqlcvs
 pluto-local-database
 pluto-system-database
 pluto-media-database
 pluto-security-database
 pluto-telecom-database
 pluto-std-plugins
 pluto-dcerouter
E: Sub-process /usr/bin/dpkg returned an error code (1)
An error (Exit code 100) occured during the last action
dist-upgrade

dmesg
Quote
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-43-generic (buildd@roseapple) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #97-Ubuntu SMP Wed Sep 5 16:43:09 UTC 2012 (Ubuntu 2.6.32-43.97-generic 2.6.32.59+drm33.24)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000009ff30000 (usable)
[    0.000000]  BIOS-e820: 000000009ff30000 - 000000009ff40000 (ACPI data)
[    0.000000]  BIOS-e820: 000000009ff40000 - 000000009fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000009fff0000 - 00000000a0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0x9ff30 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000009ff30000 (usable)
[    0.000000]  modified: 000000009ff30000 - 000000009ff40000 (ACPI data)
[    0.000000]  modified: 000000009ff40000 - 000000009fff0000 (ACPI NVS)
[    0.000000]  modified: 000000009fff0000 - 00000000a0000000 (reserved)
[    0.000000]  modified: 00000000fecf0000 - 00000000fecf1000 (reserved)
[    0.000000]  modified: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 3784f000 - 37fef5ed
[    0.000000] Allocated new RAMDISK: 008ea000 - 0108a5ed
[    0.000000] Move RAMDISK from 000000003784f000 - 0000000037fef5ec to 008ea000 - 0108a5ec
[    0.000000] ACPI: RSDP 000f6230 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 9ff30000 00034 (v01 GATEWA ??? f`hÌ 20040422 MSFT 00000097)
[    0.000000] ACPI: FACP 9ff30200 00081 (v02 GATEWA ??? f`hÌ 20040422 MSFT 00000097)
[    0.000000] ACPI: DSDT 9ff30370 04171 (v01 GATEWA ??? f`hÌ 00000001 MSFT 0100000D)
[    0.000000] ACPI: FACS 9ff40000 00040
[    0.000000] ACPI: APIC 9ff30300 00068 (v01 GATEWA ??? f`hÌ 20040422 MSFT 00000097)
[    0.000000] ACPI: ASF! 9ff344f0 00099 (v16 LEGEND I865PASF 00000001 MSFT 0100000D)
[    0.000000] ACPI: WDDT 9ff34589 00040 (v01 INTEL  OEMWDDT  00000001 MSFT 0100000D)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1671MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008e5ed8]    TEXT DATA BSS ==> [0000100000 - 00008e5ed8]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [00008e6000 - 00008e9230]              BRK ==> [00008e6000 - 00008e9230]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [00008ea000 - 000108a5ed]      NEW RAMDISK ==> [00008ea000 - 000108a5ed]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0009ff30
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0009ff30
[    0.000000] On node 0 totalpages: 655051
[    0.000000] free_area_init_node: node 0, pgdat c07a0a20, node_mem_map c108c000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 3343 pages used for memmap
[    0.000000]   HighMem zone: 424483 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:5ecf0000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36056 r0 d21288 u2097152
[    0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc:
  • 0 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 649932
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-43-generic root=UUID=aa73d6f2-78eb-4dca-b478-200d62d3d9d4 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 13103040 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0009ff30)
[    0.000000] Memory: 2569024k/2620608k available (4699k kernel code, 50172k reserved, 2128k data, 664k init, 1711304k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07ab000 - 0xc0851000   ( 664 kB)
[    0.000000]       .data : 0xc0596db7 - 0xc07aafc8   (2128 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0596db7   (4699 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3192.896 MHz processor.
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.79 BogoMIPS (lpj=12771584)
[    0.004030] Security Framework initialized
[    0.004055] AppArmor: AppArmor initialized
[    0.004065] Mount-cache hash table entries: 512
[    0.004220] Initializing cgroup subsys ns
[    0.004226] Initializing cgroup subsys cpuacct
[    0.004232] Initializing cgroup subsys memory
[    0.004241] Initializing cgroup subsys devices
[    0.004245] Initializing cgroup subsys freezer
[    0.004248] Initializing cgroup subsys net_cls
[    0.004275] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.004280] CPU: L2 cache: 512K
[    0.004282] CPU: Physical Processor ID: 0
[    0.004285] CPU: Processor Core ID: 0
[    0.004289] mce: CPU supports 4 MCE banks
[    0.004300] CPU0: Thermal monitoring enabled (TM1)
[    0.004312] Performance Events: no PMU driver, software events only.
[    0.004320] Checking 'hlt' instruction... OK.
[    0.022991] ACPI: Core revision 20090903
[    0.030400] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.030406] ftrace: allocating 21841 entries in 43 pages
[    0.032087] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.074380] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
[    0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 0
[    0.008000] CPU1: Thermal monitoring enabled (TM1)
[    0.160134] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
[    0.160144] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.164029] Brought up 2 CPUs
[    0.164034] Total of 2 processors activated (12770.68 BogoMIPS).
[    0.164359] CPU0 attaching sched-domain:
[    0.164364]  domain 0: span 0-1 level SIBLING
[    0.164368]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.164376]   domain 1: span 0-1 level MC
[    0.164379]    groups: 0-1 (cpu_power = 1178)
[    0.164387] CPU1 attaching sched-domain:
[    0.164390]  domain 0: span 0-1 level SIBLING
[    0.164393]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.164401]   domain 1: span 0-1 level MC
[    0.164404]    groups: 0-1 (cpu_power = 1178)
[    0.164509] devtmpfs: initialized
[    0.164509] regulator: core version 0.5
[    0.164509] Time: 14:21:42  Date: 09/20/12
[    0.164509] NET: Registered protocol family 16
[    0.164509] Trying to unpack rootfs image as initramfs...
[    0.164509] EISA bus registered
[    0.164509] ACPI: bus type pci registered
[    0.165624] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[    0.165630] PCI: Using configuration type 1 for base access
[    0.168928] bio: create slab <bio-0> at 0
[    0.170311] ACPI: EC: Look up EC in DSDT
[    0.173434] ACPI: Executed 3 blocks of module-level executable AML code
[    0.179147] ACPI: Interpreter enabled
[    0.179157] ACPI: (supports S0 S1 S3 S4 S5)
[    0.179202] ACPI: Using IOAPIC for interrupt routing
[    0.188572] ACPI: Power Resource [URP1] (off)
[    0.188626] ACPI: Power Resource [FDDP] (off)
[    0.188677] ACPI: Power Resource [LPTP] (off)
[    0.188958] ACPI: No dock devices found.
[    0.189125] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.189193] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.189207] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff]
[    0.189342] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[    0.189455] pci 0000:00:1d.0: reg 20 io port: [0xc800-0xc81f]
[    0.189526] pci 0000:00:1d.1: reg 20 io port: [0xcc00-0xcc1f]
[    0.189595] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f]
[    0.189665] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f]
[    0.189744] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff400-0xfebff7ff]
[    0.189831] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.189839] pci 0000:00:1d.7: PME# disabled
[    0.189950] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.189994] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.190004] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.190017] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.190030] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.190041] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[    0.190052] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.190098] pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
[    0.190108] pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803]
[    0.190119] pci 0000:00:1f.2: reg 18 io port: [0xe400-0xe407]
[    0.190128] pci 0000:00:1f.2: reg 1c io port: [0xe000-0xe003]
[    0.190140] pci 0000:00:1f.2: reg 20 io port: [0xdc00-0xdc0f]
[    0.190210] pci 0000:00:1f.3: reg 20 io port: [0xd800-0xd81f]
[    0.190281] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfebffc00-0xfebffdff]
[    0.190292] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfebff800-0xfebff8ff]
[    0.190337] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.190344] pci 0000:00:1f.5: PME# disabled
[    0.190398] pci 0000:03:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[    0.190409] pci 0000:03:00.0: reg 14 32bit mmio pref: [0xe8000000-0xefffffff]
[    0.190434] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfeae0000-0xfeafffff]
[    0.190514] pci 0000:00:01.0: bridge 32bit mmio: [0xfca00000-0xfeafffff]
[    0.190521] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0800000-0xf07fffff]
[    0.190582] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc9f8000-0xfc9fbfff]
[    0.190594] pci 0000:01:00.0: reg 14 io port: [0xb800-0xb8ff]
[    0.190624] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfc9c0000-0xfc9dffff]
[    0.190665] pci 0000:01:00.0: supports D1 D2
[    0.190669] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.190676] pci 0000:01:00.0: PME# disabled
[    0.190795] pci 0000:01:01.0: supports D1 D2
[    0.190800] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot
[    0.190806] pci 0000:01:01.0: PME# disabled
[    0.190857] pci 0000:01:02.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[    0.190965] pci 0000:01:02.2: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[    0.191077] pci 0000:01:08.0: reg 10 32bit mmio: [0xfc9ff000-0xfc9fffff]
[    0.191089] pci 0000:01:08.0: reg 14 io port: [0xbc00-0xbc3f]
[    0.191142] pci 0000:01:08.0: supports D1 D2
[    0.191146] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.191153] pci 0000:01:08.0: PME# disabled
[    0.191194] pci 0000:00:1e.0: transparent bridge
[    0.191201] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[    0.191208] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8900000-0xfc9fffff]
[    0.191216] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe0700000-0xe07fffff]
[    0.191296] pci 0000:02:08.0: reg 10 32bit mmio pref: [0xe07f0000-0xe07f0fff]
[    0.191460] pci 0000:02:08.1: reg 10 32bit mmio pref: [0xe07f1000-0xe07f1fff]
[    0.191632] pci 0000:02:09.0: reg 10 32bit mmio pref: [0xe07f2000-0xe07f2fff]
[    0.191789] pci 0000:02:09.1: reg 10 32bit mmio pref: [0xe07f3000-0xe07f3fff]
[    0.191965] pci 0000:02:0a.0: reg 10 32bit mmio pref: [0xe07f4000-0xe07f4fff]
[    0.192144] pci 0000:02:0a.1: reg 10 32bit mmio pref: [0xe07f5000-0xe07f5fff]
[    0.192316] pci 0000:02:0b.0: reg 10 32bit mmio pref: [0xe07f6000-0xe07f6fff]
[    0.192480] pci 0000:02:0b.1: reg 10 32bit mmio pref: [0xe07f7000-0xe07f7fff]
[    0.192650] pci 0000:02:0c.0: reg 10 32bit mmio pref: [0xe07f8000-0xe07f8fff]
[    0.192806] pci 0000:02:0c.1: reg 10 32bit mmio pref: [0xe07f9000-0xe07f9fff]
[    0.192986] pci 0000:02:0d.0: reg 10 32bit mmio pref: [0xe07fa000-0xe07fafff]
[    0.193150] pci 0000:02:0d.1: reg 10 32bit mmio pref: [0xe07fb000-0xe07fbfff]
[    0.193330] pci 0000:02:0e.0: reg 10 32bit mmio pref: [0xe07fc000-0xe07fcfff]
[    0.193489] pci 0000:02:0e.1: reg 10 32bit mmio pref: [0xe07fd000-0xe07fdfff]
[    0.193661] pci 0000:02:0f.0: reg 10 32bit mmio pref: [0xe07fe000-0xe07fefff]
[    0.193830] pci 0000:02:0f.1: reg 10 32bit mmio pref: [0xe07ff000-0xe07fffff]
[    0.193993] pci 0000:01:01.0: bridge 64bit mmio pref: [0xe0700000-0xe07fffff]
[    0.194019] pci_bus 0000:00: on NUMA node 0
[    0.194031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.194176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.194259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.200316] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.200524] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.200714] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.200921] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.201112] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.201323] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.201513] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.201718] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.201953] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.201988] vgaarb: loaded
[    0.202201] SCSI subsystem initialized
[    0.202336] libata version 3.00 loaded.
[    0.202465] usbcore: registered new interface driver usbfs
[    0.202492] usbcore: registered new interface driver hub
[    0.202536] usbcore: registered new device driver usb
[    0.202821] ACPI: WMI: Mapper loaded
[    0.202825] PCI: Using ACPI for IRQ routing
[    0.203211] NetLabel: Initializing
[    0.203215] NetLabel:  domain hash size = 128
[    0.203218] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.203241] NetLabel:  unlabeled traffic allowed by default
[    0.203388] hpet clockevent registered
[    0.203394] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.203402] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.203412] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.212109] Switching to clocksource tsc
[    0.215613] AppArmor: AppArmor Filesystem Enabled
[    0.215636] pnp: PnP ACPI init
[    0.215663] ACPI: bus type pnp registered
[    0.221003] pnp: PnP ACPI: found 14 devices
[    0.221009] ACPI: ACPI bus type pnp unregistered
[    0.221016] PnPBIOS: Disabled by ACPI PNP
[    0.221044] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[    0.221057] system 00:0c: ioport range 0x400-0x47f has been reserved
[    0.221063] system 00:0c: ioport range 0x680-0x6ff has been reserved
[    0.221068] system 00:0c: ioport range 0x500-0x53f has been reserved
[    0.221075] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.221080] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.221086] system 00:0c: iomem range 0xfed20000-0xfed9ffff has been reserved
[    0.221099] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.221105] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[    0.221111] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[    0.221116] system 00:0d: iomem range 0x100000-0x9fffffff could not be reserved
[    0.256028] pci 0000:00:01.0: PCI bridge, secondary bus 0000:03
[    0.256033] pci 0000:00:01.0:   IO window: disabled
[    0.256041] pci 0000:00:01.0:   MEM window: 0xfca00000-0xfeafffff
[    0.256048] pci 0000:00:01.0:   PREFETCH window: 0xe0800000-0xf07fffff
[    0.256059] pci 0000:01:01.0: PCI bridge, secondary bus 0000:02
[    0.256064] pci 0000:01:01.0:   IO window: disabled
[    0.256071] pci 0000:01:01.0:   MEM window: disabled
[    0.256079] pci 0000:01:01.0:   PREFETCH window: 0x000000e0700000-0x000000e07fffff
[    0.256089] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[    0.256095] pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
[    0.256103] pci 0000:00:1e.0:   MEM window: 0xf8900000-0xfc9fffff
[    0.256110] pci 0000:00:1e.0:   PREFETCH window: 0xe0700000-0xe07fffff
[    0.256139] pci 0000:00:1e.0: setting latency timer to 64
[    0.256155] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.256160] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.256166] pci_bus 0000:03: resource 1 mem: [0xfca00000-0xfeafffff]
[    0.256171] pci_bus 0000:03: resource 2 pref mem [0xe0800000-0xf07fffff]
[    0.256177] pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
[    0.256182] pci_bus 0000:01: resource 1 mem: [0xf8900000-0xfc9fffff]
[    0.256188] pci_bus 0000:01: resource 2 pref mem [0xe0700000-0xe07fffff]
[    0.256193] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.256199] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[    0.256204] pci_bus 0000:02: resource 2 pref mem [0xe0700000-0xe07fffff]
[    0.256268] NET: Registered protocol family 2
[    0.256437] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.257014] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.257761] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.258183] TCP: Hash tables configured (established 131072 bind 65536)
[    0.258190] TCP reno registered
[    0.258371] NET: Registered protocol family 1
[    0.258428]   alloc irq_desc for 16 on node -1
[    0.258432]   alloc kstat_irqs on node -1
[    0.258443] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.258463] pci 0000:00:1d.0: PCI INT A disabled
[    0.258473]   alloc irq_desc for 19 on node -1
[    0.258477]   alloc kstat_irqs on node -1
[    0.258483] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.258501] pci 0000:00:1d.1: PCI INT B disabled
[    0.258512]   alloc irq_desc for 18 on node -1
[    0.258515]   alloc kstat_irqs on node -1
[    0.258522] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.258540] pci 0000:00:1d.2: PCI INT C disabled
[    0.258551] pci 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.258569] pci 0000:00:1d.3: PCI INT A disabled
[    0.258584]   alloc irq_desc for 23 on node -1
[    0.258588]   alloc kstat_irqs on node -1
[    0.258595] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.258630] pci 0000:00:1d.7: PCI INT D disabled
[    0.258660] pci 0000:03:00.0: Boot video device
[    0.258683] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
[    0.258915] cpufreq-nforce2: No nForce2 chipset.
[    0.258961] Scanning for low memory corruption every 60 seconds
[    0.259154] audit: initializing netlink socket (disabled)
[    0.259174] type=2000 audit(1348150902.255:1): initialized
[    0.268924] highmem bounce pool size: 64 pages
[    0.268933] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.271992] VFS: Disk quotas dquot_6.5.2
[    0.272131] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.273298] fuse init (API version 7.13)
[    0.273480] msgmni has been set to 1677
[    0.273916] alg: No test for stdrng (krng)
[    0.274034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.274039] io scheduler noop registered
[    0.274043] io scheduler anticipatory registered
[    0.274046] io scheduler deadline registered
[    0.274119] io scheduler cfq registered (default)
[    0.274441] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.274488] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.274678] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.274691] ACPI: Sleep Button [SLPB]
[    0.274780] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.274786] ACPI: Power Button [PWRF]
[    0.275188] processor LNXCPU:00: registered as cooling_device0
[    0.275297] processor LNXCPU:01: registered as cooling_device1
[    0.280911] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.281030] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.281573] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.283750] brd: module loaded
[    0.283788] isapnp: Scanning for PnP cards...
[    0.284560] loop: module loaded
[    0.284714] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.284871] ata_piix 0000:00:1f.1: version 2.13
[    0.284887] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.284896] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.284954] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.285070] scsi0 : ata_piix
[    0.285192] scsi1 : ata_piix
[    0.286615] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.286620] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.286655] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.286662] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.286718] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.286797] scsi2 : ata_piix
[    0.286887] scsi3 : ata_piix
[    0.288218] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[    0.288223] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[    0.288869] Fixed MDIO Bus: probed
[    0.288934] PPP generic driver version 2.4.2
[    0.289016] tun: Universal TUN/TAP device driver, 1.6
[    0.289019] tun: (C) 1999-2004 Max Krasnyansky < newbielink:mailto:maxk@qualcomm.com [nonactive]>
[    0.289172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.289199] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.289224] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.289229] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.289291] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.289404] ehci_hcd 0000:00:1d.7: debug port 1
[    0.293300] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[    0.293327] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff400
[    0.307605] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.307781] usb usb1: configuration #1 chosen from 1 choice
[    0.307829] hub 1-0:1.0: USB hub found
[    0.307842] hub 1-0:1.0: 8 ports detected
[    0.307967] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.308000] uhci_hcd: USB Universal Host Controller Interface driver
[    0.308053] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.308065] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.308070] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.308129] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.308167] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c800
[    0.308307] usb usb2: configuration #1 chosen from 1 choice
[    0.308352] hub 2-0:1.0: USB hub found
[    0.308364] hub 2-0:1.0: 2 ports detected
[    0.308432] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.308441] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.308446] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.308497] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.308528] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
[    0.308660] usb usb3: configuration #1 chosen from 1 choice
[    0.308701] hub 3-0:1.0: USB hub found
[    0.308712] hub 3-0:1.0: 2 ports detected
[    0.308779] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.308788] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.308793] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.308847] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.308871] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[    0.309007] usb usb4: configuration #1 chosen from 1 choice
[    0.309049] hub 4-0:1.0: USB hub found
[    0.309062] hub 4-0:1.0: 2 ports detected
[    0.309133] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.309143] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.309147] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.309200] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.309223] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
[    0.309362] usb usb5: configuration #1 chosen from 1 choice
[    0.309404] hub 5-0:1.0: USB hub found
[    0.309414] hub 5-0:1.0: 2 ports detected
[    0.309571] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.316850] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.316865] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.317097] mice: PS/2 mouse device common for all mice
[    0.317279] rtc_cmos 00:02: RTC can wake from S4
[    0.317344] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.317370] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.317551] device-mapper: uevent: version 1.0.3
[    0.339234] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: newbielink:mailto:dm-devel@redhat.com [nonactive]
[    0.342642] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.355758] device-mapper: multipath: version 1.1.0 loaded
[    0.355765] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.356015] EISA: Probing bus 0 at eisa.0
[    0.356056] EISA: Detected 0 cards.
[    0.371600] cpuidle: using governor ladder
[    0.371605] cpuidle: using governor menu
[    0.372312] TCP cubic registered
[    0.372540] NET: Registered protocol family 10
[    0.373904] NET: Registered protocol family 17
[    0.373974] Using IPI No-Shortcut mode
[    0.374108] PM: Resume from disk failed.
[    0.374128] registered taskstats version 1
[    0.374987]   Magic number: 12:827:384
[    0.374999] usb usb2: hash matches
[    0.375086] rtc_cmos 00:02: setting system clock to 2012-09-20 14:21:43 UTC (1348150903)
[    0.375090] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.375093] EDD information not available.
[    0.449995] Freeing initrd memory: 7809k freed
[    0.467267] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4081B, A102, max UDMA/66
[    0.467448] ata3.00: ATA-7: Maxtor 6Y160M0, YAR51EW0, max UDMA/133
[    0.467452] ata3.00: 320173056 sectors, multi 16: LBA48
[    0.483981] ata2.00: configured for UDMA/66
[    0.484107] ata3.00: configured for UDMA/133
[    0.643742] isapnp: No Plug & Play device found
[    0.648989] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4081B A102 PQ: 0 ANSI: 5
[    0.664511] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.664516] Uniform CD-ROM driver Revision: 3.20
[    0.664649] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.664727] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    0.664911] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6Y160M0   YAR5 PQ: 0 ANSI: 5
[    0.665080] sd 2:0:0:0: [sda] 320173056 512-byte logical blocks: (163 GB/152 GiB)
[    0.665124] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    0.665183] sd 2:0:0:0: [sda] Write Protect is off
[    0.665188] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.665258] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    0.665486]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    0.704127] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.704148] Freeing unused kernel memory: 664k freed
[    0.704718] Write protecting the kernel text: 4700k
[    0.704780] Write protecting the kernel read-only data: 1852k
[    0.731210] udev: starting version 151
[    0.787540] usb 1-7: new high speed USB device using ehci_hcd and address 4
[    0.865467]   alloc irq_desc for 21 on node -1
[    0.865473]   alloc kstat_irqs on node -1
[    0.865486] skge 0000:01:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.865537] skge 1.13 addr 0xfc9f8000 irq 21 chip Yukon-Lite rev 9
[    0.866880] skge eth0: addr 00:15:e9:40:cf:7f
[    0.874086] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.874091] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.874156]   alloc irq_desc for 20 on node -1
[    0.874161]   alloc kstat_irqs on node -1
[    0.874173] e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.897134] e100 0000:01:08.0: PME# disabled
[    0.932314] usb 1-7: configuration #1 chosen from 1 choice
[    0.940784] e100: eth1: e100_probe: addr 0xfc9ff000, irq 20, MAC addr 00:0c:f1:f5:81:eb
[    1.000556] Floppy drive(s): fd0 is 1.44M
[    1.010605] Initializing USB Mass Storage driver...
[    1.010810] scsi4 : SCSI emulation for USB Mass Storage devices
[    1.010967] usbcore: registered new interface driver usb-storage
[    1.010971] USB Mass Storage support registered.
[    1.011246] usb-storage: device found at 4
[    1.011250] usb-storage: waiting for device to settle before scanning
[    1.019148] FDC 0 is a post-1991 82077
[    1.043314] usb 1-8: new high speed USB device using ehci_hcd and address 5
[    1.182778] usb 1-8: configuration #1 chosen from 1 choice
[    1.183148] hub 1-8:1.0: USB hub found
[    1.183667] hub 1-8:1.0: 2 ports detected
[    1.379450] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[    1.379460] EXT4-fs (sda6): write access will be enabled during recovery
[    1.425023] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    1.600213] usb 3-1: configuration #1 chosen from 1 choice
[    1.615909] usbcore: registered new interface driver hiddev
[    1.651282] generic-usb 0003:0764:0501.0001: hiddev96,hidraw0: USB HID v1.10 Device [CP1000PFCLCD CRDA103.981] on usb-0000:00:1d.1-1/input0
[    1.651343] usbcore: registered new interface driver usbhid
[    1.651349] usbhid: v2.6:USB HID core driver
[    1.840048] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    1.960033] usb 4-1: device descriptor read/64, error -71
[    2.184018] usb 4-1: device descriptor read/64, error -71
[    2.400015] usb 4-1: new low speed USB device using uhci_hcd and address 3
[    2.520013] usb 4-1: device descriptor read/64, error -71
[    2.748014] usb 4-1: device descriptor read/64, error -71
[    2.964014] usb 4-1: new low speed USB device using uhci_hcd and address 4
[    3.372014] usb 4-1: device not accepting address 4, error -71
[    3.484013] usb 4-1: new low speed USB device using uhci_hcd and address 5
[    3.892020] usb 4-1: device not accepting address 5, error -71
[    3.892031] hub 4-0:1.0: unable to enumerate USB device on port 1
[    5.575530] EXT4-fs (sda6): recovery complete
[    5.603023] EXT4-fs (sda6): mounted filesystem with ordered data mode
[    6.008636] usb-storage: device scan complete
[    6.012958] scsi 4:0:0:0: Direct-Access     Foxconn  CF  USB2.0 Card  9440 PQ: 0 ANSI: 0
[    6.017197] scsi 4:0:0:1: Direct-Access     Foxconn  SM  USB2.0 Card  9440 PQ: 0 ANSI: 0
[    6.021443] scsi 4:0:0:2: Direct-Access     Foxconn  SD  USB2.0 Card  9440 PQ: 0 ANSI: 0
[    6.025690] scsi 4:0:0:3: Direct-Access     Foxconn  MS  USB2.0 Card  9440 PQ: 0 ANSI: 0
[    6.026352] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    6.026580] sd 4:0:0:1: Attached scsi generic sg3 type 0
[    6.026808] sd 4:0:0:2: Attached scsi generic sg4 type 0
[    6.027042] sd 4:0:0:3: Attached scsi generic sg5 type 0
[    6.033059] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[    6.034424] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    6.035799] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[    6.037174] sd 4:0:0:3: [sde] Attached SCSI removable disk
[   18.103595] Adding 570268k swap on /dev/sda5.  Priority:-1 extents:1 across:570268k
[   18.128682] udev: starting version 151
[   18.177051] lp: driver loaded but no devices found
[   18.297522] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.299310] intel_rng: Firmware space is locked read-only. If you can't or
[   18.299313] intel_rng: don't want to disable this in firmware setup, and if
[   18.299315] intel_rng: you are certain that your system has a functional
[   18.299318] intel_rng: RNG, try using the 'no_fwh_detect' option.
[   18.307969] Linux agpgart interface v0.103
[   18.436931] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[   18.439870] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[   18.775674] parport_pc 00:09: reported by Plug and Play ACPI
[   18.775737] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   18.778046] [drm] Initialized drm 1.1.0 20060810
[   18.794487] Linux video capture interface: v2.00
[   18.872412] lp0: using parport0 (interrupt-driven).
[   18.904549] ppdev: user-space parallel port driver
[   18.908893] bttv: driver version 0.9.18 loaded
[   18.908899] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   18.909353] bttv: Bt8xx card found (0).
[   18.909379]   alloc irq_desc for 22 on node -1
[   18.909383]   alloc kstat_irqs on node -1
[   18.909393] bttv 0000:02:08.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   18.909408] bttv0: Bt878 (rev 17) at 0000:02:08.0, irq: 22, latency: 32, mmio: 0xe07f0000
[   18.909446] bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
[   18.909451] IRQ 22/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[   18.909497] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[   18.950244] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[   18.950302]   alloc irq_desc for 17 on node -1
[   18.950306]   alloc kstat_irqs on node -1
[   18.950316] cx8800 0000:01:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   18.950936] cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected], frontend(s): 1
[   18.950941] cx88[0]: TV tuner type 60, Radio tuner type -1
[   19.028627] skge eth0: enabling interface
[   19.029955] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
[   19.044448] psmouse serio1: ID: 10 00 64
[   19.053940] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.087464] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   19.087500] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   19.137779] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   19.139853] nouveau 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.140152] e100: eth1 NIC Link is Up 100 Mbps Full Duplex
[   19.148652] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   19.182595] [drm] nouveau 0000:03:00.0: Detected an NV30 generation card (0x034200b1)
[   19.182675] [drm] nouveau 0000:03:00.0: Attempting to load BIOS image from PROM
[   19.258740] tuner 1-0043: chip found @ 0x86 (cx88[0])
[   19.330837] tda9887 1-0043: creating new instance
[   19.330843] tda9887 1-0043: tda988[5/6/7] found
[   19.370524] tuner 1-0061: chip found @ 0xc2 (cx88[0])
[   19.440627] [drm] nouveau 0000:03:00.0: ... appears to be valid
[   19.441047] [drm] nouveau 0000:03:00.0: BMP BIOS found
[   19.441051] [drm] nouveau 0000:03:00.0: BMP version 5.39
[   19.441055] [drm] nouveau 0000:03:00.0: Bios version 04.34.20.22
[   19.441060] [drm] nouveau 0000:03:00.0: Found Display Configuration Block version 2.2
[   19.441065] [drm] nouveau 0000:03:00.0: Raw DCB entry 0: 01000300 000088b8
[   19.441069] [drm] nouveau 0000:03:00.0: Raw DCB entry 1: 02010321 00000003
[   19.441174] [drm] nouveau 0000:03:00.0: Loading NV17 power sequencing microcode
[   19.441179] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xE947
[   19.509099] intel8x0_measure_ac97_clock: measured 52126 usecs (2513 samples)
[   19.509106] intel8x0: clocking to 48000
[   19.596522] tuner-simple 1-0061: creating new instance
[   19.596527] tuner-simple 1-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
[   19.600713] input: cx88 IR (pcHDTV HD3000 HDTV) as /devices/pci0000:00/0000:00:1e.0/0000:01:02.0/input/input4
[   19.601182] cx88[0]/0: found at 0000:01:02.0, rev: 5, irq: 17, latency: 32, mmio: 0xfa000000
[   19.601205] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   19.601616] cx88[0]/0: registered device video0 [v4l2]
[   19.601990] cx88[0]/0: registered device vbi0
[   19.602373] cx88[0]/0: registered device radio0
[   19.604260] cx88[0]/2: cx2388x 8802 Driver Manager
[   19.604289] cx88-mpeg driver manager 0000:01:02.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   19.604301] cx88[0]/2: found at 0000:01:02.2, rev: 5, irq: 17, latency: 32, mmio: 0xfb000000
[   19.604317] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   19.635348] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5
[   19.675758] cx88/2: cx2388x dvb driver version 0.0.7 loaded
[   19.675765] cx88/2: registering cx8802 driver, type: dvb access: shared
[   19.675772] cx88[0]/2: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22]
[   19.675777] cx88[0]/2: cx2388x based DVB/ATSC card
[   19.675780] cx8802_alloc_frontends() allocating 1 frontend(s)
[   19.681044] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xEB87
[   19.681057] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xECCD
[   19.681096] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xEE53
[   19.681103] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xEE70
[   19.681110] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 5 at offset 0xEE8D
[   19.689050] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 6 at offset
« Last Edit: September 22, 2012, 12:15:45 am by inb »

l3mce

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1081
    • View Profile
Re: P4 2.5GB + HDTV3000 + Kodicom 8ch + HDHomerun + CM15A
« Reply #1 on: September 21, 2012, 11:02:14 pm »
1: How many physical rj45 interfaceable network cards do you have in the machine?

2: Have you tried the DVD?
I never quit... I just ping out.

inb

  • Making baby steps
  • Posts: 2
    • View Profile
Re: P4 2.5GB + HDTV3000 + Kodicom 8ch + HDHomerun + CM15A
« Reply #2 on: September 22, 2012, 12:06:12 am »
I have the mobo connector at 100 (external) and I added a PCI Gigabit which I plan to use as internal.
I tried the Linux MCE DVD first as stated (headless, then mixed), then installed Kubuntu from its DVD.

l3mce

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1081
    • View Profile
Re: P4 2.5GB + HDTV3000 + Kodicom 8ch + HDHomerun + CM15A
« Reply #3 on: September 22, 2012, 12:33:06 am »
Sorry for misreading your first post re: DVD install.

You are not chrooting or anything into this install are you? The net install does NOT support multiboot. That can ONLY be done with the DVD.

Nothing should screw up grub from DVD _UNLESS_ you are installing to a drive which is not the first in boot order. We explicitly prevent screwing with grub in this circumstance to avoid screwing up RAIDS etc. You will have to grub-install /dev/sd(x); update-grub after install. This can be done from the DVD prior to hitting the "reboot" button, by switching to tty2, running the commands, then switching back afterwards and actually pushing the button (do not just type sudo reboot).




« Last Edit: September 22, 2012, 12:37:28 am by l3mce »
I never quit... I just ping out.