Author Topic: PLCBus 1141 RS232 cannot connect with PLCBus 2027 [solved]  (Read 1142 times)

Jicky

  • Regular Poster
  • **
  • Posts: 19
    • View Profile
PLCBus 1141 RS232 cannot connect with PLCBus 2027 [solved]
« on: February 06, 2012, 08:06:56 pm »
Hi All,

Anybody have successfully to connected the PLCBus 2027 appliance to Linuxmce? I had added the PLCBus 1141 RS232 to linuxmce and it had "buzzes" sound, is it means successfully to connected? After that adedd a Light switch (on/off) for PLCBus 2027, and pressed the 2027 setup button until it blinking, and I tried to send on command to it, the 1141 was had "buzzes" sound when I sending the on command. But PLCBus 2027 still not working. Anyone else can help me on this issue?

I was checking the PLCBUS log while pressed the on command, it was came out "Sendcount exceed, this was the last sent attempt, removing job... <0xb70adb90>"

Thanks
« Last Edit: February 08, 2012, 05:58:28 pm by Jicky »

bongowongo

  • wants to work for LinuxMCE
  • **
  • Posts: 826
    • View Profile
Re: PLCBus 1141 RS232 cannot connect with PLCBus 2027
« Reply #1 on: February 06, 2012, 08:50:26 pm »
Hi All,

Anybody have successfully to connected the PLCBus 2027 appliance to Linuxmce? I had added the PLCBus 1141 RS232 to linuxmce and it had "buzzes" sound, is it means successfully to connected? After that adedd a Light switch (on/off) for PLCBus 2027, and pressed the 2027 setup button until it blinking, and I tried to send on command to it, the 1141 was had "buzzes" sound when I sending the on command. But PLCBus 2027 still not working. Anyone else can help me on this issue?

I was checking the PLCBUS log while pressed the on command, it was came out "Sendcount exceed, this was the last sent attempt, removing job... <0xb70adb90>"

Thanks

I have the same now. What linuxmce are you using? What is the 2027? An appliance switch?

Jicky

  • Regular Poster
  • **
  • Posts: 19
    • View Profile
Re: PLCBus 1141 RS232 cannot connect with PLCBus 2027
« Reply #2 on: February 06, 2012, 09:02:14 pm »
Hi bongowongo,

I'm using linuxmce 0810. Yes, 2027 is an appliance module.

Gangsingen

  • Veteran
  • ***
  • Posts: 54
    • View Profile
Re: PLCBus 1141 RS232 cannot connect with PLCBus 2027
« Reply #3 on: February 06, 2012, 10:05:07 pm »
Hi bongowongo,

I'm using linuxmce 0810. Yes, 2027 is an appliance module.


I dont know what wall socket you have where you live, but in europe we have to make sure that the plug-in modules are inserted in the wall socket the right way, try to plug it in upside down" if your socket allows you to do that.

Jicky

  • Regular Poster
  • **
  • Posts: 19
    • View Profile
Re: PLCBus 1141 RS232 cannot connect with PLCBus 2027
« Reply #4 on: February 07, 2012, 04:32:39 am »
I dont know what wall socket you have where you live, but in europe we have to make sure that the plug-in modules are inserted in the wall socket the right way, try to plug it in upside down" if your socket allows you to do that.

In Malaysia we're using the UK type wall socket.

Jicky

  • Regular Poster
  • **
  • Posts: 19
    • View Profile
Re: PLCBus 1141 RS232 cannot connect with PLCBus 2027
« Reply #5 on: February 10, 2012, 07:30:33 am »
I have the same now. What linuxmce are you using? What is the 2027? An appliance switch?

Hi Bongowongo,

Do you solve the problem already? you're using the X10 2027 appliance switch or PLCBUS 2027 appliance switch? and your is 1 phase or 3 phase electric?

regards,
Jicky

bongowongo

  • wants to work for LinuxMCE
  • **
  • Posts: 826
    • View Profile
Re: PLCBus 1141 RS232 cannot connect with PLCBus 2027 [solved]
« Reply #6 on: February 11, 2012, 06:42:54 pm »
I have 1 phase
and now I have 2267H module.