Author Topic: AV Wizard does not run - 10.04  (Read 2779 times)

kyfalcon

  • Guru
  • ****
  • Posts: 390
    • View Profile
Re: AV Wizard does not run - 10.04
« Reply #15 on: April 12, 2012, 07:16:05 pm »
That is my fault.

The next build should be resolved. Sorry for the confusion. In the meantime you can replace your /usr/pluto/bin/Utils.sh file with this.
Code: [Select]
#!/bin/bash

if [[ -n "$HEADER_Utils" ]]; then
    return 0
fi
HEADER_Utils=included

. /usr/pluto/bin/SQL_Ops.sh
. /usr/pluto/bin/Config_Ops.sh

DEVICETEMPLATE_OnScreen_Orbiter=62
DEVICEDATA_Use_OpenGL_effects=172
DEVICEDATA_Use_alpha_blended_UI=169
DEVICEDATA_PK_UI=104

function AddBookmark {
    return 0
    Url="$1"
    Name="$2"

    [[ ! -f /home/public/bookmarks.html ]] || return 0

    # Generate an id for this bookmark
    ID=$(echo "$Url" | sha1sum)
    ID='rdf:#$'${ID:0:6}

    # Generate the bookmark entry
    Bookmark='   <DT><A HREF="'$Url'" ADD_DATE="1126869382" LAST_MODIFIED="1126869442" ID="'$ID'">'$Name'</A>'
    Bookmark=$(echo $Bookmark | sed 's/"/\\\"/g')

    for BookmarksFile in /home/public/bookmarks.html /home/user_*/bookmarks.html ;do
        # See if the bookmark is already there
        if grep -q "ID=\"$ID\"" $BookmarksFile ;then
            continue
        fi

        # Add the bookmark string to the file
        awk '
            BEGIN { HR=0 }
            HR==0 && /<HR>/ {print "'"$Bookmark"'"; HR=1}
            {print}
        ' $BookmarksFile > $BookmarksFile.$$
        mv $BookmarksFile.$$ $BookmarksFile
    done

}

function DelBookmark {
    return 0
    Url="$1"
    Name="$2"

    [[ ! -f /home/public/bookmarks.html ]] || return 0

    # Generate an id for this bookmark
    ID=$(echo "$Url" | sha1sum)
    ID='rdf:#$'${ID:0:6}
   
    for BookmarksFile in /home/public/bookmarks.html /home/user_*/bookmarks.html ;do
        grep -v "ID=\"$ID\"" $BookmarksFile >> $BookmarksFile.$$
        mv $BookmarksFile.$$ $BookmarksFile
    done
}

TranslateSerialPort()
{
    local SearchFor="$1"
    local PCI USB

    SerialPort=
    if [[ "$SearchFor" == pci* ]]; then
        if [[ -d /sys/class/tty ]]; then
            pushd /sys/class/tty &>/dev/null
            for dev in ttyUSB*/device ttyACM*/device; do
                id=$(readlink -f "$dev" | sed -r 's,^.*(pci.*)/usb[0-9]*/[0-9./-]*/[0-9]*-([0-9.]*):[0-9.]*(/ttyUSB[0-9]*)?$,\1+\2,g')
                if [[ "$id" == "$SearchFor" ]]; then
                    SerialPort="/dev/$(dirname "$dev")"
                    break;
                fi
            done
            popd &>/dev/null
        fi
    else
        SerialPort="$SearchFor"
    fi

    builtin echo "$SerialPort"
}

TranslateSoundCard()
{
    local SoundCard="$1" AlsaCard=
    local PCI USB
    local Cards Card Dev

    if [[ -d /sys/class/sound && "$SoundCard" == pci* ]]; then
        if [[ "$SoundCard" == *+* ]]; then
            PCI="${SoundCard%+*}"
            USB="${SoundCard#*+}"
        else
            PCI="${SoundCard}"
            USB=
        fi
        pushd /sys/class/sound &>/dev/null
        Cards=$(find -name 'controlC*')
        for Card in $Cards; do
            Card="${Card#./}"
            Dev=$(readlink "$Card/device"|cut -f3 -d/)
            if [[ -n "$USB" ]]; then
                if [[ "$Dev" == *"$PCI"*usb*"$USB:"* ]]; then
                    AlsaCard="${Card#controlC}"
                    break
                fi
            else
                if [[ "$PCI" == *"$Dev" ]]; then
                    AlsaCard="${Card#controlC}"
                    break
                fi
            fi
        done
        popd &>/dev/null
    fi

    builtin echo "$AlsaCard"
}

UseAlternativeLibs()
{
    export LD_LIBRARY_PATH=/opt/libsdl/lib:/opt/libxine/lib:/opt/libsdl1.2-1.2.7+1.2.8cvs20041007/lib:/opt/linphone-1.3.5/lib
}

function ListTemplates_Category {
    local FK_DeviceCategory_Parent="$1"
    local PK_DeviceTemplate_List=""
    local PK_DeviceCategory=""
    local PK_DeviceTemplate=""

    R=$(RunSQL "SELECT PK_DeviceCategory FROM DeviceCategory WHERE FK_DeviceCategory_Parent = $FK_DeviceCategory_Parent")
    for PK_DeviceCategory in $R ;do
        PK_DeviceTemplate_List="$PK_DeviceTemplate_List $(ListTemplates_Category "$PK_DeviceCategory")"
    done

    R=$(RunSQL "SELECT PK_DeviceTemplate FROM DeviceTemplate WHERE FK_DeviceCategory=$FK_DeviceCategory_Parent")
    for PK_DeviceTemplate in $R ;do
        PK_DeviceTemplate_List="$PK_DeviceTemplate_List $PK_DeviceTemplate"
    done

    echo $PK_DeviceTemplate_List
}


FindDevice_Template()
{
    local PK_Device_Parent="${1//\'}" FK_DeviceTemplate="${2//\'}" NoRecursion="$3" IncludeParent="$4" All="$5"
    local Limit Found=0

    if [[ -z "$PK_Device_Parent" || -z "$FK_DeviceTemplate" ]]; then
        echo ""
        return 1
    fi

    if [[ -z "$All" ]]; then
        Limit="LIMIT 1"
    fi

    local i R Q
    if [[ "$PK_Device_Parent" == 0 ]]; then
        Q="
            SELECT PK_Device
            FROM Device
            WHERE FK_Device_ControlledVia IS NULL AND FK_DeviceTemplate IN ($FK_DeviceTemplate)
            $Limit
        "
    elif [[ -z "$IncludeParent" ]]; then
        Q="
            SELECT PK_Device
            FROM Device
            WHERE FK_Device_ControlledVia='$PK_Device_Parent' AND FK_DeviceTemplate IN ($FK_DeviceTemplate)
            $Limit
        "
    else
        Q="
            SELECT PK_Device
            FROM Device
            WHERE (FK_Device_ControlledVia='$PK_Device_Parent' OR PK_Device='$PK_Device_Parent') AND FK_DeviceTemplate IN ($FK_DeviceTemplate))
            $Limit
        "
    fi
    R="$(RunSQL "$Q")"

    if [[ -n "$R" ]]; then
        echo "$R"
    fi

    if [[ ( -z "$R" || -n "$All" ) && -z "$NoRecursion" ]]; then
        Q="SELECT PK_Device FROM Device WHERE FK_Device_ControlledVia='$PK_Device_Parent'"
        R="$(RunSQL "$Q")"
        for i in $R; do
            if FindDevice_Template "$i" "$FK_DeviceTemplate" "" "" "$All"; then
                if [[ -z "$All" ]]; then
                    return 0
                else
                    Found=1
                fi
            fi
        done
    else
        return 1
    fi

    [[ "$Found" -eq 1 ]]
    return $?
}

FindDevice_Category()
{
    local PK_Device_Parent="${1//\'}" FK_DeviceCategory="${2//\'}" NoRecursion="$3" IncludeParent="$4" All="$5"
    local Limit Found=0

    if [[ -z "$PK_Device_Parent" || -z "$FK_DeviceCategory" ]]; then
        echo ""
        return 1
    fi

    if [[ -z "$All" ]]; then
        Limit="LIMIT 1"
    fi

    local i R Q
    if [[ "$PK_Device_Parent" == 0 ]]; then
        Q="
            SELECT PK_Device
            FROM Device
            JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate
            WHERE FK_Device_ControlledVia IS NULL AND FK_DeviceCategory IN ($FK_DeviceCategory)
            $Limit
        "
    elif [[ -z "$IncludeParent" ]]; then
        Q="
            SELECT PK_Device
            FROM Device
            JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate
            WHERE FK_Device_ControlledVia='$PK_Device_Parent' AND FK_DeviceCategory IN ($FK_DeviceCategory)
            $Limit
        "
    else
        Q="
            SELECT PK_Device
            FROM Device
            JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate
            WHERE (FK_Device_ControlledVia='$PK_Device_Parent' OR PK_Device='$PK_Device_Parent') AND FK_DeviceCategory IN ($FK_DeviceCategory)
            $Limit
        "
    fi
    R="$(RunSQL "$Q")"

    if [[ -n "$R" ]]; then
        echo "$R"
    fi

    if [[ ( -z "$R" || -n "$All" ) && -z "$NoRecursion" ]]; then
        Q="SELECT PK_Device FROM Device WHERE FK_Device_ControlledVia='$PK_Device_Parent'"
        R="$(RunSQL "$Q")"
        for i in $R; do
            if FindDevice_Category "$i" "$FK_DeviceCategory" "" "" "$All"; then
                if [[ -z "$All" ]]; then
                    return 0
                else
                    Found=1
                fi
            fi
        done
    else
        return 1
    fi

    [[ "$Found" -eq 1 ]]
    return $?
}

# Get the device number for the parent of the given device
# Returns: number or empty string
GetDeviceParent()
{
    local PK_Device="$1"
    Q="
        SELECT FK_Device_ControlledVia
        FROM Device
        WHERE PK_Device='$PK_Device'
    "
    local R=$(RunSQL "$Q")
   
    if [[ "$R" == NULL ]]; then
        R=""
    fi
    echo "$R"
}

# Delete a device and make its children top level
# Does exactly the same thing as CMD_Delete_Device in General_Info_Plugin
DeleteDevice()
{
    local PK_Device="$1"
    local Q R

    # Delete embedded devices
    Q="SELECT PK_Device FROM Device where FK_Device_RouteTo=$PK_Device"
    R=$(RunSQL "$Q")
    for Device in $R; do
        DeleteDevice "$Device"
    done

    local -a Queries
    Queries=(
        "UPDATE Device SET FK_Device_ControlledVia=NULL WHERE FK_Device_ControlledVia=$PK_Device"
        "DELETE FROM Device WHERE PK_Device=$PK_Device"
        "DELETE FROM CommandGroup_Command WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_Command WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_CommandGroup WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_DeviceData WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_DeviceGroup WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_Device_Related WHERE FK_Device=$PK_Device OR FK_Device_Related=$PK_Device"
        "DELETE FROM Device_EntertainArea WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_HouseMode WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_Orbiter WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_StartupScript WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_Users WHERE FK_Device=$PK_Device"
        "DELETE FROM Package_Device WHERE FK_Device=$PK_Device"
        "DELETE FROM PaidLicense WHERE FK_Device=$PK_Device"
        "DELETE FROM Device_Device_Pipe WHERE FK_Device_From=$PK_Device OR FK_Device_To=$PK_Device"
        "DELETE FROM PaidLicense WHERE FK_Device=$PK_Device"
    )

    for Q in "${Queries[@]}"; do
        RunSQL "$Q"
    done
}

XineConfSet()
{
    local Setting="$1"
    local Value="$2"
    local XineConf="${3:-/etc/pluto/xine.conf}"
   
    [[ -z "$Setting" || -z "$Value" ]] && return 1
   
    if grep -qF "$Setting" "$XineConf"; then
        sed -i "s/^.*$Setting:.*$/$Setting:$Value/" "$XineConf"
    else
        echo "$Setting:$Value" >>"$XineConf"
    fi
}

DeviceIsDisabled()
{
    local PK_Device="$1"
    local R Q

    [[ -z "$PK_Device" ]] && return 1

    Q="SELECT COUNT(*) FROM Device WHERE PK_Device='$PK_Device' AND Disabled=0"
    R=$(RunSQL "$Q")

    if [[ -n "$R" && "$R" -eq 0 ]]; then
        return 0 # Device is disabled or does not exist at all
    else
        return 1 # Device exists and is enabled
    fi
}

FindInArray()
{
    local Value="$1" Array i
    shift
    Array=("$@")
   
    for ((i = 0; i < ${#Array[*]}; i++)); do
        if [[ "${Array[$i]}" == "$Value" ]]; then
            echo "$i"
            return 0
        fi
    done
    return 1
}

FindInArray_Prefix()
{
    local Value="$1" Array i
    shift
    Array=("$@")

    for ((i = 0; i < ${#Array[*]}; i++)); do
        if [[ "${Array[$i]}" == "$Value"* ]]; then
            echo "$i"
            return 0
        fi
    done
    return 1
}

# Verify that the given string is a valid IPv4
ValidIP()
{
    local IP="$1"

    local IPn="[0-9]{1,3}"
    local IPpattern="^($IPn)\\.($IPn)\\.($IPn)\\.($IPn)$"
    local i Number

    # Bash 3.1 requires $IPpattern to be quoted, otherwise it gives a syntax error
    # Bash 3.2 requires $IPpattern to be unquoted, otherwise it fails to match the pattern
    # Ubuntu has Bash 3.2
    if [[ ! "$IP" =~ $IPpattern ]]; then
        return 1
    fi

    for ((i = 1; i <= 4; i++)); do
        Number="${BASH_REMATCH[$i]}"
        if ((Number < 0 || Number > 255)); then
            return 1
        fi
    done

    return 0
}

# Colors and bolds messages
# '\E begin escape sequence
# [XX; is the text color
# XXm' is the background color
# \033 is the an escape
# [1m bold     [0m unbold
# "" around text   '' around color
# COLOR         FOREGROUND      BACKGROUND
# black         30              40
# red           31              41
# green         32              42
# yellow        33              43
# blue          34              44
# magenta       35              45
# cyan          36              46
# white         37              47

StatusMessage () {
    echo -e '\E[33;40m'"\033[1m  $* \033[0m"
}
ErrorMessage () {
    echo -e '\E[33;41m'"\033[1m  $* \033[0m"
}
NotifyMessage () {
    echo -e '\E[32;40m'"\033[1m  $* \033[0m"
}

confirmRoot () {
    testroot="`whoami`"
    if [ "$testroot" != "root" ]; then
        ErrorMessage "Need to be root to run. Exiting"
        exit 1
    fi
}

StartService() {
ServiceDescription="$1"
ServiceCmd="$2"
ServiceBkg="$3"
    if [[ -x $(echo $ServiceCmd | cut -d ' ' -f1) ]] ;then
        if [ -x /bin/plymouth ]; then
            /bin/plymouth update --status="$ServiceDescription ... "
        fi
        echo -n "$ServiceDescription ... "
            if [[ "$ServiceBkg" == "&" ]] ;then
                $ServiceCmd 1>/dev/null 2>/dev/null &
            else
                $ServiceCmd 1>/dev/null 2>/dev/null
            fi
            err=$?
            if [[ "$err" == "0" ]] ;then
                echo "ok"
            else
                echo "fail"
            fi
    fi
        return $err
}

GetVideoDriver () {
        vga_pci=$(lspci -v | grep -i 'VGA')
        prop_driver="vesa"
        chip_man=$(echo "$vga_pci" | grep -Eo '(ATI|VIA|nVidia|Intel)')
        case $chip_man in
                nVidia)
                prop_driver="nvidia" ;;
                ATI)
                            prop_driver="fglrx"
                        if echo "$vga_pci" | grep -Ei '((r5|r6|r7)|(9|X|ES)(1|2?)([0-9])(5|0)0|Xpress)'; then
                                prop_driver="radeon"; fi ;;

                Intel)
                        prop_driver="intel"
                        if echo $vga_pci | grep "i740"; then
                                prop_driver="i740"; fi
                        if echo $vga_pci | grep "i128"; then
                                prop_driver="i128"; fi ;;

                VIA)
                        prop_driver="openchrome" ;
            if echo $vga_pci | grep -i "Savage"; then
                prop_driver="savage"; fi
            #if echo $vga_pci | grep -i "s3"; then
                #prop_driver="via"; fi
            if echo $vga_pci | grep -i "virge"; then
                                   prop_driver="virge"; fi ;;
        *)
            prop_driver="vesa"
        esac

}

InstallVideoDriver () {
    case "$prop_driver" in
            nvidia)
            if ! PackageIsInstalled nvidia-glx && ! PackageIsInstalled nvidia-glx-new && ! PackageIsInstalled nvidia-glx-71 && ! PackageIsInstalled nvidia-glx-96 && ! PackageIsInstalled nvidia-glx-173 && ! PackageIsInstalled nvidia-glx-180 && ! PackageIsInstalled nvidia-glx-190 && ! PackageIsInstalled nvidia-glx-195 && ! PackageIsInstalled nvidia-glx-260 && ! PackageIsInstalled nvidia-glx-185 && ! PackageIsInstalled nvidia-current; then
                apt-get -yf install pluto-nvidia-video-drivers
                VerifyExitCode "Install Pluto nVidia Driver"
                nv_pid=$(pidof nvidia-install.sh)
                    if [[ -n $nv_pid ]] ; then
                        StatusMessage "Installing nVidia driver this may take a few minutes"
                        installCorrectNvidiaDriver
                    else StartService "Installing nVidia driver this may take a few minutes" ". /usr/pluto/bin/nvidia-install.sh"
                        installCorrectNvidiaDriver
                    fi
            fi ;;
        nouveau)
            if ! PackageIsInstalled xserver-xorg-video-nouveau; then
                apt-get -yf install xserver-xorg-video-nouveau
                VerifyExitCode "Install nouveau Driver"
            fi ;;
        radeon)
            if ! PackageIsInstalled xserver-xorg-video-radeon; then
                apt-get -yf install xserver-xorg-video-radeon
                VerifyExitCode "Install radeon Driver"
            fi ;;
        fglrx)
            if ! PackageIsInstalled fglrx; then
                apt-get -yf install fglrx
                VerifyExitCode "Install fglrx Driver"
            fi ;;
        intel)
            if ! PackageIsInstalled xserver-xorg-video-intel; then
                apt-get -yf install xserver-xorg-video-intel
                VerifyExitCode "Install Intel Driver"
            fi ;;
        i128)
            if ! PackageIsInstalled xserver-xorg-video-i128; then
                apt-get -yf install xserver-xorg-video-i128
                VerifyExitCode "Install i128 Driver"
            fi ;;
        i740)
            if ! PackageIsInstalled xserver-xorg-video-i740; then
                apt-get -yf install xserver-xorg-video-i740
                VerifyExitCode "Install i740 Driver"
            fi ;;
        openchrome)
            if ! PackageIsInstalled xserver-xorg-video-openchrome; then
                apt-get -yf install xserver-xorg-video-openchrome
                VerifyExitCode "Install opencrhome Driver"
            fi ;;
        savage)
            if ! PackageIsInstalled xserver-xorg-video-savage; then
                apt-get -yf install xserver-xorg-video-savage
                VerifyExitCode "Install VIA Savage Driver"
            fi ;;
        via)
            if ! PackageIsInstalled xserver-xorg-video-s3; then
                apt-get -yf install xserver-xorg-video-s3
                VerifyExitCode "Install VIA S3 Driver"
            fi ;;
        virge)
            if ! PackageIsInstalled xserver-xorg-video-s3virge; then
                apt-get -yf install xserver-xorg-video-s3virge
                VerifyExitCode "Install VIA S3 Virge Driver"
            fi ;;
                esac
    if [[ "$chip_man" == "Intel" ]] && [[ -z $online ]]; then
        if ! PackageIsInstalled "libva-driver-i965"; then
            apt-get -yf install libva-driver-i965
            VerifyExitCode "Install Intel Graphics Accelerator"
        fi
    fi
}

CheckVideoDriver () {
    GetVideoDriver
    online=$(ping -c 2 google.com)
    card_detail=$(lspci | grep 'VGA' | cut -d':' -f3)
    offline_mismatch=""
    if [[ -f /etc/X11/xorg.conf ]]; then
        # TODO figure out a better way to isolate the video driver in the xorg.conf list of "Driver" options
            cur_driver=$(grep "Driver" /etc/X11/xorg.conf | grep -Eo '(nvidia|nouveau|radeon|fglrx|savage|openchrome|via|virge|intel|i740|i128|vesa)')
        if [[ "$prop_driver" != "$cur_driver" ]] &&  [[ -z $online ]]; then
            offline_mismatch="true"
        elif [[ "$prop_driver" != "$cur_driver" ]] && [[ -n $online ]]; then
            offline_mismatch="false"
        fi
        # Check to see that the appropriate driver is installed by type
        # If current driver is nvidia, check that it is the correct one

        if [[ "$offline_mismatch" == "false" ]] && [[ "$cur_driver" == "nvidia" ]]; then
            StartService "Checking nVidia driver" ". /usr/pluto/bin/nvidia-install.sh"
            current_nvidia=$(getInstalledNvidiaDriver)
            preferred_nvidia=$(getPreferredNvidiaDriver)
        fi

        if [[ "$cur_driver" == "$prop_driver" ]]; then
            StatusMessage "Correct driver '$prop_driver' already loaded"
            exit 0
        # Remove fglrx or nVidia drivers if they are installed, but do not match current requirements
                elif ([[ "$offline_mismatch" == "false" ]]) || ([[ "$offine_mismatch" == "true" ]] && echo "$prop_driver" | grep -Eq '(nouveau|radeon|openchrome)'); then
                        ErrorMessage "Video chipset change detected !!!"
            if [[ "$cur_driver" == "fglrx" ]]; then
                echo ""
                echo ""
                echo ""
                ErrorMessage "Purging fglrx driver due to multiple conflicts"
                apt-get -y remove --purge xorg-driver-fglrx fglrx* --force-yes
                apt-get -y install --reinstall libgl1-mesa-glx libgl1-mesa-dri fglrx-modaliases --force-yes
                dpkg-reconfigure xserver-xorg
                apt-get -y install --reinstall xserver-xorg-core --force-yes
                rm /etc/X11/xorg.conf
                reboot
            elif [[ $cur_driver == "nvidia" ]]; then
                StatusMessage "Removing old nVidia driver"
                apt-get -yf remove $current_driver --force-yes
            fi
       
            # If there is an xorg, but the driver does not match best selection, install driver and run AVWizard
            StatusMessage "Installing video driver '$prop_driver' for $card_detail"
            InstallVideoDriver
            sleep 2
                        ConfSet "AVWizardOverride" "1"
        elif [[ "$offine_mismatch" == "true" ]]; then
            case "$prop_driver" in
                nvidia)
                    prop_driver="nouveau" ;;
                fglrx)
                    prop_driver="radeon" ;;
                savage)
                    prop_driver="openchrome" ;;
                via)
                    prop_driver="openchrome" ;;
                virge)
                    prop_driver="openchrome" ;;
            esac
            if [[ "$prop_driver" != "$cur_driver" ]]; then
                StatusMessage "Installing video driver '$prop_driver' for $card_detail"
                InstallVideoDriver
                sleep 2
                ConfSet "AVWizardOverride" "1"
            fi
                fi
        else
        # If there is no xorg.conf, install driver and run AVWizard
        if [[ -z $online ]]; then
            case "$prop_driver" in
                nvidia)
                    prop_driver="nouveau" ;;
                fglrx)
                    prop_driver="radeon" ;;
                savage)
                    prop_driver="openchrome" ;;
                via)
                    prop_driver="openchrome" ;;
                virge)
                    prop_driver="openchrome" ;;
            esac
        fi
        StatusMessage "/etc/X11/xorg.conf is missing. Installing video driver '$prop_driver' for $card_detail"
        InstallVideoDriver
        sleep 2
        ConfSet "AVWizardOverride" "1"
        fi
VideoDriver="$prop_driver"
}

ReloadDevicesOnThisMachine()
{
    for Dev in $(cat /usr/pluto/locks/pluto_spawned_local_devices.txt); do
        /usr/pluto/bin/MessageSend "$DCERouter" 0 "$Dev" 7 1 163 "Utils.sh ReloadDevicesOnThisMachine"
    done
}

OpenGLeffects()
{
    local Q

    Q="
        SELECT IK_DeviceData
        FROM Device
        LEFT JOIN Device AS Parent ON Parent.PK_Device=Device.FK_Device_ControlledVia
        JOIN Device_DeviceData ON Device.PK_Device=FK_Device
        WHERE
            Device.FK_DeviceTemplate='$DEVICETEMPLATE_OnScreen_Orbiter'
            AND (
                Device.FK_Device_ControlledVia='$PK_Device'
                OR Parent.FK_Device_ControlledVia='$PK_Device'
            )
        AND FK_DeviceData='$DEVICEDATA_Use_OpenGL_effects'
    "
    RunSQL "$Q"
}

AlphaBlendingEnabled()
{
    local Q

    Q="
        SELECT IK_DeviceData
        FROM Device
        LEFT JOIN Device AS Parent ON Parent.PK_Device=Device.FK_Device_ControlledVia
        JOIN Device_DeviceData ON Device.PK_Device=FK_Device
        WHERE
            Device.FK_DeviceTemplate='$DEVICETEMPLATE_OnScreen_Orbiter'
            AND (
                Device.FK_Device_ControlledVia='$PK_Device'
                OR Parent.FK_Device_ControlledVia='$PK_Device'
            )
        AND FK_DeviceData='$DEVICEDATA_Use_alpha_blended_UI'
    "
    RunSQL "$Q"
}

GetDeviceData()
{
    local Q
    local Device="$1" DeviceData="$2"

    Q="
        SELECT IK_DeviceData
        FROM Device_DeviceData
        WHERE FK_Device='$Device' AND FK_DeviceData='$DeviceData'
    "
    Field 1 "$(RunSQL "$Q")"
}

SetDeviceData()
{
    local Q
    local Device="$1" DeviceData="$2" Value="$3"

    Q="
        UPDATE Device_DeviceData
        SET IK_DeviceData='$Value'
        WHERE FK_Device=$Device AND FK_DeviceData=$DeviceData
    "
    RunSQL "$Q"
}

UI_SetOptions()
{
    local OrbiterDev="$1"
    local OpenGLeffects="$2"
    local AlphaBlending="$3"
    local UI_Version="$4"

    # disable OpenGL effects
    Q="
        REPLACE INTO Device_DeviceData(FK_Device, FK_DeviceData, IK_DeviceData)
        VALUES('$OrbiterDev', '$DEVICEDATA_Use_OpenGL_effects', '$OpenGLeffects')
    "
    RunSQL "$Q"
    # disable alpha blending
    Q="
        REPLACE INTO Device_DeviceData(FK_Device, FK_DeviceData, IK_DeviceData)
        VALUES('$OrbiterDev', '$DEVICEDATA_Use_alpha_blended_UI', '$AlphaBlending')
    "
    RunSQL "$Q"
    # select UI
    Q="
        REPLACE INTO Device_DeviceData(FK_Device, FK_DeviceData, IK_DeviceData)
        VALUES('$OrbiterDev', '$DEVICEDATA_PK_UI', '$UI_Version')
    "
    RunSQL "$Q"
}

function GeneratePassword() {
    #TODO: Replace with this --->  </dev/urandom tr -dc A-Za-z0-9_ | head -c8
        local -a alpha1=(Q W E R T Y U I O P A S D F G H J K L Z X C V B N M)
        local -a alpha2=(q w e r t y u i o p a s d f g h j k l z x c v b n m)
        local -a alpha3=(1 2 3 4 5 6 7 8 9 0)

        local pass=""
        pass=$pass"${alpha1[$(($RANDOM%26))]}${alpha1[$(($RANDOM%26))]}${alpha1[$(($RANDOM%26))]}"
        pass=$pass"${alpha2[$(($RANDOM%26))]}${alpha2[$(($RANDOM%26))]}${alpha2[$(($RANDOM%26))]}"
        pass=$pass"${alpha3[$(($RANDOM%10))]}${alpha3[$(($RANDOM%10))]}"

        local fromwhere=$(( $RANDOM % 3 + 1 ))
        [[ $fromwhere == 1 ]] && pass=$pass"${alpha1[$(($RANDOM%26))]}"
        [[ $fromwhere == 2 ]] && pass=$pass"${alpha2[$(($RANDOM%26))]}"
        [[ $fromwhere == 3 ]] && pass=$pass"${alpha3[$(($RANDOM%10))]}"


        for i in `seq 1 100` ;do
                local split=$(( $RANDOM % ${#pass} + 1 ))
                pass1=${pass:$split}
                pass2=${pass:0:$split}
                pass="${pass1}${pass2}"
        done

        echo $pass
}

function GeneratePasswordOf6Digits()
{
    local pass
    for ((i = 0; i < 6; i++)); do
        pass="${pass}$((RANDOM % 10))"
    done
    echo "$pass"
}

Log()
{
    local File="$1"; shift
    local Msg="$*"

    echo "LOG: $Msg"
    echo "$Msg" >>"$File"
}


function BlacklistConfFiles()
{
    local file=$1

    if [[ -e /etc/confblacklist ]] ;then
        while read line; do
            if [[ "$line" == "$file" ]] ;then
                return 0
            fi
        done < /etc/confblacklist
    fi

    return 1               
}

function VDRInstalled() {
    # Return true if VDR is installed
    DEVICETEMPLATE_VDR_Plugin="1704"
    Q="SELECT PK_Device FROM Device Where FK_DeviceTemplate = $DEVICETEMPLATE_VDR_Plugin"
    VDRDevice=$(RunSQL "$Q")                                         
    if [ "$VDRDevice" == "" ] ; then                                 
        RETURNVALUE=1                                             
    else                                                             
        RETURNVALUE=0                                             
    fi                                                               
    return $RETURNVALUE
}

Then run the following two commands.
Code: [Select]
sudo sed -i 's/InstallVideoDriver/CheckVideoDriver/g' /usr/pluto/bin/X-CleanupVideo.sh
sudo sed -i 's/InstallVideoDriver/CheckVideoDriver/g' /usr/pluto/bin/Xconfigure.sh

A regular reboot will probably then just dump you into avwizard.


Still not working for me after following those steps. Both MD and Hybrid.

l3mce

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1080
    • View Profile
Re: AV Wizard does not run - 10.04
« Reply #16 on: April 12, 2012, 08:06:00 pm »
Things are screwy.

I had to change a lot of things, and fluffy has not been building for the last several days. Once this problem is resolved on the builder end, you will need to:
Code: [Select]
sudo apt-get update
sudo apt-get upgrade

On reboot:
Code: [Select]
ls /etc/init.d/*start_avwizard If you have both a 0start_avwizard and an a0start_avwizard, you will need to:
Code: [Select]
sudo update-rc.d 0start_avwizard remove
sudo rm /etc/init.d/0start_avwizard

I will report back when it is ready. There are just too many changes to try and patch together when an update should fix it all.
I never quit... I just ping out.

l3mce

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1080
    • View Profile
Re: AV Wizard does not run - 10.04
« Reply #17 on: April 13, 2012, 01:00:41 am »
Ready
I never quit... I just ping out.

kyfalcon

  • Guru
  • ****
  • Posts: 390
    • View Profile
Re: AV Wizard does not run - 10.04
« Reply #18 on: April 13, 2012, 03:48:33 pm »
I will give it a go tonight. One question. I do not want to update any of the mythtv stuff, since I am running my own version of .24 fixes with cable card support. What is the easiest way of doing this?


thanks,
Kevin

l3mce

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1080
    • View Profile
Re: AV Wizard does not run - 10.04
« Reply #19 on: April 13, 2012, 04:13:56 pm »
Code: [Select]
sudo apt-get update
sudo apt-get install pluto-boot-scripts pluto-avwizard
Will probably do it. There are about 7 different file changes, I BELIEVE all of them are contained in those packages.
I never quit... I just ping out.

kyfalcon

  • Guru
  • ****
  • Posts: 390
    • View Profile
Re: AV Wizard does not run - 10.04
« Reply #20 on: April 16, 2012, 07:22:02 pm »
Ok loaded it. The AVWizard comes up but when I choose HDMI I get no sound in AVWizard. I have sound from command prompt and mythtv.

pigdog

  • wants to work for LinuxMCE
  • **
  • Posts: 897
    • View Profile
Re: AV Wizard does not run - 10.04
« Reply #21 on: April 16, 2012, 10:47:52 pm »
Hi,

Don't know if you've been down this rabbit hole before, but look at alsamixer settings, alsa versions and check settings in KDE to see if you can use HDMI for audio.

Try cat /proc/asound/version and compare to alsamixer version

aplay -l

Lots of posts.

Cheers.
« Last Edit: April 16, 2012, 11:01:52 pm by pigdog »

kyfalcon

  • Guru
  • ****
  • Posts: 390
    • View Profile
Re: AV Wizard does not run - 10.04
« Reply #22 on: April 17, 2012, 08:21:15 pm »
Yeah, got my fat arse stuck in that hole. I had it working fine in the past and then my system blew up and had to back up from clonzilla. The problem being that I cloned my system before I got the HDMI working. So what I did was rebuild the alsa drivers etc (24). Added the parts to asound,conf and to sound.conf in the modprobe.d directory. At this point I am able to get sound trough HDMI as I can listen to Sirius radio through my stereo from command prompt. I then comment out all updates in SetupAudioVideo.sh that changes asound.conf. i then call for rerun of AVWizard. When I pick HDMI I get no sound. If I ctrl-alt F2 and log in alsamixer shows my NVIDIA and I have sound through HDMI at the command prompt.

jamo

  • Guru
  • ****
  • Posts: 457
    • View Profile
    • LMCE user Page
Re: AV Wizard does not run - 10.04
« Reply #23 on: April 18, 2012, 09:38:02 am »
I just did a dvd install from snapshot LMCE-1004-20120417030025916 on an old HPXW4100 workstation and all went really smoothly - thanks lmce except, like the others, no AVWizard- just straight to Sarah, with sound and the usual home config etc. I haven't had time to look at the avwizard run log as suggested above or try the other "force avwizard" methods but I did press the More->Advanced->Video Res and Audio setup button to supposedly reboot to AVWizard and no dice.

Will look more closely when at home later. Again, UI1 with low res is no problem as it's core-only ultimately but getting to the bottom of it may help others.

l3mce

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1080
    • View Profile
Re: AV Wizard does not run - 10.04
« Reply #24 on: April 19, 2012, 02:44:39 am »
I am aware of the problem, and have workarounds... I just don't like them.

For you,
sudo rm /etc/X11/xorg.conf
sudo reboot
I never quit... I just ping out.

jamo

  • Guru
  • ****
  • Posts: 457
    • View Profile
    • LMCE user Page
Re: AV Wizard does not run - 10.04
« Reply #25 on: April 19, 2012, 10:36:24 pm »
Hi l3mce

For me (on my hp xw4100 with ATI Radeon RV350) there was no /etc/X11/xorg.conf. It's tricky to determine any of this because although I'm able to come up in UI1 at 640x480 or something similar, I can't even drop to tty2 or open kde.... so I had to boot the install cd to live and mount /dev/sda1  just to see what's up...

Anyway, I had a look at the AVWizard_Run log and it looks as if the issue is with my ATI RV350 graphics card. I may be wrong of course (there was that one time ;-) but it seems to me that the script (AVWizard_Run.sh) is trying to run aticonfig and that there program doesn't like my card.

In the log file
Code: [Select]
/usr/bin/aticonfig: No supported adapters detected

A bit of googling suggests that the proprietory ati drivers no longer support my old card and that the only option is to use the open source driver instead. Does that make sense? Let me know if you have any other suggestions.

l3mce

  • NEEDS to work for LinuxMCE
  • ***
  • Posts: 1080
    • View Profile
Re: AV Wizard does not run - 10.04
« Reply #26 on: April 23, 2012, 03:52:04 am »
Ok... here's the dillio with all that.

There are several pieces which try and "help" install drivers. All of the detection/install stuff other than my new detection scheme is dumb (meaning not actively parsing card types, not that it was written dumbly)... and installs fglrx for anything ATIish. The fglrx drivers screw up the frame buffering for the radeon drivers which my scheme designates when appropriate. I am working to change those bits which install fglrx, but in the meantime I have broken other things. Once I fix what I broke, which requires some change, I will change these things to behave more appropriately.

So... the cheap and greasy answer is to replace the word "radeon" with "fglrx" in your /etc/X11/xorg.conf file, and my detection scheme will say "hey... something isn't right here... oh no... we want radeon but fglrx is installed... lets purge all of that and do it again the right way".
I never quit... I just ping out.

jamo

  • Guru
  • ****
  • Posts: 457
    • View Profile
    • LMCE user Page
Re: AV Wizard does not run - 10.04
« Reply #27 on: April 23, 2012, 09:49:05 am »
Thanks for the feedback, l3.

Will try to have a squizz this evening and see if I can get it running.