Author Topic: USB UIRT IR Issues!  (Read 2213 times)

slampt

  • Veteran
  • ***
  • Posts: 102
    • View Profile
USB UIRT IR Issues!
« on: December 28, 2011, 05:23:57 pm »
Hey Guys,

I added a new MD for my living room, after creating the new MD and setting up the A/V Pipes I have managed to send IR commands using the Webadmin however it doesn't work using any of my orbiters.

I get the following error in my USB UIRT Log

Return code: 127
3   12/29/11 00:15:11   307 (spawning-device)   Device died... count=14/50 dev=307

and this in the DCERouter Log

08   12/29/11 0:15:11.000      Received Message from 85 (foyer orbiter / Foyer/Entrance) to 10 (Media Plug-in / Office), type 1 id 90 Command:Vol Down, retry none, parameters: <0x6c9bab90>
08   12/29/11 0:15:11.000        Parameter 72(Repeat Command):  <0x6c9bab90>
08   12/29/11 0:15:11.001      Received Message from 85 (foyer orbiter / Foyer/Entrance) to 263 (Living Room MD / Living Room), type 1 id 90 Command:Vol Down, retry none, parameters: <0x9cdfdb90>
08   12/29/11 0:15:11.002        Parameter 41(StreamID): 1002 <0x9cdfdb90>
08   12/29/11 0:15:11.002        Parameter 72(Repeat Command):  <0x9cdfdb90>
08   12/29/11 0:15:11.002      Forwarding 90 Command:Vol Down up pipe to 310 (Z-550D) <0xb65edb90>
05   12/29/11 0:15:11.010      Socket::ReceiveData 0x60054418 failed, bytes left 0 start: 1550000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 168 Incoming_Conn Socket 168 192.168.80.2EVENT 307 T=1783 Event #307 <0xb23fdb90>
05   12/29/11 0:15:11.011      Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 168 192.168.80.2EVENT 307 T=1783 Event #307 <0xb23fdb90>
05   12/29/11 0:15:11.011      TCPIP: Closing connection to 307 (Router Dev #0) 0x60054418 m_Socket: -1 <0xb23fdb90>
05   12/29/11 0:15:11.011      Router::RemoveAndDeleteSocket 0x60054418 307 <0xb23fdb90>
05   12/29/11 0:15:11.011      Socket::ReceiveData 0x6005c5c8 failed, bytes left 0 start: 1540000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 9 Incoming_Conn Socket 9 192.168.80.2EVENT 307 T=1783 Event #307 <0x649aab90>
05   12/29/11 0:15:11.011      Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 9 192.168.80.2EVENT 307 T=1783 Event #307 <0x649aab90>
05   12/29/11 0:15:11.011      TCPIP: Closing connection to 307 (Router Dev #0) 0x6005c5c8 m_Socket: -1 <0x649aab90>
05   12/29/11 0:15:11.011      Router::RemoveAndDeleteSocket 0x6005c5c8 307 <0x649aab90>


My other MD works fine. I have confirmed the the pipes are all correct (used A/V Wizard) regen orbiters and reloaded and rebooted (rinse and repeat) yet still no joy.

Any advise or ideas would be greatly appreciated. This setup was working but because my old MD died I installed a new one so created it from scratch :(

Cheers
Slampt.
« Last Edit: December 28, 2011, 05:44:02 pm by slampt »

slampt

  • Veteran
  • ***
  • Posts: 102
    • View Profile
Re: USB UIRT IR Issues!
« Reply #1 on: December 30, 2011, 05:25:21 am »
I still can't seem to figure this out, any advise/ideas would be greatly appreciated!
Rebuilt the image for the MD and still getting the same problem :(

Cheers
Slampt