Author Topic: [SOLVED] Syslog flooded by 'failed to mount'  (Read 2709 times)

brononius

  • Guru
  • ****
  • Posts: 454
  • Trying to keep it simple and centralized...
    • View Profile
    • OnIrIa - linuxMCE blog
[SOLVED] Syslog flooded by 'failed to mount'
« on: January 15, 2012, 08:11:54 am »
Hey,

My syslog is flooded by a lot of problems to mount some disks. This is triggered each minute. So a bit to much information... ;)
Code: [Select]
corius 2012-01-15 07:57:56 ookup(program): lookup for 90 failed Daemon Err
corius 2012-01-15 07:57:56 failed to mount /mnt/device/90 Daemon Err
corius 2012-01-15 07:57:56 lookup(program): lookup for 91 failed Daemon Err
corius 2012-01-15 07:57:56 failed to mount /mnt/device/91 Daemon Err
corius 2012-01-15 07:57:56 lookup(program): lookup for 89 failed Daemon Err
corius 2012-01-15 07:57:56 failed to mount /mnt/device/89

For the moment, i've got only 1 disk in the machine (sda). I was trying to add a second one, but something went/goes wrong there...
Some details from 'sudo fdisk -l':
Code: [Select]
Schijf /dev/sda: 500.1 GB, 500107862016 bytes
255 koppen, 63 sectoren/spoor, 60801 cilinders
Eenheid = cilinders van 16065 * 512 = 8225280 bytes
Schijf-ID: 0x000d6c93

 Apparaat Opstart   Begin       Einde     Blokken   ID  Systeem
/dev/sda1   *           1       59667   479275146   83  Linux
/dev/sda2           59668       60801     9108855    5  Uitgebreid
/dev/sda5           59668       60801     9108823+  82  Linux wisselgeheugen


These are following disks that give problems:
Code: [Select]
Device #89: ST31000340AS (sdb1) on corius
Device #90: ST31000340AS (sdb2) on corius
Device #91: ST31000340AS (sdb1) on corius

Can i safely remove these disks from the 'My Devices / Core' with the option delete this device?
Or must i follow a specific procedure to do this?
« Last Edit: January 16, 2012, 01:26:03 pm by brononi »
Version: linuxMCE 1404, running virtual on ESXi

Orbiters: ASUS eeePAD, Nexus 5, Huwai, web
Automation: EIB technology, KNX IP ROUTER 750
Phones: Cisco 7912-7940-7960
Camera's: Foscam POE

JoakimL

  • Veteran
  • ***
  • Posts: 149
    • View Profile
Re: Syslog flooded by 'failed to mount'
« Reply #1 on: January 15, 2012, 03:15:13 pm »
I had a similar problem, had to do with an Extended NTFS partition. I deleted the device from the Device manager and restarted the Core, problem solved.

/Joakim

brononius

  • Guru
  • ****
  • Posts: 454
  • Trying to keep it simple and centralized...
    • View Profile
    • OnIrIa - linuxMCE blog
Re: Syslog flooded by 'failed to mount'
« Reply #2 on: January 16, 2012, 01:25:40 pm »
Thanks, i've removed the disk from the core, and my logs are more readable... ;)
Version: linuxMCE 1404, running virtual on ESXi

Orbiters: ASUS eeePAD, Nexus 5, Huwai, web
Automation: EIB technology, KNX IP ROUTER 750
Phones: Cisco 7912-7940-7960
Camera's: Foscam POE