AgoControl > Developers

MCE mini install issue on Intel D525MW - realtek 8111 on fedora 12

<< < (2/3) > >>

mcenovice:
I had a new try with the new set of instructions.. unfortunately no luck

following occurs after executing:

sudo ./autorun.sh

msg:

check old driver and unload it.
build the module and install
make: *** /lib/modules/2.6.31.5-127.fc12.x86_64/build: No such file or directory. stop
make[1]: *** [clean] Error 2
make: *** [clean] Error 2




same thing happens when executing :make clean modules

make -C /lib/modules/2.6.31.5-127.fc12.x86_64/build SUBDIRS=/r8168-8.026.00/src
clean
make: Entering unknown directory
make: *** /lib/modules/2.6.31.5-127.fc12.x86_64/build: No such file or directory. stop
make: levaing unknown directory
make[1]: *** [clean] Error 2
make[1]: leaving directory `/r8168-8.026.00/src`
make: *** [clean] Error 2



it seems the build directory is missing ? any ideas ?

hari:
you need to install the kernel headers package for your kernel version

mcenovice:
Hi Hari,

thanks for that.  I have been searching, but is there a way to install the kernel header without an active internet connection?

hari:

--- Quote from: mcenovice on November 10, 2011, 09:08:53 pm ---Hi Hari,

thanks for that.  I have been searching, but is there a way to install the kernel header without an active internet connection?



--- End quote ---
they're contained in an RPM. If you get that elsewhere and copy it via disc/usb stick/whatever you should be set..

mcenovice:
one step furhter - two step back.

installed the header files with command

rpm -ivh kernel-header-2.6.31.5-127.fc12.x86_64.rpm

output:
preparing
1:kernel headers ######################  100%

However, when trying to install the driver

[root@fedor /]# cd r8168-8.026.00
[root@fedor r8168-8.026.00]# make clean modules

i now get:

make -C src/ clean
make[1]: Entering directory `/r8168-8.026.00/src'
make -C /lib/modules/2.6.31.5-127.fc12.x86_64/build SUBDIRS=/r8168-8.026.00/src clean
make[2]: gcc: Command not found
make[2]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.x86_64'
  CLEAN   /r8168-8.026.00/src/.tmp_versions
make[2]: Leaving directory `/usr/src/kernels/2.6.31.5-127.fc12.x86_64'
make[1]: Leaving directory `/r8168-8.026.00/src'
make -C src/ modules
make[1]: Entering directory `/r8168-8.026.00/src'
make -C /lib/modules/2.6.31.5-127.fc12.x86_64/build SUBDIRS=/r8168-8.026.00/src modules
make[2]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.x86_64'
/usr/src/kernels/2.6.31.5-127.fc12.x86_64/arch/x86/Makefile:79: stack protector enabled but no compiler support
make[2]: gcc: Command not found
  CC [M]  /r8168-8.026.00/src/r8168_n.o
/bin/sh: gcc: command not found
make[3]: *** [/r8168-8.026.00/src/r8168_n.o] Error 127
make[2]: *** [_module_/r8168-8.026.00/src] Error 2
make[2]: Leaving directory `/usr/src/kernels/2.6.31.5-127.fc12.x86_64'
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/r8168-8.026.00/src'
make: *** [modules] Error 2


i have tried in the mean time to install GCC, but there i run also into dependency errors.
on cloog.ppl, which leads into dependency on libppl.sp.7 which i can not find anywhere.

since i installed FC12 from the ISO DVD, it seems that the CD does not contain everything needed to compile etc.
is there an easier way to get the full installation for FC12, so that i can compile the network driver and try too install the packages you created for Linuxmce ?

Thanks for the help.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Sitemap 
Go to full version