[Solved] KNX IP ROUTER 750

[hari]

Bus access function (KNXnet/IP Tunneling)

The KNX IP Router 750 can be used as an interface to
KNX/EIB. KNX/EIB can be accessed from any point in the
LAN. For this purpose, a second physical address must
be assigned as described in the ETS Connection Manager
section

[posde]

Just a FYI. This is how I call eibd:

Code:

usr/bin/eibd --no-tunnel-client-queuing -D -T -R -S -i -u --eibaddr=0.0.1 --daemon=/var/log/eibd.log ipt:10.1.2.179

[brononius]

Thanks...
Doesn't seem to help me out. 

Is there a commando i can try on the console to check the proper working between the server and the light relay? This way, i can narrow it down a bit...

[brononius]

Good news? Seems that the connection between the eibd and the hardware is working. When i push a (domotica)button, the debug (=linuxmce server with eibd) is receiving info:

Code:

Layer 0(09E1AB78,4E401AE8) Recv(021): 06 10 04 20 00 15 04 4E 01 00 29 00 B4 E0 11 0C 09 D4 01 00 80
Layer 1(09E1AB78,4E401AE8) Recv(015): 04 4E 01 00 29 00 B4 E0 11 0C 09 D4 01 00 80
Layer 1(09E1AB78,4E401AE8) Send(004): 04 4E 01 00
Layer 0(09E1AB78,4E401AE8) Send(010): 06 10 04 21 00 0A 04 4E 01 00
Layer 1(09E1A680,4E401AE8) Recv L_Data urgent from 1.1.12 to 1/1/212 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 00
Layer 2(09E1A680,4E401AE8) Recv L_Data urgent from 1.1.12 to 1/1/212 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 00
Layer 3(09E3B290,4E401AE8) Recv L_Data urgent from 1.1.12 to 1/1/212 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write (small) 00
Layer 8(09E6BCD0,4E401AE8) Send_Route L_Data urgent from 1.1.12 to 1/1/212 hops: 05 T_DATA_XXX_REQ A_GroupValue_Write (small) 00
Layer 1(09E6BD40,4E401AE8) Send(011): 29 00 B8 D0 11 0C 09 D4 01 00 80
Layer 0(09E6BD40,4E401AE8) Send(017): 06 10 05 30 00 11 29 00 B8 D0 11 0C 09 D4 01 00 80
Layer 4(09E8D0A8,4E401AE8) Recv GroupSocket(002): 00 80
Layer 7(09E9E524,4E401AE8) Recv(002): 00 80
Layer 8(09E8D060,4E401AE8) SendMessage(008): 00 27 11 0C 09 D4 00 80

When i put now 1/1/212 as a port/channel number, it doens't work.
So I suppose it's something wrong with the template?

[hari]

please look at http://forum.linuxmce.org/index.php/topic,11870.0.html and follow the steps.

You should be able to send commands with the groupwrite command line utility. Use the same group address in the template.

br Hari

[brononius]

When i tried the groupwrite command, i see a lot of things happening in the debug, but no lights going on.
  groupwrite ip:192.168.111.1 0/0/3 1
  groupwrite ip:192.168.111.1 0/0/3 1 1
  groupwrite ip:192.168.111.1 1/1/212 1   (this is the group i see in the output when i push a button).

When i check the output, i see it coming from 0.0.0.
Don't i need to configure this somewhere in ETS so that the domotica is listening to it?
I check if i could create a 'dummy' input in ETS, but could'nt find anything about this.


The output

Code:

Layer 8(09FB5620,4E47D2FF) New Connection
Layer 8(09FF7060,4E47D2FF) ClientConnection Init
Layer 8(09FF7060,4E47D2FF) RecvMessage(005): 00 22 00 03 FF
Layer 7(0A0085F4,4E47D2FF) OpenGroup
Layer 4(09FF70A8,4E47D2FF) OpenGroup 0/0/3 WO
Layer 8(09FF7060,4E47D2FF) SendMessage(002): 00 22
Layer 8(09FF7060,4E47D2FF) RecvMessage(005): 00 25 00 80 01
Layer 7(0A0085F4,4E47D2FF) Send(003): 00 80 01
Layer 4(09FF70A8,4E47D2FF) Send Group T_DATA_XXX_REQ A_GroupValue_Write 01
Layer 3(09FA5290,4E47D2FF) Send L_Data low from 0.0.0 to 0/0/3 hops: 07 T_DATA_XXX_REQ A_GroupValue_Write 01
Layer 2(09F84680,4E47D2FF) Send L_Data low from 0.0.0 to 0/0/3 hops: 07 T_DATA_XXX_REQ A_GroupValue_Write 01
Layer 1(09F84680,4E47D2FF) SendTunnel(016): 04 45 00 00 11 00 BC F0 00 00 00 03 02 00 80 01
Layer 1(09F84B78,4E47D2FF) Send(016): 04 45 00 00 11 00 BC F0 00 00 00 03 02 00 80 01
Layer 0(09F84B78,4E47D2FF) Send(022): 06 10 04 20 00 16 04 45 00 00 11 00 BC F0 00 00 00 03 02 00 80 01
Layer 2(09F84680,4E47D2FF) Recv L_Data low from 0.0.0 to 0/0/3 hops: 07 T_DATA_XXX_REQ A_GroupValue_Write 01
Layer 3(09FA5290,4E47D2FF) Recv L_Data low from 0.0.0 to 0/0/3 hops: 07 T_DATA_XXX_REQ A_GroupValue_Write 01
Layer 8(09FD5CD0,4E47D2FF) Send_Route L_Data low from 0.0.0 to 0/0/3 hops: 06 T_DATA_XXX_REQ A_GroupValue_Write 01
Layer 1(09FD5D40,4E47D2FF) Send(012): 29 00 BC E0 00 00 00 03 02 00 80 01
Layer 0(09FD5D40,4E47D2FF) Send(018): 06 10 05 30 00 12 29 00 BC E0 00 00 00 03 02 00 80 01
Layer 0(09F84B78,4E47D2FF) Recv(010): 06 10 04 21 00 0A 04 45 00 00
Layer 1(09F84B78,4E47D2FF) Recv(004): 04 45 00 00
Layer 7(0A0085F4,4E47D2FF) CloseGroup
Layer 4(09FF70A8,4E47D2FF) CloseGroup
Layer 3(09FA5290,4E47D2FF) deregisterGroupCallBack 09FF70A8 = 0
Layer 8(09FF7060,4E47D2FF) ClientConnection closed
Layer 0(09F84B78,4E47D2FF) Recv(022): 06 10 04 20 00 16 04 45 00 00 2E 00 BC F0 FF FF 00 03 02 00 80 01
Layer 1(09F84B78,4E47D2FF) Recv(016): 04 45 00 00 2E 00 BC F0 FF FF 00 03 02 00 80 01
Layer 1(09F84B78,4E47D2FF) Send(004): 04 45 00 00
Layer 0(09F84B78,4E47D2FF) Send(010): 06 10 04 21 00 0A 04 45 00 00
^CLayer 8(09FB5620,4E47D310) StopServer

Ps, i must use the real ip instead of the local one. Don't think that this is important, but maybe nice to know...

[posde]

brononi,

if you have problems when you use groupwrite, check with the bcusdk guys. That's all part of the eibd arena, maybe they have an idea of what's going on. It has nothing to do with LinuxMCE. See, if you can get help with them, if you can't get back, and we will try to investigate further.

[brononius]

Hey,

I'm back. And a bit closer to the solution.

With the help of Martin and the forum of KNX Germany, i've learned that there's a difference between groupwrite and groupswrite (bin and hex).
And when i run in a terminal "groupswrite ip:127.0.0.1 1/1/212 1", the lights are turned on.
And with "groupswrite ip:127.0.0.1 1/1/212 0", the lights are turned out.

When i now add this 1/1/212 into the template, it doesn't work.

Can this have something to do with the groupwrite / groupswrite difference?

[hari]

did you do a quick reload after changing the port/channel to that new value?

br Hari

[brononius]

The problem was my EIB interface apperantly.

When i:
- removed this one
- reloaded router
- recreated it (interface > EIB interface > advance ip 127.0.0.1)
- reloaded router
- put a light switch in (controlled by EIB) > only one group address (fe 0/0/3)
- reloaded router

And YEZZZZZ, light are on/off by the test buttons...


ps i'm going to write my installation steps down as clean as possible, I'll post them shortly...