Author Topic: How to setuo sccp.conf and use SCCP under Asterisk  (Read 8810 times)

bulek

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 909
  • Living with LMCE
    • View Profile
How to setuo sccp.conf and use SCCP under Asterisk
« on: November 30, 2011, 01:16:33 am »
Hi,

I've 3 7970 phones and they worked quite ok under 7.10. I'd like them to work under newer versions of LMCE - they also support a lot of various features that can be put in config file. But when I take a look at this config files, they all seem a bit cryptic for me.

Does anyone know of any document that would (shortly) explain features & settings of sccp channel under asterisk ?

Regards,

Bulek
 
Thanks in advance,

regards,

Bulek.

cafedumonde

  • Veteran
  • ***
  • Posts: 122
    • View Profile
Re: How to setuo sccp.conf and use SCCP under Asterisk
« Reply #1 on: December 05, 2011, 04:26:34 pm »

I have one 7970, that is working fine under 810 using SCCP. I just used the instructions in with Wiki after a fresh install.

CDM

bulek

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 909
  • Living with LMCE
    • View Profile
Re: How to setuo sccp.conf and use SCCP under Asterisk
« Reply #2 on: December 08, 2011, 09:25:13 pm »
I have one 7970, that is working fine under 810 using SCCP. I just used the instructions in with Wiki after a fresh install.

CDM

Hi,

thanks for response. Could you please post some more details about how it looks (Asterisk version, your /etc/sccp.conf ) ??

It will help me a lot...

Regards,

Bulek.
Thanks in advance,

regards,

Bulek.

daballiemo

  • Guru
  • ****
  • Posts: 244
  • Full Blown Addict
    • View Profile
Re: How to setuo sccp.conf and use SCCP under Asterisk
« Reply #3 on: December 11, 2011, 11:15:08 am »
I have (among others) a 7970, this is the sscp.conf. The 7970 has 2 lines. One especially for a door bell.

Code: [Select]
; (SCCP*)
;
; An implementation of Skinny Client Control Protocol (SCCP)
;
; Sergio Chersovani (mlists@c-net.it)
; http://chan-sccp.belios.de
;
; Supported phone types
;    12 -- Cisco IP Phone 12SP+ (or other 12 variants)
;    30 -- Cisco IP Phone 30VIP (or other 30 variants)
;  7902 -- Cisco IP Phone 7902G
;  7905 -- Cisco IP Phone 7905G
;  7910 -- Cisco IP Phone 7910
;  7912 -- Cisco IP Phone 7912G
;  7935 -- Cisco IP Conference Station 7935
;  7936 -- Cisco IP Conference Station 7936
;  7920 -- Cisco IP Wireless Phone 7920
;  7940 -- Cisco IP Phone 7940
;  7960 -- Cisco IP Phone 7960
;  7970 -- Cisco IP Phone 7970
;  7914 -- Cisco IP Phone 7960 with a 7914 addon
;   ata -- Cisco ATA-186 or Cisco ATA-188 (untested)

[general]
keepalive = 60               ; phone keep alive message evey 60 secs. Used to check the voicemail
debug = 1                    ; console debug level. 1 => 10
context = from-internal      ; default context for calls
dateFormat = D.M.Y           ; M-D-Y in any order. Use M/D/YA (for 12h format)
bindaddr = 192.168.80.1 ; replace with the ip address of the asterisk server (RTP important param)
port = 2000                  ; listen on port 2000 (Skinny, default)
disallow = all               ; First disallow all codecs
allow = alaw                 ; Allow codecs in order of preference
allow = ulaw                 ;
dnd = off                    ;
firstdigittimeout = 30       ; dialing timeout for the 1st digit
digittimeout = 3             ; more digits
autoanswer_ring_time = 1     ; ringing time in seconds for the autoanswer, the default is 0
autoanswer_tone = 0x32       ; autoanswer confirmation tone. For a complete list of tones: grep SKINNY_TONE sccp_protocol.h
                             ; not all the tones can be played in a connected state, so you have to try.
remotehangup_tone = 0x32     ; passive hangup notification. 0 for none
transfer_tone = 0            ; confirmation tone on transfer. Works only between SCCP devices
language=nl                  ; Default language setting this setting also sets the voicemailbox language
musicclass=han               ; Sets the default music on hold class


[devices]
;<pl_dev_183>
type = 7970
description = SEP0015FAEAB924
autologin = 220,222
transfer = on
park = on
speeddial =
cfwdall = off
cfwdbusy = off
dtmfmode = inband
device => SEP0015FAEAB924
;</pl_dev_183>
;<pl_dev_187>
type = 7970
description = SEP000D282E7921
autologin = 222
transfer = on
park = on
speeddial =
cfwdall = off
cfwdbusy = off
dtmfmode = inband
device => SEP000D282E7921
;</pl_dev_187>

[lines]
;<pl_line_183>
id = 220
pin =
label = 220
description = 220
context = from-internal
incominglimit = 2
transfer = on
secondary_dialtone_digits = 9
secondary_dialtone_tone = 0x22
cid_name = pl_183
cid_num = 220
line => 220
;</pl_line_183>
;<pl_line_187>
id = 222
pin =
label = 222
description = 222
context = from-internal
incominglimit = 2
transfer = on
secondary_dialtone_digits = 9
secondary_dialtone_tone = 0x22
cid_name = pl_187
cid_num = 222
line => 222
;</pl_line_187>
HP N40L12.04 KVM with virt LCME8.10/10.04
MD: FoxConn NetBox 330I - Samsung LE 26 (1360* 768)
MD: M2NPV-VM dual core AMD 64/3800/2Gb/NV6150 - Samsung UE 55 C8700 (full hd, 3d)
MD: FoxConn NetBox 330I - LG 32ld350

bulek

  • Administrator
  • wants to work for LinuxMCE
  • *****
  • Posts: 909
  • Living with LMCE
    • View Profile
Re: How to setuo sccp.conf and use SCCP under Asterisk
« Reply #4 on: December 12, 2011, 03:56:36 pm »
I have (among others) a 7970, this is the sscp.conf. The 7970 has 2 lines. One especially for a door bell.

....

Thanks for response and info. How is your doorbell connected to asterisk - is it just ordinary extension ? Is this setup different from setup where doorbell call comes in and goes to other phones by nornal call routing ?

Thanks in advance,

regards,

Bulek.
Thanks in advance,

regards,

Bulek.

daballiemo

  • Guru
  • ****
  • Posts: 244
  • Full Blown Addict
    • View Profile
Re: How to setuo sccp.conf and use SCCP under Asterisk
« Reply #5 on: December 12, 2011, 09:09:19 pm »
Yup, I only have the doorbell routing to one phone instead of ringing all the phone. Within asterisk I have made a ringing group that is called by the door extension, and this extra line is the only extension in this ringing group except for my mobile phone.
HP N40L12.04 KVM with virt LCME8.10/10.04
MD: FoxConn NetBox 330I - Samsung LE 26 (1360* 768)
MD: M2NPV-VM dual core AMD 64/3800/2Gb/NV6150 - Samsung UE 55 C8700 (full hd, 3d)
MD: FoxConn NetBox 330I - LG 32ld350

bugui

  • Veteran
  • ***
  • Posts: 70
    • View Profile
Re: How to setuo sccp.conf and use SCCP under Asterisk
« Reply #6 on: December 13, 2011, 06:22:07 am »
Hi daballiemo,
Do you have a camera on your system?

Thanks
Hernan

daballiemo

  • Guru
  • ****
  • Posts: 244
  • Full Blown Addict
    • View Profile
Re: How to setuo sccp.conf and use SCCP under Asterisk
« Reply #7 on: December 14, 2011, 08:31:23 pm »
Hi daballiemo,
Do you have a camera on your system?

Thanks
Hernan


I do not understand the question in relation to the subject of this thread  ??? Maybe you have to explain....
HP N40L12.04 KVM with virt LCME8.10/10.04
MD: FoxConn NetBox 330I - Samsung LE 26 (1360* 768)
MD: M2NPV-VM dual core AMD 64/3800/2Gb/NV6150 - Samsung UE 55 C8700 (full hd, 3d)
MD: FoxConn NetBox 330I - LG 32ld350

stallione

  • Veteran
  • ***
  • Posts: 63
    • View Profile
Re: How to setuo sccp.conf and use SCCP under Asterisk
« Reply #8 on: December 16, 2011, 08:48:11 pm »
I think he was asking about a door-bell camera, or a camera tied to the doorbell to see who is at the door. :)

daballiemo

  • Guru
  • ****
  • Posts: 244
  • Full Blown Addict
    • View Profile
Re: How to setuo sccp.conf and use SCCP under Asterisk
« Reply #9 on: December 18, 2011, 05:50:43 pm »
I think he was asking about a door-bell camera, or a camera tied to the doorbell to see who is at the door. :)

I see, no I don't.

kr
HP N40L12.04 KVM with virt LCME8.10/10.04
MD: FoxConn NetBox 330I - Samsung LE 26 (1360* 768)
MD: M2NPV-VM dual core AMD 64/3800/2Gb/NV6150 - Samsung UE 55 C8700 (full hd, 3d)
MD: FoxConn NetBox 330I - LG 32ld350