Author Topic: Ethernet Commands for networked DirecTV boxes  (Read 6452 times)

bwhitson

  • Regular Poster
  • **
  • Posts: 25
    • View Profile
Ethernet Commands for networked DirecTV boxes
« on: May 21, 2011, 06:26:31 am »
Ok...

After some reading, searching, head scratching, etc... I have stumbled upon some command strings that work for most advanced DirecTV receivers.  I'm not sure how to implement this into a template but the one out there for the HR24 did not work for me at all. If someone would point me at an article explaning how to get these commands to work with LMCE I would gladly create a template for the HRXX and HXX (excluding the H20 series of course - no network port).

Commands can be sent by sending a simple HTTP line. such as

http://192.168.50.13:8080/tv/tune?major=202&minor=65535

All a person would have to do is change the IP address to the correct one for their box and the STP would change to channel 202.

The following line is a template for the HTTP string.

http://192.168.50.13:8080/remote/processKey?key=guide&hold=keyPress

It sends the "guide" command to the STP listed in the IP field.

The commands power, poweron, poweroff, format, pause, rew, replay, stop, advance, ffwd, record, play, guide, active, list, exit, back, menu, info, up, down, left, right, select, red, green, yellow, blue, chanup, chandown, prev,0, 1, 2, 3, 4, 5, 6, 7, 8, 9, dash, and enter can be substituted for the word guide.

-B
Duct Tape is like the force - It has a dark side and holds the universe together.

bwhitson

  • Regular Poster
  • **
  • Posts: 25
    • View Profile
Re: Ethernet Commands for networked DirecTV boxes
« Reply #1 on: May 21, 2011, 06:48:29 am »
P.S.

I forgot to mention that after sending this line the receiver will report back with a "Command OK" window.
Not sure if that makes a difference but thought I'd mention just the same.
 ;D

-B

Duct Tape is like the force - It has a dark side and holds the universe together.

hari

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 2428
    • View Profile
    • ago control
Re: Ethernet Commands for networked DirecTV boxes
« Reply #2 on: May 21, 2011, 09:23:02 am »
Look at the nokia dbox2/neutrino template
rock your home - http://www.agocontrol.com home automation