Author Topic: zigbee support  (Read 10245 times)

alexvd

  • Regular Poster
  • **
  • Posts: 15
    • View Profile
zigbee support
« on: March 24, 2011, 09:27:57 pm »
I realize that this is probably asking way too much but is thier any plans to support zigbee?  I think I had asked before and hari said no.  I realize its a ton of work but just curious if this could be done.

One of the strengths of LMCE is that it can support so many different protocols.   Its what keeps me coming back vs going out and buying homeseer or control4.   

The reason I ask is that I have a bunch of zwave sensors but thier are also some zigbee devices I would like but I cant use or support because they are zigbee only.   

If not support exists does anyone know of a bridge.  Would  that be even feasible.  I see that someone wrote a HAI bridge so I guess it might be possible.  The only bridge I saw was from Bulogics but I think that is only for smartmetering.


Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3675
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: zigbee support
« Reply #1 on: March 25, 2011, 09:33:17 am »
alexvd,

get a Zigbee controller and documentation to hari. I am sure, when he has time, he will take a look at it.

However, you will find out, that it is very hard for regular folks to get their hands on a Zigbee controller that you can attach and control from a computer.

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5549
  • DOES work for LinuxMCE.
    • View Profile
Re: zigbee support
« Reply #2 on: March 25, 2011, 10:44:22 am »
I've had long discussions with Crestron and Control4 and AMX professionals, and have come to the conclusion that the various members of the Zigbee consortium don't WANT a computer that's not Crestron, AMX, Control4, etc, to be able to control ZigBee devices. The whole standard has been a shoddy slip-shot from the beginning, only recently gaining the equivalent of standardized command classes....but the simple truth is, that ZigBee computer interfaces for off the shelf computers do not exist.

-Thom

alexvd

  • Regular Poster
  • **
  • Posts: 15
    • View Profile
Re: zigbee support
« Reply #3 on: March 25, 2011, 01:33:16 pm »
I work for a company that recently put funding into Control4 and is now OEMing their product.  I will ask internally if thier is anyway to get a controller or documentation.  Its for internal use only and not for resale so it shouldnt violate any terms.  If I can get one I will send it to hari.


tkmedia

  • wants to work for LinuxMCE
  • **
  • Posts: 937
    • View Profile
    • LMCECompatible
Re: zigbee support
« Reply #4 on: March 25, 2011, 06:54:45 pm »
I have contacted a company regarding a  Zwave to zigbee bridge.

I will post more info when i get it.


Tim
My Setup http://wiki.linuxmce.org/index.php/User:Tkmedia

For LinuxMce compatible  systems and accessories
http://lmcecompatible.com/

alexvd

  • Regular Poster
  • **
  • Posts: 15
    • View Profile
Re: zigbee support
« Reply #5 on: March 26, 2011, 02:31:36 pm »
Tim that is great news.  Please share it when you can.

Marie.O

  • Administrator
  • LinuxMCE God
  • *****
  • Posts: 3675
  • Wastes Life On LinuxMCE Since 2007
    • View Profile
    • My Home
Re: zigbee support
« Reply #6 on: March 26, 2011, 02:43:14 pm »
Why would anyone want Zigbee when Z-Wave is readily available? Are there any devices which are Zigbee only?

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5549
  • DOES work for LinuxMCE.
    • View Profile
Re: zigbee support
« Reply #7 on: March 26, 2011, 02:45:03 pm »
good question. you can't even _GET_ Zigbee devices by themselves at present. They're all part of a "system"

Why are people so caught up in this?

-Thom

ardirtbiker

  • Guru
  • ****
  • Posts: 308
    • View Profile
Re: zigbee support
« Reply #8 on: March 26, 2011, 05:14:53 pm »
like OMG... its the latest thing!!!!!   gotta have it    ;D

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: zigbee support
« Reply #9 on: March 28, 2011, 03:30:36 pm »
Why would anyone want Zigbee when Z-Wave is readily available? Are there any devices which are Zigbee only?

Well I have to say we have looked at this numerous times since 2004 and Zigbee just does not stack-up either in technical terms (as Tschakee says) or commercially either. There are several OEM's building a very limited range of devices but none of them are interoperable with each other (ie vendor 'a' to vendor 'b') and they are not available to end-users anyway.

All the best


Andrew
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

PatrickD

  • Making baby steps
  • Posts: 2
    • View Profile
Re: zigbee support
« Reply #10 on: March 30, 2011, 06:58:17 am »
My appologies for jumping into your thread, but I have been doing a lot of research on the possibility of a Zigbee to Zwave bridge mainly because here in California PG&E is switching everyone to Smartmeters. I have Zwave controllers and it seems that bulogics is developing a bridge that would allow for monitoring the Zigbee feed and allow for Zwave to control (via Homeseer or someother controller) to make changes to your energy usage by changing HA conditions in your home. From bulogics:

"The Z-Wave to ZigBee Bridge can actually ask the Smart Grid questions and receive important information such as when a peak load event is happening, or when price changes will occur.  This is valuable to consumers because they can “associate” certain appliances within the Z-Wave home ecosystem to automatically “turn off” during peak load times, when prices are at their highest. Conversely, it allows the Smart Grid to communicate with a Z-Wave home ecosystem, thus bridging the two technology standards together."

If anyone has any thoughts I would greatly appreciate your input!

Thanks!

Patrick

totallymaxed

  • LinuxMCE God
  • ****
  • Posts: 4660
  • Smart Home Consulting
    • View Profile
    • Dianemo - at home with technology
Re: zigbee support
« Reply #11 on: March 30, 2011, 09:57:06 am »
My appologies for jumping into your thread, but I have been doing a lot of research on the possibility of a Zigbee to Zwave bridge mainly because here in California PG&E is switching everyone to Smartmeters. I have Zwave controllers and it seems that bulogics is developing a bridge that would allow for monitoring the Zigbee feed and allow for Zwave to control (via Homeseer or someother controller) to make changes to your energy usage by changing HA conditions in your home. From bulogics:

"The Z-Wave to ZigBee Bridge can actually ask the Smart Grid questions and receive important information such as when a peak load event is happening, or when price changes will occur.  This is valuable to consumers because they can “associate” certain appliances within the Z-Wave home ecosystem to automatically “turn off” during peak load times, when prices are at their highest. Conversely, it allows the Smart Grid to communicate with a Z-Wave home ecosystem, thus bridging the two technology standards together."

If anyone has any thoughts I would greatly appreciate your input!

Thanks!

Patrick

Well supporting specific ZWave<->Zigbee bridges is certainly possible and would sound like a worthwhile exercise in the case of the Smart Meters you mention. I expect in each case (as in this one in fact) that the Zigbee side of the bridge will be limited to communicating with the specific 'brand' of device it was designed for. But in this type of application thats not really an issue at all.

Definitely worth some effort if some has the inclination and access to the right hardware etc.

All the best


Andrew

 
Andy Herron,
CHT Ltd

For Dianemo/LinuxMCE consulting advice;
@herron on Twitter, totallymaxed+inquiries@gmail.com via email or PM me here.

Get Dianemo-Rpi2 ARM Licenses http://forum.linuxmce.org/index.php?topic=14026.0

Get RaspSqueeze-CEC or Raspbmc-CEC for Dianemo/LinuxMCE: http://wp.me/P4KgIc-5P

Facebook: https://www.facebook.com/pages/Dianemo-Home-Automation/226019387454465

http://www.dianemo.co.uk

PatrickD

  • Making baby steps
  • Posts: 2
    • View Profile
Re: zigbee support
« Reply #12 on: March 30, 2011, 11:49:19 am »
Thanks Adrew

I am a bit of a techno geek but have spent the last 25 years in the Fire life safety business with Tyco, GE, Seimens and the like. My real interests are the on HA side of things - hobby as you will. I've been a Homeseer guy for about 11 years but I checked out your site and it looks very interesting.

Thanks for you your reply

Patrick