Author Topic: Connecting A USB DVD Drive  (Read 3677 times)

twodogs

  • Guru
  • ****
  • Posts: 224
    • View Profile
Connecting A USB DVD Drive
« on: March 20, 2011, 09:47:41 pm »
I'll start with an apology. I think that forum etiquette requires member to give as much as they get, and I'm in negative numbers at the moment. All I can say is that my ultimate goal is to have a working system, contribute to the wiki, and take on some development responsibilities.
Now that my remote is working, I'd like to be able to play a DVD. I've installed libdvdcss2 and I can play a DVD in my basement using the drive installed in my hybrid core. However, my main TV is on the second floor. Next to my TV, I have a USB DVD drive connected to a hub, connected to a USB extender, connected to the core. Some might doubt that such a scheme could work, but it worked great a few weeks ago. I could use the menu overlay to pick "manage disk drives" and I would see the DVD on the core, and also the USB drive. I could insert and watch a movie using either drives. Now all I see is the drive installed in my core.
I looked in the wiki manual to see how I could fix it and found "Normally everything is setup for you automatically. If you're experiencing problems, go to Wizard > Devices > Media Directors and be sure the appropriate media players are checked and a disk drive is checked." I did this and looked for a place to put a checkmark, but there was no such option.

http://



Uploaded with ImageShack.us

« Last Edit: March 20, 2011, 09:51:14 pm by twodogs »
http://greenrenovation.wordpress.com/home-automation/
system:
ASUS P5N7A-VM
integrated GeForce 9300
E5200 processor
Fusion 5 lite HDTV card
2G RAM
SYBA SY-PCI15001 6-port serial card
Denon AVR 3805
LG 42" Plasma
Gyration GYR3101
Cisco SPA3102 analog telephone adapter
Cisco 7971G IP phone/orbiter

tschak909

  • LinuxMCE God
  • ****
  • Posts: 5549
  • DOES work for LinuxMCE.
    • View Profile
Re: Connecting A USB DVD Drive
« Reply #1 on: March 20, 2011, 10:36:19 pm »
as long as there is a Disk Drive device in the device tree, it will do the right thing. Yes, USB optical drives work just fine.

Make sure, if it fails for some reason, that:

(1) the Disk Drive device is registered
(2) the Block device devicedata for the Disk Drive matches the /dev/srX entry for your DVD drive.

-Thom

twodogs

  • Guru
  • ****
  • Posts: 224
    • View Profile
Re: Connecting A USB DVD Drive
« Reply #2 on: March 20, 2011, 11:30:00 pm »
I entered admin and clicked the device tree at bottom on the left pane. There is a disk drive device (but only one). It has a checkmark next to "registered" (see screenshot). Not too sure how to confirm your second item.
As a new user, I don't know the expected behavior of the system. A few weeks ago there were two entries when I clicked on "manage disk drives". If I had put movie in the drives, the titles would display. I could click eject on either one to open the door. Now I'm only seeing one drive.



Uploaded with ImageShack.us



Uploaded with ImageShack.us

John
http://greenrenovation.wordpress.com/home-automation/
system:
ASUS P5N7A-VM
integrated GeForce 9300
E5200 processor
Fusion 5 lite HDTV card
2G RAM
SYBA SY-PCI15001 6-port serial card
Denon AVR 3805
LG 42" Plasma
Gyration GYR3101
Cisco SPA3102 analog telephone adapter
Cisco 7971G IP phone/orbiter

ardirtbiker

  • Guru
  • ****
  • Posts: 308
    • View Profile
Re: Connecting A USB DVD Drive
« Reply #3 on: March 21, 2011, 12:42:23 am »
another silly question...

is your main tv connected to the core as well?   or on a diskless Media Director?

if the latter, did you also install libdvdcss2 on that as well?


Dennis

twodogs

  • Guru
  • ****
  • Posts: 224
    • View Profile
Re: Connecting A USB DVD Drive
« Reply #4 on: March 21, 2011, 01:48:41 am »
Just the one hybrid core so far with everything connected directly. I'm starting small and expanding features one at a time. Once we've finished renovating our first floor I'll add a media director. Until then, my upcoming projects are:

Fix Gyration remote - (done) thanks Dennis
Fix the USB DVD
Get Hulu working
Get Insteon lighting to work
Get 1-wire temp sensing to work
Maybe buy Hauppauge Colossus and integrate DirecTV

It has been slow going so far, but things are getting slightly easier as I continue to learn the system. I'd love to help organize the wiki to make info easier to find. I really hate crying to the forums.

John
http://greenrenovation.wordpress.com/home-automation/
system:
ASUS P5N7A-VM
integrated GeForce 9300
E5200 processor
Fusion 5 lite HDTV card
2G RAM
SYBA SY-PCI15001 6-port serial card
Denon AVR 3805
LG 42" Plasma
Gyration GYR3101
Cisco SPA3102 analog telephone adapter
Cisco 7971G IP phone/orbiter

ardirtbiker

  • Guru
  • ****
  • Posts: 308
    • View Profile
Re: Connecting A USB DVD Drive
« Reply #5 on: March 21, 2011, 03:23:21 am »
I hear ya... I'll be learning for years!

I dont think i have the smarts to help with your DVD issue though.


Dennis

twodogs

  • Guru
  • ****
  • Posts: 224
    • View Profile
Re: Connecting A USB DVD Drive
« Reply #6 on: March 22, 2011, 04:59:19 am »
I reinstalled using the latest snapshot and now both DVD drives appear. I consider this the LMCE version of throwing a maiden into a volcano to make the crops grow.

I entered admin and looked at the disk device to see what was different from my last installation where only one DVD worked. There was no difference.
http://greenrenovation.wordpress.com/home-automation/
system:
ASUS P5N7A-VM
integrated GeForce 9300
E5200 processor
Fusion 5 lite HDTV card
2G RAM
SYBA SY-PCI15001 6-port serial card
Denon AVR 3805
LG 42" Plasma
Gyration GYR3101
Cisco SPA3102 analog telephone adapter
Cisco 7971G IP phone/orbiter