Panasonic BL-C10 - should be PnP? And template/motionwrapper queries

[purps]

Thanks for that Karel, very kind. What make of camera is this for by the way?

I got ZoneMinder installed on the core, and managed to set up my Panasonics (no luck with my Foscams yet though), and I have to say it seems like a very nice piece of software.

I still want to try and get motion wrapper working though, I've had a little bit of success with my Foscam (thanks b4rney!) and would like to get it working with the Panasonics also.

[DragonK]

My camera is an Edimax,

http://wiki.linuxmce.org/index.php/Edimax_IC1510

Karel

[Crawtech]

Hi
Yes i have Zoneminder installed and working on a different server though and works fine and I can bring up each of my 8 cameras on any orbitor in the house which is very cool one thing I fond was I had to set the resolution to 640X480 other wise LinuxMCE was not work 
maybe this is the problem you are having with this line   "http://192.168.80.xxx/nphMotionJpeg?Resolution=320x240&Quality=Motion"  change Resolution to 640X480


Hope this helps

Chris

[purps]

Thanks Chris, your advice (along with b4rney's Foscam page http://wiki.linuxmce.org/index.php/Foscam_FI8908W) has enabled me to get this device working motion wrapper.

Regarding the PTZ problem; I have added the camera a second time with the Panasonic template, specifically for use with the relevant orbiter scenario (giving me PTZ), with the first one (added with the generic motion template) dedicated to recordings via motion wrapper.

I was concerned there would be a conflict of some description, but following various PTZ movements through the orbiter, combined with much jumping up and down, hand waving, etc, to trigger some recordings, it all seems to be working fine. Have I overlooked any reason as to why this might be a bad idea?

Cheers,
Matt.

[b4rney]

Matt,

Does this mean you have the cameras working with both on screen PTZ and motion wrapper?

Barney

[purps]

As far as I can tell, yes! Only disadvantage I can see (at this moment in time) is that the camera needs to be added twice.

Cheers,
Matt.

[b4rney]

Ahh I see. Just re-read your post.
Barney